Fedora 7上安装VMware Tools

花了一天时间安装vmware tools

首先说明一下软件情况：
vmware workstation 5.5.1
FC7

依照前一篇文章的做法，一步步按照默认的设置下来，出现错误：
What is the location of the directory of C header files that match your running kernel? [/usr/src/linux/include]
The path "/usr/src/linux/include" is not an existing directory.
查看目录/usr/src/ 根本没有linux这个目录
只有/usr/src/redhat

google/baidu解决方案：
1. 用vmware-any-any-update109打补丁
    很不幸，下载完后，解压 安装出错

[root@localhost vmware-any-any-update109]# ./runme.pl
Unable to open the installer database /etc/vmware/locations in read-mode.

Execution aborted.

2. 继续google：有人说是kernel-source 没有安装
用RPM命令查看一下
  [root@localhost ~]# rpm -q kernel-source
package kernel-source is not installed
....
（接下来便是漫长而痛苦又无用的kernel source  安装过程
不写了--因为在这里是无用功—）

3. 第三种方案是安装kernel devel包
先查看内核版本号
[root@localhost ~]# uname -r
2.6.20-2925.9fc7xen
[root@localhost ~]# rpm -q kernel-xen-devel
package kernel-xen-devel is not installed

这是Xen的内核，所以，要安装对应版本号的 kernel-xen-devel rpm包：
kernel-xen-devel-2.6.20-2925.9.fc7.i686.rpm
下载地址： http://hany.sk/~hany/RPM/f-7-i386/kernel-xen-devel-2.6.20-2925.9.fc7.i686.html

安装：
[root@localhost ~]# rpm -ivh kernel-xen-devel-2.6.20-2925.9.fc7.i686.rpm
完成安装后，在/usr/src/下已经多出了一个kernels目录
[root@localhost ~]# cd /usr/src/
[root@localhost src]# ls
kernels redhat
[root@localhost src]# cd kernels
[root@localhost kernels]# ls
2.6.20-2925.9.fc7xen-i686

表明kernel-xen-devel已经装好了
再次使用vmware-install.pl安装，还是出错：
What is the location of the directory of C header files that match your running kernel? [/usr/src/linux/include]
The path "/usr/src/linux/include" is not an existing directory.
如果手动改目录为：/usr/src/kernels/2.6.20-2925.9.fc7xen-i686/include，会出现错误：
The directory of kernel headers (version 2.6.20-2925.9.fc7xen) does not match your running kernel (version 2.6.20-2925.9.fc7xen). Even if  the module were tocompile successfully, it would not load into the running kernel.

-----------------------------------------------------------------------------------------------
我怀疑是不是vmware 版本低，不支持2.6.20-2925.9？
要知道，vmware tools可是VMwareTools-5.5.1-19175~~~~
换vmware workstation 6.0.0
其vmware tools 为VMwareTools-6.0.0-45731

./vmware-install.pl

就一直enter，装完VMware Tools
(可自动找到配套的the directory of C header files了，哈）

在安装的最后阶段，会出现：
Do you want to change your guest X resolution? (yes/no) [no] y

Please choose one of the following display sizes (1 - 13):

[1] "640x480"
[2]< "800x600"
[3] "1024x768"
[4] "1152x864"
[5] "1280x800"
[6] "1152x900"
[7] "1280x1024"
[8] "1376x1032"
[9] "1400x1050"
[10] "1680x1050"
[11] "1600x1200"
[12] "1920x1200"
[13] "2364x1773"

Please enter a number between 1 and 13:

[3]

重启系统，OK了

如果重启后报X-WINDOWS出错，参考网上设置

进入/etc/X11/，用文本打开xorg.conf，加上以下几段：

Section "Monitor"

Identifier "vmware"

EndSection

Section "InputDevice"

Identifier "Mouse0"

Driver "vmmouse"

Option "Protocol" "Auto"

Option "Device" "/dev/input/mouse0"

EndSection

然后找到 含有"ServerLayout" 的section, 在Section跟EndSection之间加上以下一行。

InputDevice "Mouse0" "CorePointer"

BTW，
我的xorg.conf文件里的选项设置默认为：

# Xorg configuration created by system-config-display

Section "ServerLayout"
        Identifier     "single head configuration"
        Screen      0  "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "VMMouse" "CorePointer"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier  "VMMouse"
        Driver      "vmmouse"
        Option      "Device" "/dev/input/mice"
        Option      "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
        Identifier   "vmware"
        VendorName   "VMware, Inc"
        HorizSync    1.0 - 10000.0
        VertRefresh  1.0 - 10000.0
EndSection

Section "Device"
        Identifier  "VMware SVGA"
        Driver      "vmware"
EndSection