LINUX修改为从WIN默认启动

很多朋友会在尝鲜装上linux后发现在grub的引导下，默认的启动系统是linux对于在大多数时间使用win朋友，每次启动时都在盯着屏幕从而选择从win启动。其实这个问题很好解决，只要在linux下修改一下grub就可以了。
以我的ubuntu8.10为例就是：
从terminal:
1：sudo vim /boot/grub/menu.lst
当然你不习惯用vim的话也可以用其它的编辑器，如 sudo gedit /boot/grub/menu.lst

2：出现以下代码：

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default    0      //默认进入的系统

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout    10   //进入默认系统的时间

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title    Windows 95/98/NT/2000
# root    (hd0,0)
# makeactive
# chainloader +1
#
# title    Linux
# root    (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=75346847-2217-4a42-8d64-34883a743b26 ro locale=zh_CN

## default grub root device
## e.g. groot=(hd0,0)
# groot=75346847-2217-4a42-8d64-34883a743b26

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title    Ubuntu 8.10, kernel 2.6.27-7-generic
uuid    75346847-2217-4a42-8d64-34883a743b26
kernel    /boot/vmlinuz-2.6.27-7-generic root=UUID=75346847-2217-4a42-8d64-34883a743b26 ro locale=zh_CN quiet splash
initrd    /boot/initrd.img-2.6.27-7-generic
quiet

title    Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode)
uuid    75346847-2217-4a42-8d64-34883a743b26
kernel    /boot/vmlinuz-2.6.27-7-generic root=UUID=75346847-2217-4a42-8d64-34883a743b26 ro locale=zh_CN single
initrd    /boot/initrd.img-2.6.27-7-generic

title    Ubuntu 8.10, memtest86+
uuid    75346847-2217-4a42-8d64-34883a743b26
kernel    /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title    Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS     //xp排在第4（从0算）
# on /dev/sda1
title    Microsoft Windows XP Professional
root    (hd0,0)
savedefault
makeactive
chainloader +1

###这个就是你的win对应的启动选项了

 

只要将那个defalt 0 改成4，就行了

当然你也可以修改等待的时间，相信你早就猜到了，就是改timeout后面的那个数字，单位是秒！！！

 

OK!!!!