/**
****************************************************************************************************
* @file usart.c
* @author ÕýµãÔ×ÓÍŶÓ(ALIENTEK)
* @version V1.1
* @date 2023-06-05
* @brief ´®¿Ú³õʼ»¯´úÂë(Ò»°ãÊÇ´®¿Ú1)£¬Ö§³Öprintf
* @license Copyright (c) 2020-2032, ¹ãÖÝÊÐÐÇÒíµç×ӿƼ¼ÓÐÏÞ¹«Ë¾
****************************************************************************************************
* @attention
*
* ʵÑéƽ̨:ÕýµãÔ×Ó Ì½Ë÷Õß F407¿ª·¢°å
* ÔÚÏßÊÓƵ:www.yuanzige.com
* ¼¼ÊõÂÛ̳:www.openedv.com
* ¹«Ë¾ÍøÖ·:www.alientek.com
* ¹ºÂòµØÖ·:openedv.taobao.com
*
* ÐÞ¸Ä˵Ã÷
* V1.0 20211014
* µÚÒ»´Î·¢²¼
* V1.1 20230605
* ɾ³ýUSART_UX_IRQHandler()º¯ÊýµÄ³¬Ê±´¦ÀíºÍÐÞ¸ÄHAL_UART_RxCpltCallback()
****************************************************************************************************
*/
#include "./SYSTEM/sys/sys.h"
#include "./SYSTEM/usart/usart.h"
/* Èç¹ûʹÓÃos,Ôò°üÀ¨ÏÂÃæµÄÍ·Îļþ¼´¿É */
#if SYS_SUPPORT_OS
#include "os.h" /* os ʹÓà */
#endif
/******************************************************************************************/
/* ¼ÓÈëÒÔÏ´úÂë, Ö§³Öprintfº¯Êý, ¶ø²»ÐèҪѡÔñuse MicroLIB */
#if 1
#if (__ARMCC_VERSION >= 6010050) /* ʹÓÃAC6±àÒëÆ÷ʱ */
__asm(".global __use_no_semihosting\n\t"); /* ÉùÃ÷²»Ê¹ÓðëÖ÷»úģʽ */
__asm(".global __ARM_use_no_argv \n\t"); /* AC6ÏÂÐèÒªÉùÃ÷mainº¯ÊýΪÎÞ²ÎÊý¸ñʽ£¬·ñÔò²¿·ÖÀý³Ì¿ÉÄܳöÏÖ°ëÖ÷»úģʽ */
#else
/* ʹÓÃAC5±àÒëÆ÷ʱ, ÒªÔÚÕâÀﶨÒå__FILE ºÍ ²»Ê¹ÓðëÖ÷»úģʽ */
#pragma import(__use_no_semihosting)
struct __FILE
{
int handle;
/* Whatever you require here. If the only file you are using is */
/* standard output using printf() for debugging, no file handling */
/* is required. */
};
#endif
/* ²»Ê¹ÓðëÖ÷»úģʽ£¬ÖÁÉÙÐèÒªÖض¨Òå_ttywrch\_sys_exit\_sys_command_stringº¯Êý,ÒÔͬʱ¼æÈÝAC6ºÍAC5ģʽ */
int _ttywrch(int ch)
{
ch = ch;
return ch;
}
/* ¶¨Òå_sys_exit()ÒÔ±ÜÃâʹÓðëÖ÷»úģʽ */
void _sys_exit(int x)
{
x = x;
}
char *_sys_command_string(char *cmd, int len)
{
return NULL;
}
/* FILE ÔÚ stdio.hÀïÃ涨Òå. */
FILE __stdout;
/* Öض¨Òåfputcº¯Êý, printfº¯Êý×îÖÕ»áͨ¹ýµ÷ÓÃfputcÊä³ö×Ö·û´®µ½´®¿Ú */
int fputc(int ch, FILE *f)
{
while ((USART1->SR & 0X40) == 0); /* µÈ´ýÉÏÒ»¸ö×Ö·û·¢ËÍÍê³É */
USART1->DR = (uint8_t)ch; /* ½«Òª·¢Ë͵Ä×Ö·û ch дÈëµ½DR¼Ä´æÆ÷ */
return ch;
}
#endif
/***********************************************END*******************************************/
#if USART_EN_RX /* Èç¹ûʹÄÜÁ˽ÓÊÕ */
/* ½ÓÊÕ»º³å, ×î´óUSART_REC_LEN¸ö×Ö½Ú. */
uint8_t g_usart_rx_buf[USART_REC_LEN];
/* ½ÓÊÕ״̬
* bit15£¬ ½ÓÊÕÍê³É±êÖ¾
* bit14£¬ ½ÓÊÕµ½0x0d
* bit13~0£¬ ½ÓÊÕµ½µÄÓÐЧ×Ö½ÚÊýÄ¿
*/
uint16_t g_usart_rx_sta = 0;
uint8_t g_rx_buffer[RXBUFFERSIZE]; /* HAL¿âʹÓõĴ®¿Ú½ÓÊÕ»º³å */
UART_HandleTypeDef g_uart1_handle; /* UART¾ä±ú */
/**
* @brief ´®¿ÚX³õʼ»¯º¯Êý
* @param baudrate: ²¨ÌØÂÊ, ¸ù¾Ý×Ô¼ºÐèÒªÉèÖò¨ÌØÂÊÖµ
* @note ×¢Òâ: ±ØÐëÉèÖÃÕýÈ·µÄʱÖÓÔ´, ·ñÔò´®¿Ú²¨ÌØÂʾͻáÉèÖÃÒì³£.
* ÕâÀïµÄUSARTµÄʱÖÓÔ´ÔÚsys_stm32_clock_init()º¯ÊýÖÐÒѾÉèÖùýÁË.
* @retval ÎÞ
*/
void usart_init(uint32_t baudrate)
{
g_uart1_handle.Instance = USART_UX; /* USART1 */
g_uart1_handle.Init.BaudRate = baudrate; /* ²¨ÌØÂÊ */
g_uart1_handle.Init.WordLength = UART_WORDLENGTH_8B; /* ×Ö³¤Îª8λÊý¾Ý¸ñʽ */
g_uart1_handle.Init.StopBits = UART_STOPBITS_1; /* Ò»¸öֹͣλ */
g_uart1_handle.Init.Parity = UART_PARITY_NONE; /* ÎÞÆæżУÑéλ */
g_uart1_handle.Init.HwFlowCtl = UART_HWCONTROL_NONE; /* ÎÞÓ²¼þÁ÷¿Ø */
g_uart1_handle.Init.Mode = UART_MODE_TX_RX; /* ÊÕ·¢Ä£Ê½ */
HAL_UART_Init(&g_uart1_handle); /* HAL_UART_Init()»áʹÄÜUART1 */
/* ¸Ãº¯Êý»á¿ªÆô½ÓÊÕÖжϣº±ê־λUART_IT_RXNE£¬²¢ÇÒÉèÖýÓÊÕ»º³åÒÔ¼°½ÓÊÕ»º³å½ÓÊÕ×î´óÊý¾ÝÁ¿ */
HAL_UART_Receive_IT(&g_uart1_handle, (uint8_t *)g_rx_buffer, RXBUFFERSIZE);
}
/**
* @brief UARTµ×²ã³õʼ»¯º¯Êý
* @param huart: UART¾ä±úÀàÐÍÖ¸Õë
* @note ´Ëº¯Êý»á±»HAL_UART_Init()µ÷ÓÃ
* Íê³ÉʱÖÓʹÄÜ£¬Òý½ÅÅäÖã¬ÖжÏÅäÖÃ
* @retval ÎÞ
*/
void HAL_UART_MspInit(UART_HandleTypeDef *huart)
{
GPIO_InitTypeDef gpio_init_struct;
if(huart->Instance == USART_UX) /* Èç¹ûÊÇ´®¿Ú1£¬½øÐд®¿Ú1 MSP³õʼ»¯ */
{
USART_UX_CLK_ENABLE(); /* USART1 ʱÖÓʹÄÜ */
USART_TX_GPIO_CLK_ENABLE(); /* ·¢ËÍÒý½ÅʱÖÓʹÄÜ */
USART_RX_GPIO_CLK_ENABLE(); /* ½ÓÊÕÒý½ÅʱÖÓʹÄÜ */
gpio_init_struct.Pin = USART_TX_GPIO_PIN; /* TXÒý½Å */
gpio_init_struct.Mode = GPIO_MODE_AF_PP; /* ¸´ÓÃÍÆÍìÊä³ö */
gpio_init_struct.Pull = GPIO_PULLUP; /* ÉÏÀ */
gpio_init_struct.Speed = GPIO_SPEED_FREQ_HIGH; /* ¸ßËÙ */
gpio_init_struct.Alternate = USART_TX_GPIO_AF; /* ¸´ÓÃΪUSART1 */
HAL_GPIO_Init(USART_TX_GPIO_PORT, &gpio_init_struct); /* ³õʼ»¯·¢ËÍÒý½Å */
gpio_init_struct.Pin = USART_RX_GPIO_PIN; /* RXÒý½Å */
gpio_init_struct.Alternate = USART_RX_GPIO_AF; /* ¸´ÓÃΪUSART1 */
HAL_GPIO_Init(USART_RX_GPIO_PORT, &gpio_init_struct); /* ³õʼ»¯½ÓÊÕÒý½Å */
#if USART_EN_RX
HAL_NVIC_EnableIRQ(USART_UX_IRQn); /* ʹÄÜUSART1ÖжÏͨµÀ */
HAL_NVIC_SetPriority(USART_UX_IRQn, 3, 3); /* ÇÀÕ¼ÓÅÏȼ¶3£¬×ÓÓÅÏȼ¶3 */
#endif
}
}
/**
* @brief Rx´«Êä»Øµ÷º¯Êý
* @param huart: UART¾ä±úÀàÐÍÖ¸Õë
* @retval ÎÞ
*/
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
{
if(huart->Instance == USART_UX) /* Èç¹ûÊÇ´®¿Ú1 */
{
if((g_usart_rx_sta & 0x8000) == 0) /* ½ÓÊÕδÍê³É */
{
if(g_usart_rx_sta & 0x4000) /* ½ÓÊÕµ½ÁË0x0d */
{
if(g_rx_buffer[0] != 0x0a)
{
g_usart_rx_sta = 0; /* ½ÓÊÕ´íÎó,ÖØпªÊ¼ */
}
else
{
g_usart_rx_sta |= 0x8000; /* ½ÓÊÕÍê³ÉÁË */
}
}
else /* »¹Ã»ÊÕµ½0X0D */
{
if(g_rx_buffer[0] == 0x0d)
{
g_usart_rx_sta |= 0x4000;
}
else
{
g_usart_rx_buf[g_usart_rx_sta & 0X3FFF] = g_rx_buffer[0] ;
g_usart_rx_sta++;
if(g_usart_rx_sta > (USART_REC_LEN - 1))
{
g_usart_rx_sta = 0; /* ½ÓÊÕÊý¾Ý´íÎó,ÖØпªÊ¼½ÓÊÕ */
}
}
}
}
HAL_UART_Receive_IT(&g_uart1_handle, (uint8_t *)g_rx_buffer, RXBUFFERSIZE);
}
}
/**
* @brief ´®¿Ú1ÖжϷþÎñº¯Êý
* @param ÎÞ
* @retval ÎÞ
*/
void USART_UX_IRQHandler(void)
{
#if SYS_SUPPORT_OS /* ʹÓÃOS */
OSIntEnter();
#endif
HAL_UART_IRQHandler(&g_uart1_handle); /* µ÷ÓÃHAL¿âÖжϴ¦Àí¹«Óú¯Êý */
#if SYS_SUPPORT_OS /* ʹÓÃOS */
OSIntExit();
#endif
}
#endif
/**
****************************************************************************************************
* @file usart.c
* @author ÕýµãÔ×ÓÍŶÓ(ALIENTEK)
* @version V1.1
* @date 2023-06-05
* @brief ´®¿Ú³õʼ»¯´úÂë(Ò»°ãÊÇ´®¿Ú1)£¬Ö§³Öprintf
* @license Copyright (c) 2020-2032, ¹ãÖÝÊÐÐÇÒíµç×ӿƼ¼ÓÐÏÞ¹«Ë¾
****************************************************************************************************
* @attention
*
* ʵÑéƽ̨:ÕýµãÔ×Ó Ì½Ë÷Õß F407¿ª·¢°å
* ÔÚÏßÊÓƵ:www.yuanzige.com
* ¼¼ÊõÂÛ̳:www.openedv.com
* ¹«Ë¾ÍøÖ·:www.alientek.com
* ¹ºÂòµØÖ·:openedv.taobao.com
*
* ÐÞ¸Ä˵Ã÷
* V1.0 20211014
* µÚÒ»´Î·¢²¼
* V1.1 20230605
* ɾ³ýUSART_UX_IRQHandler()º¯ÊýµÄ³¬Ê±´¦ÀíºÍÐÞ¸ÄHAL_UART_RxCpltCallback()
****************************************************************************************************
*/
#include "./SYSTEM/sys/sys.h"
#include "./SYSTEM/usart/usart.h"
/* Èç¹ûʹÓÃos,Ôò°üÀ¨ÏÂÃæµÄÍ·Îļþ¼´¿É */
#if SYS_SUPPORT_OS
#include "os.h" /* os ʹÓà */
#endif
/******************************************************************************************/
/* ¼ÓÈëÒÔÏ´úÂë, Ö§³Öprintfº¯Êý, ¶ø²»ÐèҪѡÔñuse MicroLIB */
#if 1
#if (__ARMCC_VERSION >= 6010050) /* ʹÓÃAC6±àÒëÆ÷ʱ */
__asm(".global __use_no_semihosting\n\t"); /* ÉùÃ÷²»Ê¹ÓðëÖ÷»úģʽ */
__asm(".global __ARM_use_no_argv \n\t"); /* AC6ÏÂÐèÒªÉùÃ÷mainº¯ÊýΪÎÞ²ÎÊý¸ñʽ£¬·ñÔò²¿·ÖÀý³Ì¿ÉÄܳöÏÖ°ëÖ÷»úģʽ */
#else
/* ʹÓÃAC5±àÒëÆ÷ʱ, ÒªÔÚÕâÀﶨÒå__FILE ºÍ ²»Ê¹ÓðëÖ÷»úģʽ */
#pragma import(__use_no_semihosting)
struct __FILE
{
int handle;
/* Whatever you require here. If the only file you are using is */
/* standard output using printf() for debugging, no file handling */
/* is required. */
};
#endif
/* ²»Ê¹ÓðëÖ÷»úģʽ£¬ÖÁÉÙÐèÒªÖض¨Òå_ttywrch\_sys_exit\_sys_command_stringº¯Êý,ÒÔͬʱ¼æÈÝAC6ºÍAC5ģʽ */
int _ttywrch(int ch)
{
ch = ch;
return ch;
}
/* ¶¨Òå_sys_exit()ÒÔ±ÜÃâʹÓðëÖ÷»úģʽ */
void _sys_exit(int x)
{
x = x;
}
char *_sys_command_string(char *cmd, int len)
{
return NULL;
}
/* FILE ÔÚ stdio.hÀïÃ涨Òå. */
FILE __stdout;
/* Öض¨Òåfputcº¯Êý, printfº¯Êý×îÖÕ»áͨ¹ýµ÷ÓÃfputcÊä³ö×Ö·û´®µ½´®¿Ú */
int fputc(int ch, FILE *f)
{
while ((USART1->SR & 0X40) == 0); /* µÈ´ýÉÏÒ»¸ö×Ö·û·¢ËÍÍê³É */
USART1->DR = (uint8_t)ch; /* ½«Òª·¢Ë͵Ä×Ö·û ch дÈëµ½DR¼Ä´æÆ÷ */
return ch;
}
#endif
/***********************************************END*******************************************/
#if USART_EN_RX /* Èç¹ûʹÄÜÁ˽ÓÊÕ */
/* ½ÓÊÕ»º³å, ×î´óUSART_REC_LEN¸ö×Ö½Ú. */
uint8_t g_usart_rx_buf[USART_REC_LEN];
/* ½ÓÊÕ״̬
* bit15£¬ ½ÓÊÕÍê³É±êÖ¾
* bit14£¬ ½ÓÊÕµ½0x0d
* bit13~0£¬ ½ÓÊÕµ½µÄÓÐЧ×Ö½ÚÊýÄ¿
*/
uint16_t g_usart_rx_sta = 0;
uint8_t g_rx_buffer[RXBUFFERSIZE]; /* HAL¿âʹÓõĴ®¿Ú½ÓÊÕ»º³å */
UART_HandleTypeDef g_uart1_handle; /* UART¾ä±ú */
/**
* @brief ´®¿ÚX³õʼ»¯º¯Êý
* @param baudrate: ²¨ÌØÂÊ, ¸ù¾Ý×Ô¼ºÐèÒªÉèÖò¨ÌØÂÊÖµ
* @note ×¢Òâ: ±ØÐëÉèÖÃÕýÈ·µÄʱÖÓÔ´, ·ñÔò´®¿Ú²¨ÌØÂʾͻáÉèÖÃÒì³£.
* ÕâÀïµÄUSARTµÄʱÖÓÔ´ÔÚsys_stm32_clock_init()º¯ÊýÖÐÒѾÉèÖùýÁË.
* @retval ÎÞ
*/
void usart_init(uint32_t baudrate)
{
g_uart1_handle.Instance = USART_UX; /* USART1 */
g_uart1_handle.Init.BaudRate = baudrate; /* ²¨ÌØÂÊ */
g_uart1_handle.Init.WordLength = UART_WORDLENGTH_8B; /* ×Ö³¤Îª8λÊý¾Ý¸ñʽ */
g_uart1_handle.Init.StopBits = UART_STOPBITS_1; /* Ò»¸öֹͣλ */
g_uart1_handle.Init.Parity = UART_PARITY_NONE; /* ÎÞÆæżУÑéλ */
g_uart1_handle.Init.HwFlowCtl = UART_HWCONTROL_NONE; /* ÎÞÓ²¼þÁ÷¿Ø */
g_uart1_handle.Init.Mode = UART_MODE_TX_RX; /* ÊÕ·¢Ä£Ê½ */
HAL_UART_Init(&g_uart1_handle); /* HAL_UART_Init()»áʹÄÜUART1 */
/* ¸Ãº¯Êý»á¿ªÆô½ÓÊÕÖжϣº±ê־λUART_IT_RXNE£¬²¢ÇÒÉèÖýÓÊÕ»º³åÒÔ¼°½ÓÊÕ»º³å½ÓÊÕ×î´óÊý¾ÝÁ¿ */
HAL_UART_Receive_IT(&g_uart1_handle, (uint8_t *)g_rx_buffer, RXBUFFERSIZE);
}
/**
* @brief UARTµ×²ã³õʼ»¯º¯Êý
* @param huart: UART¾ä±úÀàÐÍÖ¸Õë
* @note ´Ëº¯Êý»á±»HAL_UART_Init()µ÷ÓÃ
* Íê³ÉʱÖÓʹÄÜ£¬Òý½ÅÅäÖã¬ÖжÏÅäÖÃ
* @retval ÎÞ
*/
void HAL_UART_MspInit(UART_HandleTypeDef *huart)
{
GPIO_InitTypeDef gpio_init_struct;
if(huart->Instance == USART_UX) /* Èç¹ûÊÇ´®¿Ú1£¬½øÐд®¿Ú1 MSP³õʼ»¯ */
{
USART_UX_CLK_ENABLE(); /* USART1 ʱÖÓʹÄÜ */
USART_TX_GPIO_CLK_ENABLE(); /* ·¢ËÍÒý½ÅʱÖÓʹÄÜ */
USART_RX_GPIO_CLK_ENABLE(); /* ½ÓÊÕÒý½ÅʱÖÓʹÄÜ */
gpio_init_struct.Pin = USART_TX_GPIO_PIN; /* TXÒý½Å */
gpio_init_struct.Mode = GPIO_MODE_AF_PP; /* ¸´ÓÃÍÆÍìÊä³ö */
gpio_init_struct.Pull = GPIO_PULLUP; /* ÉÏÀ */
gpio_init_struct.Speed = GPIO_SPEED_FREQ_HIGH; /* ¸ßËÙ */
gpio_init_struct.Alternate = USART_TX_GPIO_AF; /* ¸´ÓÃΪUSART1 */
HAL_GPIO_Init(USART_TX_GPIO_PORT, &gpio_init_struct); /* ³õʼ»¯·¢ËÍÒý½Å */
gpio_init_struct.Pin = USART_RX_GPIO_PIN; /* RXÒý½Å */
gpio_init_struct.Alternate = USART_RX_GPIO_AF; /* ¸´ÓÃΪUSART1 */
HAL_GPIO_Init(USART_RX_GPIO_PORT, &gpio_init_struct); /* ³õʼ»¯½ÓÊÕÒý½Å */
#if USART_EN_RX
HAL_NVIC_EnableIRQ(USART_UX_IRQn); /* ʹÄÜUSART1ÖжÏͨµÀ */
HAL_NVIC_SetPriority(USART_UX_IRQn, 3, 3); /* ÇÀÕ¼ÓÅÏȼ¶3£¬×ÓÓÅÏȼ¶3 */
#endif
}
}
/**
* @brief Rx´«Êä»Øµ÷º¯Êý
* @param huart: UART¾ä±úÀàÐÍÖ¸Õë
* @retval ÎÞ
*/
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
{
if(huart->Instance == USART_UX) /* Èç¹ûÊÇ´®¿Ú1 */
{
if((g_usart_rx_sta & 0x8000) == 0) /* ½ÓÊÕδÍê³É */
{
if(g_usart_rx_sta & 0x4000) /* ½ÓÊÕµ½ÁË0x0d */
{
if(g_rx_buffer[0] != 0x0a)
{
g_usart_rx_sta = 0; /* ½ÓÊÕ´íÎó,ÖØпªÊ¼ */
}
else
{
g_usart_rx_sta |= 0x8000; /* ½ÓÊÕÍê³ÉÁË */
}
}
else /* »¹Ã»ÊÕµ½0X0D */
{
if(g_rx_buffer[0] == 0x0d)
{
g_usart_rx_sta |= 0x4000;
}
else
{
g_usart_rx_buf[g_usart_rx_sta & 0X3FFF] = g_rx_buffer[0] ;
g_usart_rx_sta++;
if(g_usart_rx_sta > (USART_REC_LEN - 1))
{
g_usart_rx_sta = 0; /* ½ÓÊÕÊý¾Ý´íÎó,ÖØпªÊ¼½ÓÊÕ */
}
}
}
}
HAL_UART_Receive_IT(&g_uart1_handle, (uint8_t *)g_rx_buffer, RXBUFFERSIZE);
}
}
/**
* @brief ´®¿Ú1ÖжϷþÎñº¯Êý
* @param ÎÞ
* @retval ÎÞ
*/
void USART_UX_IRQHandler(void)
{
#if SYS_SUPPORT_OS /* ʹÓÃOS */
OSIntEnter();
#endif
HAL_UART_IRQHandler(&g_uart1_handle); /* µ÷ÓÃHAL¿âÖжϴ¦Àí¹«Óú¯Êý */
#if SYS_SUPPORT_OS /* ʹÓÃOS */
OSIntExit();
#endif
}
#endif
/**
****************************************************************************************************
* @file usart.c
* @author ÕýµãÔ×ÓÍŶÓ(ALIENTEK)
* @version V1.1
* @date 2023-06-05
* @brief ´®¿Ú³õʼ»¯´úÂë(Ò»°ãÊÇ´®¿Ú1)£¬Ö§³Öprintf
* @license Copyright (c) 2020-2032, ¹ãÖÝÊÐÐÇÒíµç×ӿƼ¼ÓÐÏÞ¹«Ë¾
****************************************************************************************************
* @attention
*
* ʵÑéƽ̨:ÕýµãÔ×Ó Ì½Ë÷Õß F407¿ª·¢°å
* ÔÚÏßÊÓƵ:www.yuanzige.com
* ¼¼ÊõÂÛ̳:www.openedv.com
* ¹«Ë¾ÍøÖ·:www.alientek.com
* ¹ºÂòµØÖ·:openedv.taobao.com
*
* ÐÞ¸Ä˵Ã÷
* V1.0 20211014
* µÚÒ»´Î·¢²¼
* V1.1 20230605
* ɾ³ýUSART_UX_IRQHandler()º¯ÊýµÄ³¬Ê±´¦ÀíºÍÐÞ¸ÄHAL_UART_RxCpltCallback()
****************************************************************************************************
*/
#include "./SYSTEM/sys/sys.h"
#include "./SYSTEM/usart/usart.h"
/* Èç¹ûʹÓÃos,Ôò°üÀ¨ÏÂÃæµÄÍ·Îļþ¼´¿É */
#if SYS_SUPPORT_OS
#include "os.h" /* os ʹÓà */
#endif
/******************************************************************************************/
/* ¼ÓÈëÒÔÏ´úÂë, Ö§³Öprintfº¯Êý, ¶ø²»ÐèҪѡÔñuse MicroLIB */
#if 1
#if (__ARMCC_VERSION >= 6010050) /* ʹÓÃAC6±àÒëÆ÷ʱ */
__asm(".global __use_no_semihosting\n\t"); /* ÉùÃ÷²»Ê¹ÓðëÖ÷»úģʽ */
__asm(".global __ARM_use_no_argv \n\t"); /* AC6ÏÂÐèÒªÉùÃ÷mainº¯ÊýΪÎÞ²ÎÊý¸ñʽ£¬·ñÔò²¿·ÖÀý³Ì¿ÉÄܳöÏÖ°ëÖ÷»úģʽ */
#else
/* ʹÓÃAC5±àÒëÆ÷ʱ, ÒªÔÚÕâÀﶨÒå__FILE ºÍ ²»Ê¹ÓðëÖ÷»úģʽ */
#pragma import(__use_no_semihosting)
struct __FILE
{
int handle;
/* Whatever you require here. If the only file you are using is */
/* standard output using printf() for debugging, no file handling */
/* is required. */
};
#endif
/* ²»Ê¹ÓðëÖ÷»úģʽ£¬ÖÁÉÙÐèÒªÖض¨Òå_ttywrch\_sys_exit\_sys_command_stringº¯Êý,ÒÔͬʱ¼æÈÝAC6ºÍAC5ģʽ */
int _ttywrch(int ch)
{
ch = ch;
return ch;
}
/* ¶¨Òå_sys_exit()ÒÔ±ÜÃâʹÓðëÖ÷»úģʽ */
void _sys_exit(int x)
{
x = x;
}
char *_sys_command_string(char *cmd, int len)
{
return NULL;
}
/* FILE ÔÚ stdio.hÀïÃ涨Òå. */
FILE __stdout;
/* Öض¨Òåfputcº¯Êý, printfº¯Êý×îÖÕ»áͨ¹ýµ÷ÓÃfputcÊä³ö×Ö·û´®µ½´®¿Ú */
int fputc(int ch, FILE *f)
{
while ((USART1->SR & 0X40) == 0); /* µÈ´ýÉÏÒ»¸ö×Ö·û·¢ËÍÍê³É */
USART1->DR = (uint8_t)ch; /* ½«Òª·¢Ë͵Ä×Ö·û ch дÈëµ½DR¼Ä´æÆ÷ */
return ch;
}
#endif
/***********************************************END*******************************************/
#if USART_EN_RX /* Èç¹ûʹÄÜÁ˽ÓÊÕ */
/* ½ÓÊÕ»º³å, ×î´óUSART_REC_LEN¸ö×Ö½Ú. */
uint8_t g_usart_rx_buf[USART_REC_LEN];
/* ½ÓÊÕ״̬
* bit15£¬ ½ÓÊÕÍê³É±êÖ¾
* bit14£¬ ½ÓÊÕµ½0x0d
* bit13~0£¬ ½ÓÊÕµ½µÄÓÐЧ×Ö½ÚÊýÄ¿
*/
uint16_t g_usart_rx_sta = 0;
uint8_t g_rx_buffer[RXBUFFERSIZE]; /* HAL¿âʹÓõĴ®¿Ú½ÓÊÕ»º³å */
UART_HandleTypeDef g_uart1_handle; /* UART¾ä±ú */
/**
* @brief ´®¿ÚX³õʼ»¯º¯Êý
* @param baudrate: ²¨ÌØÂÊ, ¸ù¾Ý×Ô¼ºÐèÒªÉèÖò¨ÌØÂÊÖµ
* @note ×¢Òâ: ±ØÐëÉèÖÃÕýÈ·µÄʱÖÓÔ´, ·ñÔò´®¿Ú²¨ÌØÂʾͻáÉèÖÃÒì³£.
* ÕâÀïµÄUSARTµÄʱÖÓÔ´ÔÚsys_stm32_clock_init()º¯ÊýÖÐÒѾÉèÖùýÁË.
* @retval ÎÞ
*/
void usart_init(uint32_t baudrate)
{
g_uart1_handle.Instance = USART_UX; /* USART1 */
g_uart1_handle.Init.BaudRate = baudrate; /* ²¨ÌØÂÊ */
g_uart1_handle.Init.WordLength = UART_WORDLENGTH_8B; /* ×Ö³¤Îª8λÊý¾Ý¸ñʽ */
g_uart1_handle.Init.StopBits = UART_STOPBITS_1; /* Ò»¸öֹͣλ */
g_uart1_handle.Init.Parity = UART_PARITY_NONE; /* ÎÞÆæżУÑéλ */
g_uart1_handle.Init.HwFlowCtl = UART_HWCONTROL_NONE; /* ÎÞÓ²¼þÁ÷¿Ø */
g_uart1_handle.Init.Mode = UART_MODE_TX_RX; /* ÊÕ·¢Ä£Ê½ */
HAL_UART_Init(&g_uart1_handle); /* HAL_UART_Init()»áʹÄÜUART1 */
/* ¸Ãº¯Êý»á¿ªÆô½ÓÊÕÖжϣº±ê־λUART_IT_RXNE£¬²¢ÇÒÉèÖýÓÊÕ»º³åÒÔ¼°½ÓÊÕ»º³å½ÓÊÕ×î´óÊý¾ÝÁ¿ */
HAL_UART_Receive_IT(&g_uart1_handle, (uint8_t *)g_rx_buffer, RXBUFFERSIZE);
}
/**
* @brief UARTµ×²ã³õʼ»¯º¯Êý
* @param huart: UART¾ä±úÀàÐÍÖ¸Õë
* @note ´Ëº¯Êý»á±»HAL_UART_Init()µ÷ÓÃ
* Íê³ÉʱÖÓʹÄÜ£¬Òý½ÅÅäÖã¬ÖжÏÅäÖÃ
* @retval ÎÞ
*/
void HAL_UART_MspInit(UART_HandleTypeDef *huart)
{
GPIO_InitTypeDef gpio_init_struct;
if(huart->Instance == USART_UX) /* Èç¹ûÊÇ´®¿Ú1£¬½øÐд®¿Ú1 MSP³õʼ»¯ */
{
USART_UX_CLK_ENABLE(); /* USART1 ʱÖÓʹÄÜ */
USART_TX_GPIO_CLK_ENABLE(); /* ·¢ËÍÒý½ÅʱÖÓʹÄÜ */
USART_RX_GPIO_CLK_ENABLE(); /* ½ÓÊÕÒý½ÅʱÖÓʹÄÜ */
gpio_init_struct.Pin = USART_TX_GPIO_PIN; /* TXÒý½Å */
gpio_init_struct.Mode = GPIO_MODE_AF_PP; /* ¸´ÓÃÍÆÍìÊä³ö */
gpio_init_struct.Pull = GPIO_PULLUP; /* ÉÏÀ */
gpio_init_struct.Speed = GPIO_SPEED_FREQ_HIGH; /* ¸ßËÙ */
gpio_init_struct.Alternate = USART_TX_GPIO_AF; /* ¸´ÓÃΪUSART1 */
HAL_GPIO_Init(USART_TX_GPIO_PORT, &gpio_init_struct); /* ³õʼ»¯·¢ËÍÒý½Å */
gpio_init_struct.Pin = USART_RX_GPIO_PIN; /* RXÒý½Å */
gpio_init_struct.Alternate = USART_RX_GPIO_AF; /* ¸´ÓÃΪUSART1 */
HAL_GPIO_Init(USART_RX_GPIO_PORT, &gpio_init_struct); /* ³õʼ»¯½ÓÊÕÒý½Å */
#if USART_EN_RX
HAL_NVIC_EnableIRQ(USART_UX_IRQn); /* ʹÄÜUSART1ÖжÏͨµÀ */
HAL_NVIC_SetPriority(USART_UX_IRQn, 3, 3); /* ÇÀÕ¼ÓÅÏȼ¶3£¬×ÓÓÅÏȼ¶3 */
#endif
}
}
/**
* @brief Rx´«Êä»Øµ÷º¯Êý
* @param huart: UART¾ä±úÀàÐÍÖ¸Õë
* @retval ÎÞ
*/
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
{
if(huart->Instance == USART_UX) /* Èç¹ûÊÇ´®¿Ú1 */
{
if((g_usart_rx_sta & 0x8000) == 0) /* ½ÓÊÕδÍê³É */
{
if(g_usart_rx_sta & 0x4000) /* ½ÓÊÕµ½ÁË0x0d */
{
if(g_rx_buffer[0] != 0x0a)
{
g_usart_rx_sta = 0; /* ½ÓÊÕ´íÎó,ÖØпªÊ¼ */
}
else
{
g_usart_rx_sta |= 0x8000; /* ½ÓÊÕÍê³ÉÁË */
}
}
else /* »¹Ã»ÊÕµ½0X0D */
{
if(g_rx_buffer[0] == 0x0d)
{
g_usart_rx_sta |= 0x4000;
}
else
{
g_usart_rx_buf[g_usart_rx_sta & 0X3FFF] = g_rx_buffer[0] ;
g_usart_rx_sta++;
if(g_usart_rx_sta > (USART_REC_LEN - 1))
{
g_usart_rx_sta = 0; /* ½ÓÊÕÊý¾Ý´íÎó,ÖØпªÊ¼½ÓÊÕ */
}
}
}
}
HAL_UART_Receive_IT(&g_uart1_handle, (uint8_t *)g_rx_buffer, RXBUFFERSIZE);
}
}
/**
* @brief ´®¿Ú1ÖжϷþÎñº¯Êý
* @param ÎÞ
* @retval ÎÞ
*/
void USART_UX_IRQHandler(void)
{
#if SYS_SUPPORT_OS /* ʹÓÃOS */
OSIntEnter();
#endif
HAL_UART_IRQHandler(&g_uart1_handle); /* µ÷ÓÃHAL¿âÖжϴ¦Àí¹«Óú¯Êý */
#if SYS_SUPPORT_OS /* ʹÓÃOS */
OSIntExit();
#endif
}
#endif
/**
****************************************************************************************************
* @file usart.c
* @author ÕýµãÔ×ÓÍŶÓ(ALIENTEK)
* @version V1.1
* @date 2023-06-05
* @brief ´®¿Ú³õʼ»¯´úÂë(Ò»°ãÊÇ´®¿Ú1)£¬Ö§³Öprintf
* @license Copyright (c) 2020-2032, ¹ãÖÝÊÐÐÇÒíµç×ӿƼ¼ÓÐÏÞ¹«Ë¾
****************************************************************************************************
* @attention
*
* ʵÑéƽ̨:ÕýµãÔ×Ó Ì½Ë÷Õß F407¿ª·¢°å
* ÔÚÏßÊÓƵ:www.yuanzige.com
* ¼¼ÊõÂÛ̳:www.openedv.com
* ¹«Ë¾ÍøÖ·:www.alientek.com
* ¹ºÂòµØÖ·:openedv.taobao.com
*
* ÐÞ¸Ä˵Ã÷
* V1.0 20211014
* µÚÒ»´Î·¢²¼
* V1.1 20230605
* ɾ³ýUSART_UX_IRQHandler()º¯ÊýµÄ³¬Ê±´¦ÀíºÍÐÞ¸ÄHAL_UART_RxCpltCallback()
****************************************************************************************************
*/
#include "./SYSTEM/sys/sys.h"
#include "./SYSTEM/usart/usart.h"
/* Èç¹ûʹÓÃos,Ôò°üÀ¨ÏÂÃæµÄÍ·Îļþ¼´¿É */
#if SYS_SUPPORT_OS
#include "os.h" /* os ʹÓà */
#endif
/******************************************************************************************/
/* ¼ÓÈëÒÔÏ´úÂë, Ö§³Öprintfº¯Êý, ¶ø²»ÐèҪѡÔñuse MicroLIB */
#if 1
#if (__ARMCC_VERSION >= 6010050) /* ʹÓÃAC6±àÒëÆ÷ʱ */
__asm(".global __use_no_semihosting\n\t"); /* ÉùÃ÷²»Ê¹ÓðëÖ÷»úģʽ */
__asm(".global __ARM_use_no_argv \n\t"); /* AC6ÏÂÐèÒªÉùÃ÷mainº¯ÊýΪÎÞ²ÎÊý¸ñʽ£¬·ñÔò²¿·ÖÀý³Ì¿ÉÄܳöÏÖ°ëÖ÷»úģʽ */
#else
/* ʹÓÃAC5±àÒëÆ÷ʱ, ÒªÔÚÕâÀﶨÒå__FILE ºÍ ²»Ê¹ÓðëÖ÷»úģʽ */
#pragma import(__use_no_semihosting)
struct __FILE
{
int handle;
/* Whatever you require here. If the only file you are using is */
/* standard output using printf() for debugging, no file handling */
/* is required. */
};
#endif
/* ²»Ê¹ÓðëÖ÷»úģʽ£¬ÖÁÉÙÐèÒªÖض¨Òå_ttywrch\_sys_exit\_sys_command_stringº¯Êý,ÒÔͬʱ¼æÈÝAC6ºÍAC5ģʽ */
int _ttywrch(int ch)
{
ch = ch;
return ch;
}
/* ¶¨Òå_sys_exit()ÒÔ±ÜÃâʹÓðëÖ÷»úģʽ */
void _sys_exit(int x)
{
x = x;
}
char *_sys_command_string(char *cmd, int len)
{
return NULL;
}
/* FILE ÔÚ stdio.hÀïÃ涨Òå. */
FILE __stdout;
/* Öض¨Òåfputcº¯Êý, printfº¯Êý×îÖÕ»áͨ¹ýµ÷ÓÃfputcÊä³ö×Ö·û´®µ½´®¿Ú */
int fputc(int ch, FILE *f)
{
while ((USART1->SR & 0X40) == 0); /* µÈ´ýÉÏÒ»¸ö×Ö·û·¢ËÍÍê³É */
USART1->DR = (uint8_t)ch; /* ½«Òª·¢Ë͵Ä×Ö·û ch дÈëµ½DR¼Ä´æÆ÷ */
return ch;
}
#endif
/***********************************************END*******************************************/
#if USART_EN_RX /* Èç¹ûʹÄÜÁ˽ÓÊÕ */
/* ½ÓÊÕ»º³å, ×î´óUSART_REC_LEN¸ö×Ö½Ú. */
uint8_t g_usart_rx_buf[USART_REC_LEN];
/* ½ÓÊÕ״̬
* bit15£¬ ½ÓÊÕÍê³É±êÖ¾
* bit14£¬ ½ÓÊÕµ½0x0d
* bit13~0£¬ ½ÓÊÕµ½µÄÓÐЧ×Ö½ÚÊýÄ¿
*/
uint16_t g_usart_rx_sta = 0;
uint8_t g_rx_buffer[RXBUFFERSIZE]; /* HAL¿âʹÓõĴ®¿Ú½ÓÊÕ»º³å */
UART_HandleTypeDef g_uart1_handle; /* UART¾ä±ú */
/**
* @brief ´®¿ÚX³õʼ»¯º¯Êý
* @param baudrate: ²¨ÌØÂÊ, ¸ù¾Ý×Ô¼ºÐèÒªÉèÖò¨ÌØÂÊÖµ
* @note ×¢Òâ: ±ØÐëÉèÖÃÕýÈ·µÄʱÖÓÔ´, ·ñÔò´®¿Ú²¨ÌØÂʾͻáÉèÖÃÒì³£.
* ÕâÀïµÄUSARTµÄʱÖÓÔ´ÔÚsys_stm32_clock_init()º¯ÊýÖÐÒѾÉèÖùýÁË.
* @retval ÎÞ
*/
void usart_init(uint32_t baudrate)
{
g_uart1_handle.Instance = USART_UX; /* USART1 */
g_uart1_handle.Init.BaudRate = baudrate; /* ²¨ÌØÂÊ */
g_uart1_handle.Init.WordLength = UART_WORDLENGTH_8B; /* ×Ö³¤Îª8λÊý¾Ý¸ñʽ */
g_uart1_handle.Init.StopBits = UART_STOPBITS_1; /* Ò»¸öֹͣλ */
g_uart1_handle.Init.Parity = UART_PARITY_NONE; /* ÎÞÆæżУÑéλ */
g_uart1_handle.Init.HwFlowCtl = UART_HWCONTROL_NONE; /* ÎÞÓ²¼þÁ÷¿Ø */
g_uart1_handle.Init.Mode = UART_MODE_TX_RX; /* ÊÕ·¢Ä£Ê½ */
HAL_UART_Init(&g_uart1_handle); /* HAL_UART_Init()»áʹÄÜUART1 */
/* ¸Ãº¯Êý»á¿ªÆô½ÓÊÕÖжϣº±ê־λUART_IT_RXNE£¬²¢ÇÒÉèÖýÓÊÕ»º³åÒÔ¼°½ÓÊÕ»º³å½ÓÊÕ×î´óÊý¾ÝÁ¿ */
HAL_UART_Receive_IT(&g_uart1_handle, (uint8_t *)g_rx_buffer, RXBUFFERSIZE);
}
/**
* @brief UARTµ×²ã³õʼ»¯º¯Êý
* @param huart: UART¾ä±úÀàÐÍÖ¸Õë
* @note ´Ëº¯Êý»á±»HAL_UART_Init()µ÷ÓÃ
* Íê³ÉʱÖÓʹÄÜ£¬Òý½ÅÅäÖã¬ÖжÏÅäÖÃ
* @retval ÎÞ
*/
void HAL_UART_MspInit(UART_HandleTypeDef *huart)
{
GPIO_InitTypeDef gpio_init_struct;
if(huart->Instance == USART_UX) /* Èç¹ûÊÇ´®¿Ú1£¬½øÐд®¿Ú1 MSP³õʼ»¯ */
{
USART_UX_CLK_ENABLE(); /* USART1 ʱÖÓʹÄÜ */
USART_TX_GPIO_CLK_ENABLE(); /* ·¢ËÍÒý½ÅʱÖÓʹÄÜ */
USART_RX_GPIO_CLK_ENABLE(); /* ½ÓÊÕÒý½ÅʱÖÓʹÄÜ */
gpio_init_struct.Pin = USART_TX_GPIO_PIN; /* TXÒý½Å */
gpio_init_struct.Mode = GPIO_MODE_AF_PP; /* ¸´ÓÃÍÆÍìÊä³ö */
gpio_init_struct.Pull = GPIO_PULLUP; /* ÉÏÀ */
gpio_init_struct.Speed = GPIO_SPEED_FREQ_HIGH; /* ¸ßËÙ */
gpio_init_struct.Alternate = USART_TX_GPIO_AF; /* ¸´ÓÃΪUSART1 */
HAL_GPIO_Init(USART_TX_GPIO_PORT, &gpio_init_struct); /* ³õʼ»¯·¢ËÍÒý½Å */
gpio_init_struct.Pin = USART_RX_GPIO_PIN; /* RXÒý½Å */
gpio_init_struct.Alternate = USART_RX_GPIO_AF; /* ¸´ÓÃΪUSART1 */
HAL_GPIO_Init(USART_RX_GPIO_PORT, &gpio_init_struct); /* ³õʼ»¯½ÓÊÕÒý½Å */
#if USART_EN_RX
HAL_NVIC_EnableIRQ(USART_UX_IRQn); /* ʹÄÜUSART1ÖжÏͨµÀ */
HAL_NVIC_SetPriority(USART_UX_IRQn, 3, 3); /* ÇÀÕ¼ÓÅÏȼ¶3£¬×ÓÓÅÏȼ¶3 */
#endif
}
}
/**
* @brief Rx´«Êä»Øµ÷º¯Êý
* @param huart: UART¾ä±úÀàÐÍÖ¸Õë
* @retval ÎÞ
*/
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
{
if(huart->Instance == USART_UX) /* Èç¹ûÊÇ´®¿Ú1 */
{
if((g_usart_rx_sta & 0x8000) == 0) /* ½ÓÊÕδÍê³É */
{
if(g_usart_rx_sta & 0x4000) /* ½ÓÊÕµ½ÁË0x0d */
{
if(g_rx_buffer[0] != 0x0a)
{
g_usart_rx_sta = 0; /* ½ÓÊÕ´íÎó,ÖØпªÊ¼ */
}
else
{
g_usart_rx_sta |= 0x8000; /* ½ÓÊÕÍê³ÉÁË */
}
}
else /* »¹Ã»ÊÕµ½0X0D */
{
if(g_rx_buffer[0] == 0x0d)
{
g_usart_rx_sta |= 0x4000;
}
else
{
g_usart_rx_buf[g_usart_rx_sta & 0X3FFF] = g_rx_buffer[0] ;
g_usart_rx_sta++;
if(g_usart_rx_sta > (USART_REC_LEN - 1))
{
g_usart_rx_sta = 0; /* ½ÓÊÕÊý¾Ý´íÎó,ÖØпªÊ¼½ÓÊÕ */
}
}
}
}
HAL_UART_Receive_IT(&g_uart1_handle, (uint8_t *)g_rx_buffer, RXBUFFERSIZE);
}
}
/**
* @brief ´®¿Ú1ÖжϷþÎñº¯Êý
* @param ÎÞ
* @retval ÎÞ
*/
void USART_UX_IRQHandler(void)
{
#if SYS_SUPPORT_OS /* ʹÓÃOS */
OSIntEnter();
#endif
HAL_UART_IRQHandler(&g_uart1_handle); /* µ÷ÓÃHAL¿âÖжϴ¦Àí¹«Óú¯Êý */
#if SYS_SUPPORT_OS /* ʹÓÃOS */
OSIntExit();
#endif
}
#endif
/**
****************************************************************************************************
* @file usart.c
* @author ÕýµãÔ×ÓÍŶÓ(ALIENTEK)
* @version V1.1
* @date 2023-06-05
* @brief ´®¿Ú³õʼ»¯´úÂë(Ò»°ãÊÇ´®¿Ú1)£¬Ö§³Öprintf
* @license Copyright (c) 2020-2032, ¹ãÖÝÊÐÐÇÒíµç×ӿƼ¼ÓÐÏÞ¹«Ë¾
****************************************************************************************************
* @attention
*
* ʵÑéƽ̨:ÕýµãÔ×Ó Ì½Ë÷Õß F407¿ª·¢°å
* ÔÚÏßÊÓƵ:www.yuanzige.com
* ¼¼ÊõÂÛ̳:www.openedv.com
* ¹«Ë¾ÍøÖ·:www.alientek.com
* ¹ºÂòµØÖ·:openedv.taobao.com
*
* ÐÞ¸Ä˵Ã÷
* V1.0 20211014
* µÚÒ»´Î·¢²¼
* V1.1 20230605
* ɾ³ýUSART_UX_IRQHandler()º¯ÊýµÄ³¬Ê±´¦ÀíºÍÐÞ¸ÄHAL_UART_RxCpltCallback()
****************************************************************************************************
*/
#include "./SYSTEM/sys/sys.h"
#include "./SYSTEM/usart/usart.h"
/* Èç¹ûʹÓÃos,Ôò°üÀ¨ÏÂÃæµÄÍ·Îļþ¼´¿É */
#if SYS_SUPPORT_OS
#include "os.h" /* os ʹÓà */
#endif
/******************************************************************************************/
/* ¼ÓÈëÒÔÏ´úÂë, Ö§³Öprintfº¯Êý, ¶ø²»ÐèҪѡÔñuse MicroLIB */
#if 1
#if (__ARMCC_VERSION >= 6010050) /* ʹÓÃAC6±àÒëÆ÷ʱ */
__asm(".global __use_no_semihosting\n\t"); /* ÉùÃ÷²»Ê¹ÓðëÖ÷»úģʽ */
__asm(".global __ARM_use_no_argv \n\t"); /* AC6ÏÂÐèÒªÉùÃ÷mainº¯ÊýΪÎÞ²ÎÊý¸ñʽ£¬·ñÔò²¿·ÖÀý³Ì¿ÉÄܳöÏÖ°ëÖ÷»úģʽ */
#else
/* ʹÓÃAC5±àÒëÆ÷ʱ, ÒªÔÚÕâÀﶨÒå__FILE ºÍ ²»Ê¹ÓðëÖ÷»úģʽ */
#pragma import(__use_no_semihosting)
struct __FILE
{
int handle;
/* Whatever you require here. If the only file you are using is */
/* standard output using printf() for debugging, no file handling */
/* is required. */
};
#endif
/* ²»Ê¹ÓðëÖ÷»úģʽ£¬ÖÁÉÙÐèÒªÖض¨Òå_ttywrch\_sys_exit\_sys_command_stringº¯Êý,ÒÔͬʱ¼æÈÝAC6ºÍAC5ģʽ */
int _ttywrch(int ch)
{
ch = ch;
return ch;
}
/* ¶¨Òå_sys_exit()ÒÔ±ÜÃâʹÓðëÖ÷»úģʽ */
void _sys_exit(int x)
{
x = x;
}
char *_sys_command_string(char *cmd, int len)
{
return NULL;
}
/* FILE ÔÚ stdio.hÀïÃ涨Òå. */
FILE __stdout;
/* Öض¨Òåfputcº¯Êý, printfº¯Êý×îÖÕ»áͨ¹ýµ÷ÓÃfputcÊä³ö×Ö·û´®µ½´®¿Ú */
int fputc(int ch, FILE *f)
{
while ((USART1->SR & 0X40) == 0); /* µÈ´ýÉÏÒ»¸ö×Ö·û·¢ËÍÍê³É */
USART1->DR = (uint8_t)ch; /* ½«Òª·¢Ë͵Ä×Ö·û ch дÈëµ½DR¼Ä´æÆ÷ */
return ch;
}
#endif
/***********************************************END*******************************************/
#if USART_EN_RX /* Èç¹ûʹÄÜÁ˽ÓÊÕ */
/* ½ÓÊÕ»º³å, ×î´óUSART_REC_LEN¸ö×Ö½Ú. */
uint8_t g_usart_rx_buf[USART_REC_LEN];
/* ½ÓÊÕ״̬
* bit15£¬ ½ÓÊÕÍê³É±êÖ¾
* bit14£¬ ½ÓÊÕµ½0x0d
* bit13~0£¬ ½ÓÊÕµ½µÄÓÐЧ×Ö½ÚÊýÄ¿
*/
uint16_t g_usart_rx_sta = 0;
uint8_t g_rx_buffer[RXBUFFERSIZE]; /* HAL¿âʹÓõĴ®¿Ú½ÓÊÕ»º³å */
UART_HandleTypeDef g_uart1_handle; /* UART¾ä±ú */
/**
* @brief ´®¿ÚX³õʼ»¯º¯Êý
* @param baudrate: ²¨ÌØÂÊ, ¸ù¾Ý×Ô¼ºÐèÒªÉèÖò¨ÌØÂÊÖµ
* @note ×¢Òâ: ±ØÐëÉèÖÃÕýÈ·µÄʱÖÓÔ´, ·ñÔò´®¿Ú²¨ÌØÂʾͻáÉèÖÃÒì³£.
* ÕâÀïµÄUSARTµÄʱÖÓÔ´ÔÚsys_stm32_clock_init()º¯ÊýÖÐÒѾÉèÖùýÁË.
* @retval ÎÞ
*/
void usart_init(uint32_t baudrate)
{
g_uart1_handle.Instance = USART_UX; /* USART1 */
g_uart1_handle.Init.BaudRate = baudrate; /* ²¨ÌØÂÊ */
g_uart1_handle.Init.WordLength = UART_WORDLENGTH_8B; /* ×Ö³¤Îª8λÊý¾Ý¸ñʽ */
g_uart1_handle.Init.StopBits = UART_STOPBITS_1; /* Ò»¸öֹͣλ */
g_uart1_handle.Init.Parity = UART_PARITY_NONE; /* ÎÞÆæżУÑéλ */
g_uart1_handle.Init.HwFlowCtl = UART_HWCONTROL_NONE; /* ÎÞÓ²¼þÁ÷¿Ø */
g_uart1_handle.Init.Mode = UART_MODE_TX_RX; /* ÊÕ·¢Ä£Ê½ */
HAL_UART_Init(&g_uart1_handle); /* HAL_UART_Init()»áʹÄÜUART1 */
/* ¸Ãº¯Êý»á¿ªÆô½ÓÊÕÖжϣº±ê־λUART_IT_RXNE£¬²¢ÇÒÉèÖýÓÊÕ»º³åÒÔ¼°½ÓÊÕ»º³å½ÓÊÕ×î´óÊý¾ÝÁ¿ */
HAL_UART_Receive_IT(&g_uart1_handle, (uint8_t *)g_rx_buffer, RXBUFFERSIZE);
}
/**
* @brief UARTµ×²ã³õʼ»¯º¯Êý
* @param huart: UART¾ä±úÀàÐÍÖ¸Õë
* @note ´Ëº¯Êý»á±»HAL_UART_Init()µ÷ÓÃ
* Íê³ÉʱÖÓʹÄÜ£¬Òý½ÅÅäÖã¬ÖжÏÅäÖÃ
* @retval ÎÞ
*/
void HAL_UART_MspInit(UART_HandleTypeDef *huart)
{
GPIO_InitTypeDef gpio_init_struct;
if(huart->Instance == USART_UX) /* Èç¹ûÊÇ´®¿Ú1£¬½øÐд®¿Ú1 MSP³õʼ»¯ */
{
USART_UX_CLK_ENABLE(); /* USART1 ʱÖÓʹÄÜ */
USART_TX_GPIO_CLK_ENABLE(); /* ·¢ËÍÒý½ÅʱÖÓʹÄÜ */
USART_RX_GPIO_CLK_ENABLE(); /* ½ÓÊÕÒý½ÅʱÖÓʹÄÜ */
gpio_init_struct.Pin = USART_TX_GPIO_PIN; /* TXÒý½Å */
gpio_init_struct.Mode = GPIO_MODE_AF_PP; /* ¸´ÓÃÍÆÍìÊä³ö */
gpio_init_struct.Pull = GPIO_PULLUP; /* ÉÏÀ */
gpio_init_struct.Speed = GPIO_SPEED_FREQ_HIGH; /* ¸ßËÙ */
gpio_init_struct.Alternate = USART_TX_GPIO_AF; /* ¸´ÓÃΪUSART1 */
HAL_GPIO_Init(USART_TX_GPIO_PORT, &gpio_init_struct); /* ³õʼ»¯·¢ËÍÒý½Å */
gpio_init_struct.Pin = USART_RX_GPIO_PIN; /* RXÒý½Å */
gpio_init_struct.Alternate = USART_RX_GPIO_AF; /* ¸´ÓÃΪUSART1 */
HAL_GPIO_Init(USART_RX_GPIO_PORT, &gpio_init_struct); /* ³õʼ»¯½ÓÊÕÒý½Å */
#if USART_EN_RX
HAL_NVIC_EnableIRQ(USART_UX_IRQn); /* ʹÄÜUSART1ÖжÏͨµÀ */
HAL_NVIC_SetPriority(USART_UX_IRQn, 3, 3); /* ÇÀÕ¼ÓÅÏȼ¶3£¬×ÓÓÅÏȼ¶3 */
#endif
}
}
/**
* @brief Rx´«Êä»Øµ÷º¯Êý
* @param huart: UART¾ä±úÀàÐÍÖ¸Õë
* @retval ÎÞ
*/
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
{
if(huart->Instance == USART_UX) /* Èç¹ûÊÇ´®¿Ú1 */
{
if((g_usart_rx_sta & 0x8000) == 0) /* ½ÓÊÕδÍê³É */
{
if(g_usart_rx_sta & 0x4000) /* ½ÓÊÕµ½ÁË0x0d */
{
if(g_rx_buffer[0] != 0x0a)
{
g_usart_rx_sta = 0; /* ½ÓÊÕ´íÎó,ÖØпªÊ¼ */
}
else
{
g_usart_rx_sta |= 0x8000; /* ½ÓÊÕÍê³ÉÁË */
}
}
else /* »¹Ã»ÊÕµ½0X0D */
{
if(g_rx_buffer[0] == 0x0d)
{
g_usart_rx_sta |= 0x4000;
}
else
{
g_usart_rx_buf[g_usart_rx_sta & 0X3FFF] = g_rx_buffer[0] ;
g_usart_rx_sta++;
if(g_usart_rx_sta > (USART_REC_LEN - 1))
{
g_usart_rx_sta = 0; /* ½ÓÊÕÊý¾Ý´íÎó,ÖØпªÊ¼½ÓÊÕ */
}
}
}
}
HAL_UART_Receive_IT(&g_uart1_handle, (uint8_t *)g_rx_buffer, RXBUFFERSIZE);
}
}
/**
* @brief ´®¿Ú1ÖжϷþÎñº¯Êý
* @param ÎÞ
* @retval ÎÞ
*/
void USART_UX_IRQHandler(void)
{
#if SYS_SUPPORT_OS /* ʹÓÃOS */
OSIntEnter();
#endif
HAL_UART_IRQHandler(&g_uart1_handle); /* µ÷ÓÃHAL¿âÖжϴ¦Àí¹«Óú¯Êý */
#if SYS_SUPPORT_OS /* ʹÓÃOS */
OSIntExit();
#endif
}
#endif
/**
****************************************************************************************************
* @file usart.c
* @author ÕýµãÔ×ÓÍŶÓ(ALIENTEK)
* @version V1.1
* @date 2023-06-05
* @brief ´®¿Ú³õʼ»¯´úÂë(Ò»°ãÊÇ´®¿Ú1)£¬Ö§³Öprintf
* @license Copyright (c) 2020-2032, ¹ãÖÝÊÐÐÇÒíµç×ӿƼ¼ÓÐÏÞ¹«Ë¾
****************************************************************************************************
* @attention
*
* ʵÑéƽ̨:ÕýµãÔ×Ó Ì½Ë÷Õß F407¿ª·¢°å
* ÔÚÏßÊÓƵ:www.yuanzige.com
* ¼¼ÊõÂÛ̳:www.openedv.com
* ¹«Ë¾ÍøÖ·:www.alientek.com
* ¹ºÂòµØÖ·:openedv.taobao.com
*
* ÐÞ¸Ä˵Ã÷
* V1.0 20211014
* µÚÒ»´Î·¢²¼
* V1.1 20230605
* ɾ³ýUSART_UX_IRQHandler()º¯ÊýµÄ³¬Ê±´¦ÀíºÍÐÞ¸ÄHAL_UART_RxCpltCallback()
****************************************************************************************************
*/
#include "./SYSTEM/sys/sys.h"
#include "./SYSTEM/usart/usart.h"
/* Èç¹ûʹÓÃos,Ôò°üÀ¨ÏÂÃæµÄÍ·Îļþ¼´¿É */
#if SYS_SUPPORT_OS
#include "os.h" /* os ʹÓà */
#endif
/******************************************************************************************/
/* ¼ÓÈëÒÔÏ´úÂë, Ö§³Öprintfº¯Êý, ¶ø²»ÐèҪѡÔñuse MicroLIB */
#if 1
#if (__ARMCC_VERSION >= 6010050) /* ʹÓÃAC6±àÒëÆ÷ʱ */
__asm(".global __use_no_semihosting\n\t"); /* ÉùÃ÷²»Ê¹ÓðëÖ÷»úģʽ */
__asm(".global __ARM_use_no_argv \n\t"); /* AC6ÏÂÐèÒªÉùÃ÷mainº¯ÊýΪÎÞ²ÎÊý¸ñʽ£¬·ñÔò²¿·ÖÀý³Ì¿ÉÄܳöÏÖ°ëÖ÷»úģʽ */
#else
/* ʹÓÃAC5±àÒëÆ÷ʱ, ÒªÔÚÕâÀﶨÒå__FILE ºÍ ²»Ê¹ÓðëÖ÷»úģʽ */
#pragma import(__use_no_semihosting)
struct __FILE
{
int handle;
/* Whatever you require here. If the only file you are using is */
/* standard output using printf() for debugging, no file handling */
/* is required. */
};
#endif
/* ²»Ê¹ÓðëÖ÷»úģʽ£¬ÖÁÉÙÐèÒªÖض¨Òå_ttywrch\_sys_exit\_sys_command_stringº¯Êý,ÒÔͬʱ¼æÈÝAC6ºÍAC5ģʽ */
int _ttywrch(int ch)
{
ch = ch;
return ch;
}
/* ¶¨Òå_sys_exit()ÒÔ±ÜÃâʹÓðëÖ÷»úģʽ */
void _sys_exit(int x)
{
x = x;
}
char *_sys_command_string(char *cmd, int len)
{
return NULL;
}
/* FILE ÔÚ stdio.hÀïÃ涨Òå. */
FILE __stdout;
/* Öض¨Òåfputcº¯Êý, printfº¯Êý×îÖÕ»áͨ¹ýµ÷ÓÃfputcÊä³ö×Ö·û´®µ½´®¿Ú */
int fputc(int ch, FILE *f)
{
while ((USART1->SR & 0X40) == 0); /* µÈ´ýÉÏÒ»¸ö×Ö·û·¢ËÍÍê³É */
USART1->DR = (uint8_t)ch; /* ½«Òª·¢Ë͵Ä×Ö·û ch дÈëµ½DR¼Ä´æÆ÷ */
return ch;
}
#endif
/***********************************************END*******************************************/
#if USART_EN_RX /* Èç¹ûʹÄÜÁ˽ÓÊÕ */
/* ½ÓÊÕ»º³å, ×î´óUSART_REC_LEN¸ö×Ö½Ú. */
uint8_t g_usart_rx_buf[USART_REC_LEN];
/* ½ÓÊÕ״̬
* bit15£¬ ½ÓÊÕÍê³É±êÖ¾
* bit14£¬ ½ÓÊÕµ½0x0d
* bit13~0£¬ ½ÓÊÕµ½µÄÓÐЧ×Ö½ÚÊýÄ¿
*/
uint16_t g_usart_rx_sta = 0;
uint8_t g_rx_buffer[RXBUFFERSIZE]; /* HAL¿âʹÓõĴ®¿Ú½ÓÊÕ»º³å */
UART_HandleTypeDef g_uart1_handle; /* UART¾ä±ú */
/**
* @brief ´®¿ÚX³õʼ»¯º¯Êý
* @param baudrate: ²¨ÌØÂÊ, ¸ù¾Ý×Ô¼ºÐèÒªÉèÖò¨ÌØÂÊÖµ
* @note ×¢Òâ: ±ØÐëÉèÖÃÕýÈ·µÄʱÖÓÔ´, ·ñÔò´®¿Ú²¨ÌØÂʾͻáÉèÖÃÒì³£.
* ÕâÀïµÄUSARTµÄʱÖÓÔ´ÔÚsys_stm32_clock_init()º¯ÊýÖÐÒѾÉèÖùýÁË.
* @retval ÎÞ
*/
void usart_init(uint32_t baudrate)
{
g_uart1_handle.Instance = USART_UX; /* USART1 */
g_uart1_handle.Init.BaudRate = baudrate; /* ²¨ÌØÂÊ */
g_uart1_handle.Init.WordLength = UART_WORDLENGTH_8B; /* ×Ö³¤Îª8λÊý¾Ý¸ñʽ */
g_uart1_handle.Init.StopBits = UART_STOPBITS_1; /* Ò»¸öֹͣλ */
g_uart1_handle.Init.Parity = UART_PARITY_NONE; /* ÎÞÆæżУÑéλ */
g_uart1_handle.Init.HwFlowCtl = UART_HWCONTROL_NONE; /* ÎÞÓ²¼þÁ÷¿Ø */
g_uart1_handle.Init.Mode = UART_MODE_TX_RX; /* ÊÕ·¢Ä£Ê½ */
HAL_UART_Init(&g_uart1_handle); /* HAL_UART_Init()»áʹÄÜUART1 */
/* ¸Ãº¯Êý»á¿ªÆô½ÓÊÕÖжϣº±ê־λUART_IT_RXNE£¬²¢ÇÒÉèÖýÓÊÕ»º³åÒÔ¼°½ÓÊÕ»º³å½ÓÊÕ×î´óÊý¾ÝÁ¿ */
HAL_UART_Receive_IT(&g_uart1_handle, (uint8_t *)g_rx_buffer, RXBUFFERSIZE);
}
/**
* @brief UARTµ×²ã³õʼ»¯º¯Êý
* @param huart: UART¾ä±úÀàÐÍÖ¸Õë
* @note ´Ëº¯Êý»á±»HAL_UART_Init()µ÷ÓÃ
* Íê³ÉʱÖÓʹÄÜ£¬Òý½ÅÅäÖã¬ÖжÏÅäÖÃ
* @retval ÎÞ
*/
void HAL_UART_MspInit(UART_HandleTypeDef *huart)
{
GPIO_InitTypeDef gpio_init_struct;
if(huart->Instance == USART_UX) /* Èç¹ûÊÇ´®¿Ú1£¬½øÐд®¿Ú1 MSP³õʼ»¯ */
{
USART_UX_CLK_ENABLE(); /* USART1 ʱÖÓʹÄÜ */
USART_TX_GPIO_CLK_ENABLE(); /* ·¢ËÍÒý½ÅʱÖÓʹÄÜ */
USART_RX_GPIO_CLK_ENABLE(); /* ½ÓÊÕÒý½ÅʱÖÓʹÄÜ */
gpio_init_struct.Pin = USART_TX_GPIO_PIN; /* TXÒý½Å */
gpio_init_struct.Mode = GPIO_MODE_AF_PP; /* ¸´ÓÃÍÆÍìÊä³ö */
gpio_init_struct.Pull = GPIO_PULLUP; /* ÉÏÀ */
gpio_init_struct.Speed = GPIO_SPEED_FREQ_HIGH; /* ¸ßËÙ */
gpio_init_struct.Alternate = USART_TX_GPIO_AF; /* ¸´ÓÃΪUSART1 */
HAL_GPIO_Init(USART_TX_GPIO_PORT, &gpio_init_struct); /* ³õʼ»¯·¢ËÍÒý½Å */
gpio_init_struct.Pin = USART_RX_GPIO_PIN; /* RXÒý½Å */
gpio_init_struct.Alternate = USART_RX_GPIO_AF; /* ¸´ÓÃΪUSART1 */
HAL_GPIO_Init(USART_RX_GPIO_PORT, &gpio_init_struct); /* ³õʼ»¯½ÓÊÕÒý½Å */
#if USART_EN_RX
HAL_NVIC_EnableIRQ(USART_UX_IRQn); /* ʹÄÜUSART1ÖжÏͨµÀ */
HAL_NVIC_SetPriority(USART_UX_IRQn, 3, 3); /* ÇÀÕ¼ÓÅÏȼ¶3£¬×ÓÓÅÏȼ¶3 */
#endif
}
}
/**
* @brief Rx´«Êä»Øµ÷º¯Êý
* @param huart: UART¾ä±úÀàÐÍÖ¸Õë
* @retval ÎÞ
*/
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
{
if(huart->Instance == USART_UX) /* Èç¹ûÊÇ´®¿Ú1 */
{
if((g_usart_rx_sta & 0x8000) == 0) /* ½ÓÊÕδÍê³É */
{
if(g_usart_rx_sta & 0x4000) /* ½ÓÊÕµ½ÁË0x0d */
{
if(g_rx_buffer[0] != 0x0a)
{
g_usart_rx_sta = 0; /* ½ÓÊÕ´íÎó,ÖØпªÊ¼ */
}
else
{
g_usart_rx_sta |= 0x8000; /* ½ÓÊÕÍê³ÉÁË */
}
}
else /* »¹Ã»ÊÕµ½0X0D */
{
if(g_rx_buffer[0] == 0x0d)
{
g_usart_rx_sta |= 0x4000;
}
else
{
g_usart_rx_buf[g_usart_rx_sta & 0X3FFF] = g_rx_buffer[0] ;
g_usart_rx_sta++;
if(g_usart_rx_sta > (USART_REC_LEN - 1))
{
g_usart_rx_sta = 0; /* ½ÓÊÕÊý¾Ý´íÎó,ÖØпªÊ¼½ÓÊÕ */
}
}
}
}
HAL_UART_Receive_IT(&g_uart1_handle, (uint8_t *)g_rx_buffer, RXBUFFERSIZE);
}
}
/**
* @brief ´®¿Ú1ÖжϷþÎñº¯Êý
* @param ÎÞ
* @retval ÎÞ
*/
void USART_UX_IRQHandler(void)
{
#if SYS_SUPPORT_OS /* ʹÓÃOS */
OSIntEnter();
#endif
HAL_UART_IRQHandler(&g_uart1_handle); /* µ÷ÓÃHAL¿âÖжϴ¦Àí¹«Óú¯Êý */
#if SYS_SUPPORT_OS /* ʹÓÃOS */
OSIntExit();
#endif
}
#endif
(我要使输入的在LCD上面显示应该怎么做)
最新发布
本文详细介绍了腾讯企业邮箱在创建账号后首次登录时遇到的密码异常问题（501）。用户需通过指定网址登录并按指引更换初始密码，之后即可使用新密码正常发送邮件。
扫一扫
5785
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
