root@libing-desktop:~# fdisk /dev/sdb
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): p
Disk /dev/sdb: 1977 MB, 1977614336 bytes
64 heads, 63 sectors/track, 957 cylinders
Units = cylinders of 4032 * 512 = 2064384 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 1 957 1929244+ 6 FAT16
Command (m for help): ls
0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris
1 FAT12 39 Plan 9 82 Linux swap / So c1 DRDOS/sec (FAT-
2 XENIX root 3c PartitionMagic 83 Linux c4 DRDOS/sec (FAT-
3 XENIX usr 40 Venix 80286 84 OS/2 hidden C: c6 DRDOS/sec (FAT-
4 FAT16 <32M 41 PPC PReP Boot 85 Linux extended c7 Syrinx
5 Extended 42 SFS 86 NTFS volume set da Non-FS data
6 FAT16 4d QNX4.x 87 NTFS volume set db CP/M / CTOS / .
7 HPFS/NTFS 4e QNX4.x 2nd part 88 Linux plaintext de Dell Utility
8 AIX 4f QNX4.x 3rd part 8e Linux LVM df BootIt
9 AIX bootable 50 OnTrack DM 93 Amoeba e1 DOS access
a OS/2 Boot Manag 51 OnTrack DM6 Aux 94 Amoeba BBT e3 DOS R/O
b W95 FAT32 52 CP/M 9f BSD/OS e4 SpeedStor
c W95 FAT32 (LBA) 53 OnTrack DM6 Aux a0 IBM Thinkpad hi eb BeOS fs
e W95 FAT16 (LBA) 54 OnTrackDM6 a5 FreeBSD ee GPT
f W95 Ext'd (LBA) 55 EZ-Drive a6 OpenBSD ef EFI (FAT-12/16/
10 OPUS 56 Golden Bow a7 NeXTSTEP f0 Linux/PA-RISC b
11 Hidden FAT12 5c Priam Edisk a8 Darwin UFS f1 SpeedStor
12 Compaq diagnost 61 SpeedStor a9 NetBSD f4 SpeedStor
14 Hidden FAT16 <3 63 GNU HURD or Sys ab Darwin boot f2 DOS secondary
16 Hidden FAT16 64 Novell Netware af HFS / HFS+ fb VMware VMFS
17 Hidden HPFS/NTF 65 Novell Netware b7 BSDI fs fc VMware VMKCORE
18 AST SmartSleep 70 DiskSecure Mult b8 BSDI swap fd Linux raid auto
1b Hidden W95 FAT3 75 PC/IX bb Boot Wizard hid fe LANstep
1c Hidden W95 FAT3 80 Old Minix be Solaris boot ff BBT
1e Hidden W95 FAT1
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): d
Selected partition 1
Command (m for help): p
Disk /dev/sdb: 1977 MB, 1977614336 bytes
64 heads, 63 sectors/track, 957 cylinders
Units = cylinders of 4032 * 512 = 2064384 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-957, default 1): 1
Last cylinder, +cylinders or +size{K,M,G} (1-957, default 957): 957
Command (m for help): t
Selected partition 1
Hex code (type L to list codes): c
Changed system type of partition 1 to c (W95 FAT32 (LBA))
Command (m for help): p
Disk /dev/sdb: 1977 MB, 1977614336 bytes
64 heads, 63 sectors/track, 957 cylinders
Units = cylinders of 4032 * 512 = 2064384 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 1 957 1929280+ c W95 FAT32 (LBA)
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: 设备或资源忙.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
WARNING: If you have created or modified any DOS 6.x
partitions, please see the fdisk manual page for additional
information.
Syncing disks.
root@libing-desktop:~# fdisk /dev/sdb
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): p
Disk /dev/sdb: 1977 MB, 1977614336 bytes
64 heads, 63 sectors/track, 957 cylinders
Units = cylinders of 4032 * 512 = 2064384 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 1 957 1929280+ c W95 FAT32 (LBA)
Command (m for help): q
root@libing-desktop:~# fdisk /dev/sdb
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): d
Selected partition 1
Command (m for help): p
Disk /dev/sdb: 1977 MB, 1977614336 bytes
64 heads, 63 sectors/track, 957 cylinders
Units = cylinders of 4032 * 512 = 2064384 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-957, default 1): 7
Last cylinder, +cylinders or +size{K,M,G} (7-957, default 957): 508
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (1-957, default 1): 509
Last cylinder, +cylinders or +size{K,M,G} (509-957, default 957): 660
Command (m for help): n
Command action
e extended
p primary partition (1-4)
e
Partition number (1-4): 3
First cylinder (1-957, default 1): 661
Last cylinder, +cylinders or +size{K,M,G} (661-957, default 957): 930
Command (m for help): n
Command action
l logical (5 or over)
p primary partition (1-4)
p
Selected partition 4
First cylinder (1-957, default 1): 931
Last cylinder, +cylinders or +size{K,M,G} (931-957, default 957): 957
Command (m for help): n
First cylinder (661-930, default 661): 661
Last cylinder, +cylinders or +size{K,M,G} (661-930, default 930): 880
Command (m for help): n
First cylinder (881-930, default 881): 881
Last cylinder, +cylinders or +size{K,M,G} (881-930, default 930): 930
Command (m for help): t
Partition number (1-6): 1
Hex code (type L to list codes): c
Changed system type of partition 1 to c (W95 FAT32 (LBA))
Command (m for help): p
Disk /dev/sdb: 1977 MB, 1977614336 bytes
64 heads, 63 sectors/track, 957 cylinders
Units = cylinders of 4032 * 512 = 2064384 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 7 508 1012032 c W95 FAT32 (LBA)
/dev/sdb2 509 660 306432 83 Linux
/dev/sdb3 661 930 544320 5 Extended
/dev/sdb4 931 957 54432 83 Linux
/dev/sdb5 661 880 443488+ 83 Linux
/dev/sdb6 881 930 100768+ 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: 设备或资源忙.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
WARNING: If you have created or modified any DOS 6.x
partitions, please see the fdisk manual page for additional
information.
Syncing disks.
root@libing-desktop:~# fdisk /dev/sdb
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): p
Disk /dev/sdb: 1977 MB, 1977614336 bytes
64 heads, 63 sectors/track, 957 cylinders
Units = cylinders of 4032 * 512 = 2064384 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 7 508 1012032 c W95 FAT32 (LBA)
/dev/sdb2 509 660 306432 83 Linux
/dev/sdb3 661 930 544320 5 Extended
/dev/sdb4 931 957 54432 83 Linux
/dev/sdb5 661 880 443488+ 83 Linux
/dev/sdb6 881 930 100768+ 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
root@libing-desktop:~# mkfs.vfat /dev/sdb1
mkfs.vfat 3.0.7 (24 Dec 2009)
root@libing-desktop:~# mkfs.ext4 /dev/sdb2 -O ^extent -L system
mke2fs 1.41.11 (14-Mar-2010)
文件系统标签=system
操作系统:Linux
块大小=1024 (log=0)
分块大小=1024 (log=0)
Stride=0 blocks, Stripe width=0 blocks
76608 inodes, 306432 blocks
15321 blocks (5.00%) reserved for the super user
第一个数据块=1
Maximum filesystem blocks=67633152
38 block groups
8192 blocks per group, 8192 fragments per group
2016 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729, 204801, 221185
正在写入inode表: 完成
Creating journal (8192 blocks): 完成
Writing superblocks and filesystem accounting information: 完成
This filesystem will be automatically checked every 23 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
root@libing-desktop:~# mkfs.ext4 /dev/sdb4 -O ^extent -L recovery
mke2fs 1.41.11 (14-Mar-2010)
文件系统标签=recovery
操作系统:Linux
块大小=1024 (log=0)
分块大小=1024 (log=0)
Stride=0 blocks, Stripe width=0 blocks
13608 inodes, 54432 blocks
2721 blocks (5.00%) reserved for the super user
第一个数据块=1
Maximum filesystem blocks=55836672
7 block groups
8192 blocks per group, 8192 fragments per group
1944 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961
正在写入inode表: 完成
Creating journal (4096 blocks): 完成
Writing superblocks and filesystem accounting information: 完成
This filesystem will be automatically checked every 22 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
root@libing-desktop:~# mkfs.ext4 /dev/sdb5 -O ^extent -L data
mke2fs 1.41.11 (14-Mar-2010)
文件系统标签=data
操作系统:Linux
块大小=1024 (log=0)
分块大小=1024 (log=0)
Stride=0 blocks, Stripe width=0 blocks
110880 inodes, 443488 blocks
22174 blocks (5.00%) reserved for the super user
第一个数据块=1
Maximum filesystem blocks=67633152
55 block groups
8192 blocks per group, 8192 fragments per group
2016 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409
正在写入inode表: 完成
Creating journal (8192 blocks): 完成
Writing superblocks and filesystem accounting information: 完成
This filesystem will be automatically checked every 27 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
root@libing-desktop:~# mkfs.ext4 /dev/sdb6 -O ^extent -L cache
mke2fs 1.41.11 (14-Mar-2010)
文件系统标签=cache
操作系统:Linux
块大小=1024 (log=0)
分块大小=1024 (log=0)
Stride=0 blocks, Stripe width=0 blocks
25272 inodes, 100768 blocks
5038 blocks (5.00%) reserved for the super user
第一个数据块=1
Maximum filesystem blocks=67371008
13 block groups
8192 blocks per group, 8192 fragments per group
1944 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729
正在写入inode表: 完成
Creating journal (4096 blocks): 完成
Writing superblocks and filesystem accounting information: 完成
This filesystem will be automatically checked every 32 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
root@libing-desktop:~#
扫一扫
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
