UINavigationController

本文详细介绍了如何通过UINavigationController在iOS应用中实现页面之间的推转操作,包括创建窗口、导航控制器,以及如何通过按钮和UIBarButtonItem进行页面跳转。

通过UINavigationController实现页面推转

实现逻辑结构:

1.首先window,UINavigationController就创建在window上,并控制谁是首页,然后让window管理创建的导航控制器.

2.用导航控制器控制跳转

(1)导航栏可以建立item,但不能创建button,可以用button初始化一个item,但不能把button加到导航栏.

(2)也可以直接通过UIBarButtonItem直接初始化出item

(3)页面中无论item还是button实现跳转时都使用导航控制器实现,主要方法有pushViewController(类似入栈即推进到下一页),popViewControllerAnimated(类似出栈,返回前一页),popToViewController(通过控制后面参数直接实现跳转到某一页,参数一半通过数组控制).

(4)通过UINavigationController即可实现页面控制跳转,此时ViewController就不需要了.


主要.m文件代码:
//
//  AppDelegate.m
//  lesson_navgation
//
//  Created by lanouhn on 15-1-8.
//  Copyright (c) 2015年 lanouhn. All rights reserved.
//

#import "AppDelegate.h"
#import "FirstViewController.h"

@interface AppDelegate ()

@end

@implementation AppDelegate

//应用程序已经配置完成执行的方法
- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions {
    // Override point for customization after application launch.
    
    //1.创建window
    self.window = [[UIWindow alloc]initWithFrame:[UIScreen mainScreen].bounds];
    //2.显示window
    [self.window makeKeyAndVisible];
    self.window.backgroundColor=[UIColor purpleColor];
    
    //3.创建导航控制器
    FirstViewController *first = [[FirstViewController alloc]init];
    //导航控制器就把first当做首页显示
    UINavigationController *nav=[[UINavigationController alloc]initWithRootViewController:first];
    
    //4.让window管理创建的导航控制器
    self.window.rootViewController = nav;
    
    
    return YES;
}

- (void)applicationWillResignActive:(UIApplication *)application {
    // Sent when the application is about to move from active to inactive state. This can occur for certain types of temporary interruptions (such as an incoming phone call or SMS message) or when the user quits the application and it begins the transition to the background state.
    // Use this method to pause ongoing tasks, disable timers, and throttle down OpenGL ES frame rates. Games should use this method to pause the game.
}

- (void)applicationDidEnterBackground:(UIApplication *)application {
    // Use this method to release shared resources, save user data, invalidate timers, and store enough application state information to restore your application to its current state in case it is terminated later.
    // If your application supports background execution, this method is called instead of applicationWillTerminate: when the user quits.
}

- (void)applicationWillEnterForeground:(UIApplication *)application {
    // Called as part of the transition from the background to the inactive state; here you can undo many of the changes made on entering the background.
}

- (void)applicationDidBecomeActive:(UIApplication *)application {
    // Restart any tasks that were paused (or not yet started) while the application was inactive. If the application was previously in the background, optionally refresh the user interface.
}

- (void)applicationWillTerminate:(UIApplication *)application {
    // Called when the application is about to terminate. Save data if appropriate. See also applicationDidEnterBackground:.
}

@end
//
//  FirstViewController.m
//  lesson_navgation
//
//  Created by lanouhn on 15-1-8.
//  Copyright (c) 2015年 lanouhn. All rights reserved.
//

#import "FirstViewController.h"
#import "SecViewController.h"
@interface FirstViewController ()

@end

@implementation FirstViewController

- (void)viewDidLoad {
    [super viewDidLoad];
    self.view.backgroundColor = [UIColor greenColor];
    // Do any additional setup after loading the view.
    //buttonf方法实现页面推转
    UIButton *btn = [UIButton buttonWithType:UIButtonTypeCustom];
    btn.backgroundColor = [UIColor redColor];
    btn.frame=CGRectMake(100,350,120,50);
    [btn setTitle:@"Next" forState:UIControlStateNormal];
    [self.view addSubview:btn];
    [btn addTarget:self action:@selector(dobutton) forControlEvents:UIControlEventTouchDown];
    
    //1.设置标题
    //(1)
    //self.title = @"首页";
    //(2)
    self.navigationItem.title=@"首页";
    //(3)----添加图片等自定义情况时使用
    //系统自定义导航条高度44
    /*UILabel *label=[[UILabel alloc]initWithFrame:CGRectMake(0, 0, 100, 40)];
    label.text=@"首页";
    self.navigationItem.titleView=label;
     */
    
    //对导航条设置一个颜色
    [self.navigationController.navigationBar setBackgroundColor:[UIColor redColor]];
    
    //设置导航条上的按钮
    UIBarButtonItem *item=[[UIBarButtonItem alloc]initWithTitle:@"下一页" style:UIBarButtonItemStylePlain target:self action:@selector(doitem)];
    self.navigationItem.rightBarButtonItem=item;
    
    
    //用button初始化一个item,但不能把button加到导航条
    UIButton *button=[[UIButton alloc]initWithFrame:CGRectMake(0, 0, 60, 40)];
    [button setTitle:@"保存" forState:UIControlStateNormal];
    [button addTarget:self action:@selector(dosave) forControlEvents:UIControlEventTouchDown];
    //创造一个item
    UIBarButtonItem *leftItem = [[UIBarButtonItem alloc]initWithCustomView:button];
    self.navigationItem.leftBarButtonItem = leftItem;
}
-(void)dobutton
{    SecViewController *sec = [[SecViewController alloc]init];
    //用导航控制器推下一个界面
    [self.navigationController pushViewController:sec animated:YES];
}
-(void)doitem
{
    SecViewController *sec = [[SecViewController alloc]init];
    //用导航控制器推下一个界面
    [self.navigationController pushViewController:sec animated:YES];
}
-(void)dosave
{
    NSLog(@"Dosave");
}
- (void)didReceiveMemoryWarning {
    [super didReceiveMemoryWarning];
    // Dispose of any resources that can be recreated.
}

/*
#pragma mark - Navigation

// In a storyboard-based application, you will often want to do a little preparation before navigation
- (void)prepareForSegue:(UIStoryboardSegue *)segue sender:(id)sender {
    // Get the new view controller using [segue destinationViewController].
    // Pass the selected object to the new view controller.
}
*/

@end
//
//  SecViewController.m
//  lesson_navgation
//
//  Created by lanouhn on 15-1-8.
//  Copyright (c) 2015年 lanouhn. All rights reserved.
//
#import "SecViewController.h"
#import "ThdViewController.h"
@interface SecViewController ()

@end

@implementation SecViewController

- (void)viewDidLoad {
    [super viewDidLoad];
    self.view.backgroundColor = [UIColor greenColor];
    // Do any additional setup after loading the view.
    
    UIButton *btn = [UIButton buttonWithType:UIButtonTypeCustom];
    btn.backgroundColor = [UIColor redColor];
    btn.frame=CGRectMake(100,350,120,50);
    [btn setTitle:@"Back" forState:UIControlStateNormal];
    [self.view addSubview:btn];
    [btn addTarget:self action:@selector(dobutton) forControlEvents:UIControlEventTouchDown];
    
    UIButton *btn1 = [UIButton buttonWithType:UIButtonTypeCustom];
    btn1.backgroundColor = [UIColor redColor];
    btn1.frame=CGRectMake(100,500,120,50);
    [btn1 setTitle:@"next" forState:UIControlStateNormal];
    [self.view addSubview:btn1];
    [btn1 addTarget:self action:@selector(dobutton1) forControlEvents:UIControlEventTouchDown];
}
-(void)dobutton
{
    //SecViewController *sec = [[SecViewController alloc]init];
    //用导航控制器推下一个界面
    [self.navigationController popViewControllerAnimated: YES];
}
-(void)dobutton1
{
    ThdViewController *thd = [[ThdViewController alloc]init];
    [self.navigationController pushViewController:thd animated:YES];
}

- (void)didReceiveMemoryWarning {
    [super didReceiveMemoryWarning];
    // Dispose of any resources that can be recreated.
}

/*
#pragma mark - Navigation

// In a storyboard-based application, you will often want to do a little preparation before navigation
- (void)prepareForSegue:(UIStoryboardSegue *)segue sender:(id)sender {
    // Get the new view controller using [segue destinationViewController].
    // Pass the selected object to the new view controller.
}
*/

@end
//
//  ThdViewController.m
//  lesson_navgation
//
//  Created by lanouhn on 15-1-8.
//  Copyright (c) 2015年 lanouhn. All rights reserved.
//

#import "ThdViewController.h"

@interface ThdViewController ()

@end

@implementation ThdViewController

- (void)viewDidLoad {
    [super viewDidLoad];
    // Do any additional setup after loading the view.
    
    UIButton *btn = [UIButton buttonWithType:UIButtonTypeCustom];
    btn.backgroundColor = [UIColor redColor];
    btn.frame=CGRectMake(100,350,120,50);
    [btn setTitle:@"Back " forState:UIControlStateNormal];
    [self.view addSubview:btn];
    [btn addTarget:self action:@selector(dobutton) forControlEvents:UIControlEventTouchDown];
    
    
}
-(void)dobutton
{
    //[self.navigationController popToRootViewControllerAnimated:YES];
    //返回到指定的页面
    //获取当前导航控制器栈里面所有页面的方法
    NSArray *array=[self.navigationController viewControllers];
    //想返回到哪一页就从数组中取到哪一页的索引
    [self.navigationController popToViewController:[array objectAtIndex:0] animated:YES];
}
- (void)didReceiveMemoryWarning {
    [super didReceiveMemoryWarning];
    // Dispose of any resources that can be recreated.
}

/*
#pragma mark - Navigation

// In a storyboard-based application, you will often want to do a little preparation before navigation
- (void)prepareForSegue:(UIStoryboardSegue *)segue sender:(id)sender {
    // Get the new view controller using [segue destinationViewController].
    // Pass the selected object to the new view controller.
}
*/

@end


【无人机】基于改进粒子群算法的无人机路径规划研究[和遗传算法、粒子群算法进行比较](Matlab代码实现)内容概要:本文围绕基于改进粒子群算法的无人机路径规划展开研究,重点探讨了在复杂环境中利用改进粒子群算法(PSO)实现无人机三维路径规划的方法,并将其与遗传算法(GA)、标准粒子群算法等传统优化算法进行对比分析。研究内容涵盖路径规划的多目标优化、避障策略、航路点约束以及算法收敛性和寻优能力的评估,所有实验均通过Matlab代码实现,提供了完整的仿真验证流程。文章还提到了多种智能优化算法在无人机路径规划中的应用比较,突出了改进PSO在收敛速度和全局寻优方面的优势。; 适合人群:具备一定Matlab编程基础和优化算法知识的研究生、科研人员及从事无人机路径规划、智能优化算法研究的相关技术人员。; 使用场景及目标:①用于无人机在复杂地形或动态环境下的三维路径规划仿真研究;②比较不同智能优化算法(如PSO、GA、蚁群算法、RRT等)在路径规划中的性能差异;③为多目标优化问题提供算法选型和改进思路。; 阅读建议:建议读者结合文中提供的Matlab代码进行实践操作,重点关注算法的参数设置、适应度函数设计及路径约束处理方式,同时可参考文中提到的多种算法对比思路,拓展到其他智能优化算法的研究与改进中。
标题中的"EthernetIP-master.zip"压缩文档涉及工业自动化领域的以太网通信协议EtherNet/IP。该协议由罗克韦尔自动化公司基于TCP/IP技术架构开发,已广泛应用于ControlLogix系列控制设备。该压缩包内可能封装了协议实现代码、技术文档或测试工具等核心组件。 根据描述信息判断,该资源主要用于验证EtherNet/IP通信功能,可能包含测试用例、参数配置模板及故障诊断方案。标签系统通过多种拼写形式强化了协议主题标识,其中"swimo6q"字段需结合具体应用场景才能准确定义其技术含义。 从文件结构分析,该压缩包采用主分支命名规范,符合开源项目管理的基本特征。解压后预期可获取以下技术资料: 1. 项目说明文档:阐述开发目标、环境配置要求及授权条款 2. 核心算法源码:采用工业级编程语言实现的通信协议栈 3. 参数配置文件:预设网络地址、通信端口等连接参数 4. 自动化测试套件:包含协议一致性验证和性能基准测试 5. 技术参考手册:详细说明API接口规范与集成方法 6. 应用示范程序:展示设备数据交换的标准流程 7. 工程构建脚本:支持跨平台编译和部署流程 8. 法律声明文件:明确知识产权归属及使用限制 该测试平台可用于构建协议仿真环境,验证工业控制器与现场设备间的数据交互可靠性。在正式部署前开展此类测试,能够有效识别系统兼容性问题,提升工程实施质量。建议用户在解压文件后优先查阅许可协议,严格遵循技术文档的操作指引,同时需具备EtherNet/IP协议栈的基础知识以深入理解通信机制。 资源来源于网络分享,仅用于学习交流使用,请勿用于商业,如有侵权请联系我删除!
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
红包 添加红包
表情包 插入表情
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值