VIM配置笔记(cscope+NERDTree)

cscope安装

在www.sourceforge.net搜索下载cscope的tar包，解压之后进入解压之后的目录依次执行下面的命令

sudo apt-get install libncurses5-dev
sudo apt-get install flex
sudo apt-get install byacc
./configure
make
make install

从以下内容到文件~/.vimrc

""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" CSCOPE settings for vim           
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
"
" This file contains some boilerplate settings for vim's cscope interface,
" plus some keyboard mappings that I've found useful.
"
" USAGE:
" -- vim 6:     Stick this file in your ~/.vim/plugin directory (or in a
"               'plugin' directory in some other directory that is in your
"               'runtimepath'.
"
" -- vim 5:     Stick this file somewhere and 'source cscope.vim' it from
"               your ~/.vimrc file (or cut and paste it into your .vimrc).
"
" NOTE:
" These key maps use multiple keystrokes (2 or 3 keys).  If you find that vim
" keeps timing you out before you can complete them, try changing your timeout
" settings, as explained below.
"
" Happy cscoping,
"
" Jason Duell       jduell@alumni.princeton.edu     2002/3/7
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""


" This tests to see if vim was configured with the '--enable-cscope' option
" when it was compiled.  If it wasn't, time to recompile vim...
if has("cscope")

    """"""""""""" Standard cscope/vim boilerplate

    " use both cscope and ctag for 'ctrl-]', ':ta', and 'vim -t'
    set cscopetag

    " check cscope for definition of a symbol before checking ctags: set to 1
    " if you want the reverse search order.
    set csto=0

    " add any cscope database in current directory
    if filereadable("cscope.out")
        cs add cscope.out  
    " else add the database pointed to by environment variable
    elseif $CSCOPE_DB != ""
        cs add $CSCOPE_DB
    endif

    " show msg when any other cscope db added
    set cscopeverbose  


    """"""""""""" My cscope/vim key mappings
    "
    " The following maps all invoke one of the following cscope search types:
    "
    "   's'   symbol: find all references to the token under cursor
    "   'g'   global: find global definition(s) of the token under cursor
    "   'c'   calls:  find all calls to the function name under cursor
    "   't'   text:   find all instances of the text under cursor
    "   'e'   egrep:  egrep search for the word under cursor
    "   'f'   file:   open the filename under cursor
    "   'i'   includes: find files that include the filename under cursor
    "   'd'   called: find functions that function under cursor calls
    "
    " Below are three sets of the maps: one set that just jumps to your
    " search result, one that splits the existing vim window horizontally and
    " diplays your search result in the new window, and one that does the same
    " thing, but does a vertical split instead (vim 6 only).
    "
    " I've used CTRL-\ and CTRL-@ as the starting keys for these maps, as it's
    " unlikely that you need their default mappings (CTRL-\'s default use is
    " as part of CTRL-\ CTRL-N typemap, which basically just does the same
    " thing as hitting 'escape': CTRL-@ doesn't seem to have any default use).
    " If you don't like using 'CTRL-@' or CTRL-\, , you can change some or all
    " of these maps to use other keys.  One likely candidate is 'CTRL-_'
    " (which also maps to CTRL-/, which is easier to type).  By default it is
    " used to switch between Hebrew and English keyboard mode.
    "
    " All of the maps involving the macro use '^$': this is so
    " that searches over '#include " return only references to
    " 'time.h', and not 'sys/time.h', etc. (by default cscope will return all
    " files that contain 'time.h' as part of their name).


    " To do the first type of search, hit 'CTRL-\', followed by one of the
    " cscope search types above (s,g,c,t,e,f,i,d).  The result of your cscope
    " search will be displayed in the current window.  You can use CTRL-T to
    " go back to where you were before the search.  
    "

    nmap s :cs find s =expand("")    
    nmap g :cs find g =expand("")    
    nmap c :cs find c =expand("")    
    nmap t :cs find t =expand("")    
    nmap e :cs find e =expand("")    
    nmap f :cs find f =expand("")    
    nmap i :cs find i ^=expand("")$
    nmap d :cs find d =expand("")    


    " Using 'CTRL-spacebar' (intepreted as CTRL-@ by vim) then a search type
    " makes the vim window split horizontally, with search result displayed in
    " the new window.
    "
    " (Note: earlier versions of vim may not have the :scs command, but it
    " can be simulated roughly via:
    "    nmap s :cs find s =expand("")    

    nmap s :scs find s =expand("")    
    nmap g :scs find g =expand("")    
    nmap c :scs find c =expand("")    
    nmap t :scs find t =expand("")    
    nmap e :scs find e =expand("")    
    nmap f :scs find f =expand("")    
    nmap i :scs find i ^=expand("")$    
    nmap d :scs find d =expand("")    


    " Hitting CTRL-space *twice* before the search type does a vertical
    " split instead of a horizontal one (vim 6 and up only)
    "
    " (Note: you may wish to put a 'set splitright' in your .vimrc
    " if you prefer the new window on the right instead of the left

    nmap s :vert scs find s =expand("")
    nmap g :vert scs find g =expand("")
    nmap c :vert scs find c =expand("")
    nmap t :vert scs find t =expand("")
    nmap e :vert scs find e =expand("")
    nmap f :vert scs find f =expand("")    
    nmap i :vert scs find i ^=expand("")$    
    nmap d :vert scs find d =expand("")


    """"""""""""" key map timeouts
    "
    " By default Vim will only wait 1 second for each keystroke in a mapping.
    " You may find that too short with the above typemaps.  If so, you should
    " either turn off mapping timeouts via 'notimeout'.
    "
    "set notimeout
    "
    " Or, you can keep timeouts, by uncommenting the timeoutlen line below,
    " with your own personal favorite value (in milliseconds):
    "
    "set timeoutlen=4000
    "
    " Either way, since mapping timeout settings by default also set the
    " timeouts for multicharacter 'keys codes' (like ), you should also
    " set ttimeout and ttimeoutlen: otherwise, you will experience strange
    " delays as vim waits for a keystroke after you hit ESC (it will be
    " waiting to see if the ESC is actually part of a key code like ).
    "
    "set ttimeout
    "
    " personally, I find a tenth of a second to work well for key code
    " timeouts. If you experience problems and have a slow terminal or network
    " connection, set it higher.  If you don't set ttimeoutlen, the value for
    " timeoutlent (default: 1000 = 1 second, which is sluggish) is used.
    "
    "set ttimeoutlen=100

endif

使用方法参考文件的帮助

NERDTree安装

从http://www.vim.org/scripts/script.php?script_id=1658下载安装包，解压后将plugin/NERD_tree.vim和doc/NERD_tree.txt分别拷到~/.vim/plugin和 ~/.vim/doc目录

使用方法就去网上搜吧，很多