win2008使用windows loader激活提示Unsupported partition table

最新推荐文章于 2023-12-21 13:19:20 发布

原创最新推荐文章于 2023-12-21 13:19:20 发布 · 8.7k 阅读

1 ·

CC 4.0 BY-SA版权

文章标签：

#操作系统

windows 专栏收录该内容

20 篇文章

订阅专栏

本文解答了使用GPT分区表在UEFI主板上加载器出现“不支持的分区表”错误的原因，并提供了预格式化硬盘使用MBR替换的解决方案。此外，还讨论了激活Windows后重启时停留在引导阶段的问题，并提供了解决方法，包括禁用内存类型和尝试选择传统设置。

Q. The loaders status says “Unsupported partition table”, why is this?
A. You’re either using GPT on a UEFI motherboard or you’ve got a locked OEM partition. Both problems can be fixed by fully formatting your entire hard drive.

The loader doesn’t work when the systems using GPT via UEFI. The workaround is to pre-format your hard drive so that it uses MBR instead.

From your BIOS select to boot the Windows DVD without UEFI, go to the repair options, select command prompt and then enter this:

diskpart
list disk
select disk 0
clean
convert mbr
create partition primary
select partition 1
format fs=ntsf quick

Boot the Windows DVD the same way you did the first time and then continue with the installation of Windows. Once complete you can install the loader.

boot the Windows DVD without UEFI意思就是引导项选legacy only

在create partition primary时记得加size指定大小，单位M。

原文：http://www.byshang.cn/soft/2323.html

其实就是readme的内容。

激活后重启，停留在引导阶段，不能进入windows。

再看readme中提到：

Q. I installed the loader and my system hangs during the boot process, can I fix it?

A. Go to the advanced options and select to disable type 4 memory, install the loader again and see if that cures it. If you’re not cured try to disable type 3 memory instead. If it still fails try selecting the legacy setting.

要Go to the advanced options先修复引导才行：

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd