Board Simulation with SO-DIMM slot

本文解答了如何模拟DDR333内存模块与内存控制单元之间的数据、命令和控制信号的问题。作者建议使用Micron半导体提供的模拟模型,并通过HyperLynx进行多板模拟,确保信号在内存芯片引脚的质量。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

Q:    Recently, I'm going to layout a board which has a 200 pin SO-DIMM DDR slot, a DDR 333 memory module will be plugged in. Now, I wanna to simulate the data/command/control signals of the DDR traces between the MemoryControlUnit and the SO-DIMM DDR slot. I have got the ibis module of MemoryControlUnit, how can I get the ibis module of the 200 pin SO-DIMM slot? Or is there any other way to do this simulation? I've downloaded the ibis module of DDR 333 memory module from www.micron.com, can I use this ibis module as the module of the 200 pin SO-DIMM slot?

A:

1.) i have chosen a type from the micron semiconductors, because they have simulation models for their memories
2.) download the fullboard hyperlinx model of the memory module board. download the ibis modells of the memory chipc used on the module.
3.) use hyperlynx for multiboard simulation.
4.) on the memory board, assign chip ibis models for those locations/numbers what will be used in an usual module.
5.) simulate chip-to chip! the signals can seem to be useless on the connector-pins, but dont worry: those have to be good at the chips i/o pins. (check for standard DDR2-eye)
6.) you will tell to your customers, that the board is validated in simulation with the xxx type from micron, but probably it will work with other types/brands too. and its their responsibility to use another type.

 
Q: Thank you, buenos. In your post, you wrote "4.) on the memory board, assign chip ibis models for those locations/numbers what will be used in an usual module. " I cannot understand this, what's the reason of using chip ibis models? Can u explain this in detail?
Thanks very much!

A:
because this way i can do multiboard simulations, and i can check signals on the memor-chip-pins, instead of the module pins. the signals have to be ok at the memory-chip-pins.


评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值