What's Quality of service (QoS)?

 

Quality of service

From Wikipedia, the free encyclopedia

In the field of computer networking and other packet-switched telecommunication networks, the traffic engineering term quality of service (QoS) refers to resource reservation control mechanisms rather than the achieved service quality. Quality of service is the ability to provide different priority to different applications, users, or data flows, or to guarantee a certain level of performance to a data flow. For example, a required bit rate, delay, jitter, packet dropping probability and/or bit error rate may be guaranteed. Quality of service guarantees are important if the network capacity is insufficient, especially for real-time streaming multimedia applications such as voice over IP, online games and IP-TV, since these often require fixed bit rate and are delay sensitive, and in networks where the capacity is a limited resource, for example in cellular data communication. In the absence of network congestion, QoS mechanisms are not required.

A network or protocol that supports QoS may agree on a traffic contract with the application software and reserve capacity in the network nodes, for example during a session establishment phase. During the session it may monitor the achieved level of performance, for example the data rate and delay, and dynamically control scheduling priorities in the network nodes. It may release the reserved capacity during a tear down phase.

A best-effort network or service does not support quality of service. An alternative to complex QoS control mechanisms is to provide high quality communication over a best-effort network by over-provisioning the capacity so that it is sufficient for the expected peak traffic load.

In the field of telephony, quality of service was defined in the ITU standard X.902 as "A set of quality requirements on the collective behavior of one or more objects". Quality of Service comprises requirements on all the aspects of a connection, such as service response time, loss, signal-to-noise ratio, cross-talk, echo, interrupts, frequency response, loudness levels, and so on. A subset of telephony QoS is Grade of Service (GOS) requirements, which comprises aspects of a connection relating to capacity and coverage of a network, for example guaranteed maximum blocking probability and outage probability.[1]

QoS is sometimes used as a quality measure, with many alternative definitions, rather than referring to the ability to reserve resources. Quality of service sometimes refers to the level of quality of service, i.e. the guaranteed service quality. High QoS is often confused with a high level of performance or achieved service quality, for example high bit rate, low latency and low bit error probability.

基于python实现的粒子群的VRP(车辆配送路径规划)问题建模求解+源码+项目文档+算法解析,适合毕业设计、课程设计、项目开发。项目源码已经过严格测试,可以放心参考并在此基础上延申使用,详情见md文档 算法设计的关键在于如何向表现较好的个体学习,标准粒子群算法引入惯性因子w、自我认知因子c1、社会认知因子c2分别作为自身、当代最优解和历史最优解的权重,指导粒子速度和位置的更新,这在求解函数极值问题时比较容易实现,而在VRP问题上,速度位置的更新则难以直接采用加权的方式进行,一个常见的方法是采用基于遗传算法交叉算子的混合型粒子群算法进行求解,这里采用顺序交叉算子,对惯性因子w、自我认知因子c1、社会认知因子c2则以w/(w+c1+c2),c1/(w+c1+c2),c2/(w+c1+c2)的概率接受粒子本身、当前最优解、全局最优解交叉的父代之一(即按概率选择其中一个作为父代,不加权)。 算法设计的关键在于如何向表现较好的个体学习,标准粒子群算法引入惯性因子w、自我认知因子c1、社会认知因子c2分别作为自身、当代最优解和历史最优解的权重,指导粒子速度和位置的更新,这在求解函数极值问题时比较容易实现,而在VRP问题上,速度位置的更新则难以直接采用加权的方式进行,一个常见的方法是采用基于遗传算法交叉算子的混合型粒子群算法进行求解,这里采用顺序交叉算子,对惯性因子w、自我认知因子c1、社会认知因子c2则以w/(w+c1+c2),c1/(w+c1+c2),c2/(w+c1+c2)的概率接受粒子本身、当前最优解、全局最优解交叉的父代之一(即按概率选择其中一个作为父代,不加权)。
### AT Command MQTT QoS 2 Subscription Example and Information For devices that support both cellular communication through modems and the MQTT protocol, using AT commands can be an effective way to manage subscriptions at Quality of Service (QoS) level 2. This ensures messages are delivered exactly once by requiring acknowledgment from both sender and receiver. #### Setting Up MQTT Client Using AT Commands To establish a connection with an MQTT broker and subscribe to topics with QoS 2: 1. **Initialize Network Connection** Ensure network registration is complete before proceeding with MQTT operations. ```plaintext AT+CGATT=1 OK ``` 2. **Establish TCP/IP Socket** Create a socket for connecting to the MQTT server over TLS/SSL if necessary[^2]. ```plaintext AT+QIOPEN="TCP","mqtt.example.com",8883 ``` 3. **Connect as MQTT Client** Use specific AT commands provided by modem manufacturers like Quectel or SIMCom which include parameters such as client ID, username, password, etc., along with setting up clean session flags and keep-alive intervals. ```plaintext AT+QMTCFG="will",0,"topic/will",0,0,0,"message" AT+QMTCFG="keepalive",0,60 AT+QMTCONN=0,"clientID" ``` 4. **Subscribe Topic With QoS Level 2** Specify topic name followed by desired QoS value when subscribing; here `2` indicates highest reliability where message delivery confirmation must occur between publisher and subscriber. ```plaintext AT+QMTSUB=0,1,"sensor/data",2 ``` This command subscribes to `"sensor/data"` under index `0`, expecting all incoming publications on this subject adhere strictly to QoS 2 semantics ensuring reliable transmission without duplication. 5. **Handling Incoming Messages** Once subscribed successfully, any published data matching specified criteria will trigger notification events within device firmware/application layer allowing further processing based upon application logic requirements. --- --related questions-- 1. How does one configure SSL/TLS settings while establishing an MQTT connection via AT commands? 2. What steps need to be taken after receiving a successful SUBACK response during subscription attempts? 3. Can multiple clients share same credentials while performing high-reliability communications over MQTT networks? 4. Are there differences in implementing QoS levels across various IoT platforms supporting MQTT protocol? 5. Which error codes might appear due to failed QoS 2 subscriptions and how could these issues potentially get resolved?
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值