Setting up automatic network installations with AutoYaST

关注

原创最新推荐文章于 2026-11-11 18:45:00 发布 989 阅读 AI 写同款· GEO 优化 ›

家用电器维修必备：手把手教你用双向可控硅改造单相电机调速（附电路图）本文提供了一份详细的家用电器维修指南，手把手教你如何利用双向可控硅为核心元件，为单相交流电机（如风扇、排气扇）实现平滑的无级调速改造。内容涵盖核心原理、安全须知、元件选型（如BT136、DB3）、电路图解析、分步搭建教程以及常见故障排查方法，旨在帮助维修爱好者和DIY用户安全、成功地完成这一实用且富有成就感的项目。阅读详情

Creating the control file

Use the AutoYaST module found in YaST, it's called "AutoInstallation" in the Misc tab. You may need to install a yast plugin for this to appear. Copy the control file you create to /data/SUSE/autoyast.xml

Modifying the PXE configuration

Copy /srv/tftpboot/pxelinux.cfg/default to /srv/tftpboot/pxelinux.cfg/interactive. We will be replacing the default file with the following

default linux

label linux
  kernel linux
  append load_ramdisk=1 initrd=initrd autoyast=nfs://192.168.26.1/data/SUSE/autoyast.xml /
splash=silent showopts insmod=bcm5700 netdevice=eth0 /
install=nfs://192.168.26.1/data/SUSE

Remove the /'s (it's there just to preserve line length.

64-bit

If you are doing a 64-bit install, you will need to replace initrd with initrd64 and linux with linux64 above. For example:

default linux

label linux
  kernel linux64
  append load_ramdisk=1 initrd=initrd64 autoyast=nfs://192.168.26.1/data/SUSE/autoyast.xml /
splash=silent showopts insmod=bcm5700 netdevice=eth0 /
install=nfs://192.168.26.1/data/SUSE