Load Error!Press any key to reboot

最新推荐文章于 2024-04-16 17:12:13 发布
原创 最新推荐文章于 2024-04-16 17:12:13 发布 · 1.7k 阅读 · 0 ·
CC 4.0 BY-SA版权
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
文章标签：

#测试

本文描述了一台电脑启动时出现LoadError!Pressanykeytoreboot提示的问题及解决过程。作者尝试了多种方法如测试硬盘、重新安装系统等，最终通过低级格式化并重新安装系统解决了该问题。
 最近一台电脑一开机就出现Load Error!Press any key to reboot的提示,用效率源测试,没发现有坏道,查看系统也没发现有问题.重新装系统也是同样的问题出现.google了一下,也找不到答案.确认是硬盘的问题重新分区也不行.低格后重装系统,ok!
【OpenHarmony4.1 之 U-Boot 2024.07源码深度解析】018 - init_sequence_r ：重定位后的函数列表
|~~~热爱生活、努力学习的小伙汁~~~|
08-11 813
【OpenHarmony4.1 之 U-Boot 2024.07源码深度解析】018 - init_sequence_r ：重定位后的函数列表
windows一开机一直循环：No Boot Device Found. Press any key to reboot the machine解决方法
weixin_43837268的博客
02-17 1万+
二、选择Settiings/General/Boot Sequence。三、选择UEFI模式，四、选择下方APPLY。
No boot device avalible,Press any key to reboot the system
qq_40907977的博客
09-27 6123
报错信息 ： No boot device avalible,Press any key to reboot the system 没有可用的引导设备，请按任意键重新引导系统 报错原因 ： BIOS设置不对。找不到启动项。 戴尔电脑，重启之后按F2，进入BIOS 1、进入启动设备选项后，选择 1st Boot Device,设置 硬盘为第一启动项。 2、设置完成后，按下F10保存，然后重起电脑就行了。 参考连接 ： https://jingyan.baidu.com/article/48206aead
【Dell电脑】Dell开机出现No Boot device found.Press any key to reboot the machine（已解决）
热门推荐
Blue
05-08 5万+
目录首先问题出现重启后出现下图No Boot device found解决办法来了 首先问题出现 我电脑是用着用着突然出现下图所示，然后自动重启了， 重启后出现下图No Boot device found 按回车会出现 然后会一直重启重启，反复重启， o(╥﹏╥)o 解决办法来了 在电脑重启的时候，一直按F12，会进入电脑的启动项选择页面，我用的是dell电脑是这样，如果电脑型号不同可能略有不同，其他电脑可能是按F8，有些是F10，可以都尝试一下 然后出现下图所示：然后选择BIOS Setup，
系统启动时提示“ntldr is missing press any key to reboot”的处理
skygored的专栏
07-01 3805
一、启用故障恢复控制台进入字符界面（有两种办法）：1．通过光盘，使用 Windows 2000 安装盘重新启动计算机，在“欢迎使用安装程序”屏上，按 R 键修复 Windows 2000 安装。 按 C 键通过使用“恢复控制台”修复 Windows 2000 安装。2．通过选择系统启动界面的故障恢复控制台。当然这要求首先在2000下运行安装光盘上的X:/i386/winnt32 /cmdcons安
电脑出现"NTLDR is Missing Press any key to restart "如何解决.
军哥博客欢迎您
02-22 2392
NTLDR文件是win nt/win200/WinXP的引导文件，当此文件丢失时启动系统会提示“NTLDR is missing,Press CTRL+ALT+DEL to restart”，并要求按任意键重新启动，不能正确进入系统 。所以应该在系统正常的时候给予备份。 按照下面步骤进行修复： 1、将WindowsXP安装光盘放入光驱 2、进入BIOS设置为Boot From CD-ROM 3、当
报错1： /* 擦除 */ tiangong1 # nand erase.chip NAND erase.chip: device 0 whole chip Erasing at 0xffe0000 -- 100% complete. OK /* esbc */ tiangong1 # bootmenu *** U-Boot Boot Menu *** update rootfs.rw update rootfs.ro update fwk update kernel.images update uboot update esbc reboot uboot update fwk.squashfs U-Boot console Press UP/DOWN to move, ENTER to select, ESC/CTRL+C to quit hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full Using pie device TFTP from server 192.168.0.10; our IP address is 192.168.0.1 Filename 'hi_esbc.bin'. Load address: 0x86000000 Loading: ################ 6.7 MiB/s done Bytes transferred = 77004 (12ccc hex) Erasing 0x00000000 ... 0x0007ffff (4 eraseblock(s)) Writing 77004 byte(s) at offset 0x00000000 Size not on a page boundary (0x800), rounding to 0x13000 /* uboot.bin */ tiangong1 # *** U-Boot Boot Menu *** update rootfs.rw update rootfs.ro update fwk update kernel.images update uboot update esbc reboot uboot update fwk.squashfs U-Boot console Press UP/DOWN to move, ENTER to select, ESC/CTRL+C to quit hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full Using pie device TFTP from server 192.168.0.10; our IP address is 192.168.0.1 Filename 'hi_uboot.bin'. Load address: 0x86000000 Loading: ################################################################# ################################ 7.9 MiB/s done Bytes transferred = 495132 (78e1c hex) Erasing 0x00000000 ... 0x000fffff (8 eraseblock(s)) Writing 495132 byte(s) at offset 0x00000000 Size not on a page boundary (0x800), rounding to 0x79000 Erasing 0x00000000 ... 0x000fffff (8 eraseblock(s)) Writing 495132 byte(s) at offset 0x00000000 Size not on a page boundary (0x800), rounding to 0x79000 /* reset */ tiangong1 # re resetting ... reset_cpu hi-esbc start boot_info.value a0000..... boot mode 2...... match board TG1C0D8_TYPE1, board_id_val 412121 sec init spi hw init succ �up��0_ boot_info.value a0000..... flash boot mode ...... hi_nand_probe...... Nand Spec : Block[20000B] Page[800B] OOB[40B] page_shift[0b] read_addr_cycle[05] read_if_type[00] read_dummy_num[01] read_cmd[03] uboot_region_size [100000]...... This boot is main region 0 area...... nand read oob: offset 0x80000 nand read: offset 0x80000 size 0x1000 to addr 0x17512cd0 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x81000 size 0x100 to addr 0x17513cd0 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x81100 size 0x1bf0 to addr 0x17513dd0 normal boot...... no secure boot, dont check sign...... no secure boot, dont check code image..... start ddrinit from addr 17513dd0 ddrinit finish This boot is main region 0 area...... nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x82cf0 size 0x1000 to addr 0x80100f00 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x83cf0 size 0x100 to addr 0x80101f00 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read oob: offset 0xa0000 nand read oob: offset 0xc0000 nand read oob: offset 0xe0000 nand read: offset 0x83df0 size 0x7502c to addr 0x80102000 dont decrypt boot code...... no secure boot, dont check sign...... no secure boot, dont check code image..... check nvcnt...... check version start...... There is no version in efuse dice not support...... subkey_id = 0x00 esbc_mask = 0x01 bl_nvcnt = 0x01 start to uboot...... U-Boot 2022.07 (Aug 28 2025 - 11:08:19 +0800) for tiangong1 Watchdog enabled DRAM: 224 MiB Core: 139 devices, 17 uclasses, devicetree: separate NAND: device found, Manufacturer ID: 0xc8, Chip ID: 0x92 GigaDevice GD5F2GM7UEYIGR GigaDevice GD5F2GM7UEYIGR 256 MiB, MLC, erase size: 128 KiB, page size: 2048, OOB size: 128 256 MiB Loading Environment from NAND... Scanning device for bad blocks *** Warning - bad CRC, using default environment In: uart1@10119000 Out: uart1@10119000 Err: uart1@10119000 invalid bootflag, using default Saving Environment to NAND... Erasing redundant NAND... Erasing at 0x360000 -- 100% complete. Writing to redundant NAND... OK OK Reset Info: Uboot reset cmd to reset Net: lsw_dp lsw_dp: lsw_dp probe succ lsw_pfe lsw_pfe: get reset bulk failed lsw_pfe lsw_pfe: lsw_pfe probe succ hsan_mac gemac0@0: gemac0@0 probe succ mdio_bus mdio0@0: mdio_register mdio0@0 mdio_bus mdio0@0: mdio0@0 probe succ Genius Phy hwVer:0x20669a22 fwVer:0x6e01 hsan_mac gemac1@1: gemac1@1 probe succ hsan_mac gemac2@2: gemac2@2 probe succ hsan_mac gemac3@3: gemac3@3 probe succ hsan_mac gemac@8: gemac@8 probe succ mdio_bus mdio1@1: mdio_register mdio1@1 mdio_bus mdio1@1: mdio1@1 probe succ Could not get PHY for mdio1@1: addr 1 hsan_mac gemac@8: gemac@8 no phy device hsan_pie pie: pie probe succ Warning: pie (eth0) using random MAC address - 5a:60:6c:f7:b9:c3 eth0: pie bootflag a bootreg 10 hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full multiupg detect bootdelay is 3000 Hit any key to stop autoboot: 0 /* uboot */ tiangong1 # bootmenu *** U-Boot Boot Menu *** update rootfs.rw update rootfs.ro update fwk update kernel.images update uboot update esbc reboot uboot update fwk.squashfs U-Boot console Press UP/DOWN to move, ENTER to select, ESC/CTRL+C to quit hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full Using pie device TFTP from server 192.168.0.10; our IP address is 192.168.0.1 Filename 'hi_uboot.bin'. Load address: 0x86000000 Loading: ################################################################# ################################ 7.7 MiB/s done Bytes transferred = 495132 (78e1c hex) Erasing 0x00000000 ... 0x000fffff (8 eraseblock(s)) Writing 495132 byte(s) at offset 0x00000000 Size not on a page boundary (0x800), rounding to 0x79000 Erasing 0x00000000 ... 0x000fffff (8 eraseblock(s)) Writing 495132 byte(s) at offset 0x00000000 Size not on a page boundary (0x800), rounding to 0x79000 /* reset */ tiangong1 # re resetting ... reset_cpu hi-esbc start boot_info.value a0000..... boot mode 2...... match board TG1C0D8_TYPE1, board_id_val 412121 sec init spi hw init succ �oo��0_ boot_info.value a0000..... flash boot mode ...... hi_nand_probe...... Nand Spec : Block[20000B] Page[800B] OOB[40B] page_shift[0b] read_addr_cycle[05] read_if_type[00] read_dummy_num[01] read_cmd[03] uboot_region_size [100000]...... This boot is main region 0 area...... nand read oob: offset 0x80000 nand read: offset 0x80000 size 0x1000 to addr 0x17512cd0 [err] ECC error in page_addr: 0x80000, flash_status 00 nand read fail at 0x%08x Nand read from offset 0x80000 failed 1879048192 flash read ddrinit head [80000] fail...... flash boot fail...... hi-esbc start fail 70000000 hi-esbc start boot_info.value a0000..... boot mode 2...... match board TG1C0D8_TYPE1, board_id_val 412121 sec init spi hw init succ �e ��0_ boot_info.value a0000..... flash boot mode ...... hi_nand_probe...... Nand Spec : Block[20000B] Page[800B] OOB[40B] page_shift[0b] read_addr_cycle[05] read_if_type[00] read_dummy_num[01] read_cmd[03] uboot_region_size [100000]...... This boot is standby region 0 area...... nand read oob: offset 0x180000 nand read: offset 0x180000 size 0x1000 to addr 0x17512cd0 [err] ECC error in page_addr: 0x180000, flash_status 00 nand read fail at 0x%08x Nand read from offset 0x180000 failed 1879048192 flash read ddrinit head [180000] fail...... flash boot fail...... hi-esbc start fail 70000000 hi-esbc start boot_info.value a0000..... boot mode 2...... match board TG1C0D8_TYPE1, board_id_val 412121 sec init spi hw init succ �e ��0_ boot_info.value a0000..... flash boot mode ...... hi_nand_probe...... Nand Spec : Block[20000B] Page[800B] OOB[40B] page_shift[0b] read_addr_cycle[05] read_if_type[00] read_dummy_num[01] read_cmd[03] uboot_region_size [100000]...... This boot is main region 0 area...... nand read oob: offset 0x80000 nand read: offset 0x80000 size 0x1000 to addr 0x17512cd0 [err] ECC error in page_addr: 0x80000, flash_status 00 nand read fail at 0x%08x Nand read from offset 0x80000 failed 1879048192 flash read ddrinit head [80000] fail...... flash boot fail...... hi-esbc start fail 70000000 报错2： /* 擦除 */ tiangong1 # mtd erase nand0 Erasing 0x00000000 ... 0x0fffffff (2048 eraseblock(s)) attempt to erase a bad block at page 0x00007380 Skipping bad block at 0x039c0000 /* esbc */ tiangong1 # bootmenu *** U-Boot Boot Menu *** update rootfs.rw update rootfs.ro update fwk update kernel.images update uboot update esbc reboot uboot update fwk.squashfs U-Boot console Press UP/DOWN to move, ENTER to select, ESC/CTRL+C to quit hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full Using pie device TFTP from server 192.168.0.10; our IP address is 192.168.0.1 Filename 'hi_esbc.bin'. Load address: 0x86000000 Loading: ########### 6.6 MiB/s done Bytes transferred = 55420 (d87c hex) Erasing 0x00000000 ... 0x0007ffff (4 eraseblock(s)) Writing 55420 byte(s) at offset 0x00000000 Size not on a page boundary (0x800), rounding to 0xe000 /* uboot */ tiangong1 # *** U-Boot Boot Menu *** update rootfs.rw update rootfs.ro update fwk update kernel.images update uboot update esbc reboot uboot update fwk.squashfs U-Boot console Press UP/DOWN to move, ENTER to select, ESC/CTRL+C to quit hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full Using pie device TFTP from server 192.168.0.10; our IP address is 192.168.0.1 Filename 'hi_uboot.bin'. Load address: 0x86000000 Loading: ################################################################# ################################ 7.8 MiB/s done Bytes transferred = 495892 (79114 hex) Erasing 0x00000000 ... 0x000fffff (8 eraseblock(s)) Writing 495892 byte(s) at offset 0x00000000 Size not on a page boundary (0x800), rounding to 0x79800 Erasing 0x00000000 ... 0x000fffff (8 eraseblock(s)) Writing 495892 byte(s) at offset 0x00000000 Size not on a page boundary (0x800), rounding to 0x79800 /* reset */ tiangong1 # re resetting ... reset_cpu hi-esbc start spi hw init succ �un�� hit succ U-Boot 2022.07 (Aug 25 2025 - 19:01:33 +0800) for tiangong1 Watchdog enabled DRAM: 224 MiB Core: 140 devices, 17 uclasses, devicetree: separate NAND: device found, Manufacturer ID: 0xc8, Chip ID: 0x92 GigaDevice GD5F2GM7UEYIGR GigaDevice GD5F2GM7UEYIGR 256 MiB, MLC, erase size: 128 KiB, page size: 2048, OOB size: 128 256 MiB Loading Environment from NAND... Scanning device for bad blocks Bad eraseblock 462 at 0x0000039c0000 *** Warning - bad CRC, using default environment In: uart1@10119000 Out: uart1@10119000 Err: uart1@10119000 invalid bootflag, using default Saving Environment to NAND... Erasing redundant NAND... Erasing at 0x360000 -- 100% complete. Writing to redundant NAND... OK OK Reset Info: Uboot reset cmd to reset Net: lsw_dp lsw_dp: lsw_dp probe succ lsw_pfe lsw_pfe: lsw_pfe probe succ hsan_mac gemac0@0: gemac0@0 probe succ mdio_bus mdio0@0: mdio_register mdio0@0 mdio_bus mdio0@0: mdio0@0 probe succ Genius Phy hwVer:0x20669a22 fwVer:0x6e01 hsan_mac gemac1@1: gemac1@1 probe succ hsan_mac gemac2@2: gemac2@2 probe succ hsan_mac gemac3@3: gemac3@3 probe succ hsan_mac gemac@8: gemac@8 probe succ mdio_bus mdio1@1: mdio_register mdio1@1 mdio_bus mdio1@1: mdio1@1 probe succ Could not get PHY for mdio1@1: addr 1 hsan_mac gemac@8: gemac@8 no phy device hsan_pie pie: pie probe succ Warning: pie (eth0) using random MAC address - 96:a1:cb:b9:1c:36 eth0: pie bootflag a bootreg 10 hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full multiupg detect bootdelay is 3000 Hit any key to stop autoboot: 0 /* uboot */ tiangong1 # bootmenu *** U-Boot Boot Menu *** update rootfs.rw update rootfs.ro update fwk update kernel.images update uboot update esbc reboot uboot update fwk.squashfs U-Boot console Press UP/DOWN to move, ENTER to select, ESC/CTRL+C to quit hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full Using pie device TFTP from server 192.168.0.10; our IP address is 192.168.0.1 Filename 'hi_uboot.bin'. Load address: 0x86000000 Loading: ################################################################# ################################ 7.3 MiB/s done Bytes transferred = 495892 (79114 hex) Erasing 0x00000000 ... 0x000fffff (8 eraseblock(s)) Writing 495892 byte(s) at offset 0x00000000 Size not on a page boundary (0x800), rounding to 0x79800 Erasing 0x00000000 ... 0x000fffff (8 eraseblock(s)) Writing 495892 byte(s) at offset 0x00000000 Size not on a page boundary (0x800), rounding to 0x79800 /* reset */ tiangong1 # re resetting ... reset_cpu hi-esbc start spi hw init succ hi-esbc start fail 70000000 hi-esbc start spi hw init succ hi-esbc start fail 70000000 hi-esbc start spi hw init succ �i ��pihi-esbc start fail 70000000 hi-esbc start spi hw init succ 以上两个报错是一样的吗？如果一样，告诉我可能的原因
最新发布
09-02
[err] ECC error in page_addr: 0x80000, flash_status 00 nand read fail at 0x%08x Nand read from offset 0x80000 failed 1879048192 ``` - 这说明 NAND Flash 在指定地址读取时出现了 **数据校验失败**，...
hi-esbc start spi hw init succ �ol��0_it succ U-Boot 2022.07 (Aug 25 2025 - 19:01:33 +0800) for tiangong1 Watchdog enabled DRAM: 224 MiB �hi-esbc start spi hw init succ �ia��0_it succ U-Boot 2022.07 (Aug 25 2025 - 19:01:33 +0800) for tiangong1 Watchdog enabled DRAM: 224 MiB Core: 140 devices, 17 uclasses, devicetree: separate NAND: device found, Manufacturer ID: 0xc8, Chip ID: 0x92 GigaDevice GD5F2GM7UEYIGR GigaDevice GD5F2GM7UEYIGR 256 MiB, MLC, erase size: 128 KiB, page size: 2048, OOB size: 128 256 MiB Loading Environment from NAND... Scanning device for bad blocks OK In: uart1@10119000 Out: uart1@10119000 Err: uart1@10119000 bootflag verify succ Hard Power-on reset for internal POR circuit timing Net: lsw_dp lsw_dp: lsw_dp probe succ lsw_pfe lsw_pfe: lsw_pfe probe succ hsan_mac gemac0@0: gemac0@0 probe succ mdio_bus mdio0@0: mdio_register mdio0@0 mdio_bus mdio0@0: mdio0@0 probe succ Genius Phy hwVer:0x20669a22 fwVer:0x6e01 hsan_mac gemac1@1: gemac1@1 probe succ hsan_mac gemac2@2: gemac2@2 probe succ hsan_mac gemac3@3: gemac3@3 probe succ hsan_mac gemac@8: gemac@8 probe succ mdio_bus mdio1@1: mdio_register mdio1@1 mdio_bus mdio1@1: mdio1@1 probe succ Could not get PHY for mdio1@1: addr 1 hsan_mac gemac@8: gemac@8 no phy device hsan_pie pie: pie probe succ Warning: pie (eth0) using random MAC address - ba:03:a1:16:5c:0c eth0: pie bootflag a bootreg 0 bootreg init, set 10 hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full multiupg detect bootdelay is 3000 Hit any key to stop autoboot: 0 tiangong1 # tiangong1 # bootmenu *** U-Boot Boot Menu *** update rootfs.rw update rootfs.ro update fwk update kernel.images update uboot update esbc reboot uboot update fwk.squashfs U-Boot console Press UP/DOWN to move, ENTER to select, ESC/CTRL+C to quit hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full Using pie device TFTP from server 192.168.0.10; our IP address is 192.168.0.1 Filename 'hi_esbc.bin'. Load address: 0x86000000 Loading: ################ 6.7 MiB/s done Bytes transferred = 77004 (12ccc hex) Erasing 0x00000000 ... 0x0007ffff (4 eraseblock(s)) Writing 77004 byte(s) at offset 0x00000000 Size not on a page boundary (0x800), rounding to 0x13000 /* 擦除 */ tiangong1 # nand erase.chip NAND erase.chip: device 0 whole chip Erasing at 0xffe0000 -- 100% complete. OK /* eabc */ tiangong1 # bootmenu *** U-Boot Boot Menu *** update rootfs.rw update rootfs.ro update fwk update kernel.images update uboot update esbc reboot uboot update fwk.squashfs U-Boot console Press UP/DOWN to move, ENTER to select, ESC/CTRL+C to quit hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full Using pie device TFTP from server 192.168.0.10; our IP address is 192.168.0.1 Filename 'hi_esbc.bin'. Load address: 0x86000000 Loading: ################ 6.7 MiB/s done Bytes transferred = 77004 (12ccc hex) Erasing 0x00000000 ... 0x0007ffff (4 eraseblock(s)) Writing 77004 byte(s) at offset 0x00000000 Size not on a page boundary (0x800), rounding to 0x13000 /* uboot.bin */ tiangong1 # *** U-Boot Boot Menu *** update rootfs.rw update rootfs.ro update fwk update kernel.images update uboot update esbc reboot uboot update fwk.squashfs U-Boot console Press UP/DOWN to move, ENTER to select, ESC/CTRL+C to quit hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full Using pie device TFTP from server 192.168.0.10; our IP address is 192.168.0.1 Filename 'hi_uboot.bin'. Load address: 0x86000000 Loading: ################################################################# ################################ 7.9 MiB/s done Bytes transferred = 495132 (78e1c hex) Erasing 0x00000000 ... 0x000fffff (8 eraseblock(s)) Writing 495132 byte(s) at offset 0x00000000 Size not on a page boundary (0x800), rounding to 0x79000 Erasing 0x00000000 ... 0x000fffff (8 eraseblock(s)) Writing 495132 byte(s) at offset 0x00000000 Size not on a page boundary (0x800), rounding to 0x79000 /* reset */ tiangong1 # re resetting ... reset_cpu hi-esbc start boot_info.value a0000..... boot mode 2...... match board TG1C0D8_TYPE1, board_id_val 412121 sec init spi hw init succ �up��0_ boot_info.value a0000..... flash boot mode ...... hi_nand_probe...... Nand Spec : Block[20000B] Page[800B] OOB[40B] page_shift[0b] read_addr_cycle[05] read_if_type[00] read_dummy_num[01] read_cmd[03] uboot_region_size [100000]...... This boot is main region 0 area...... nand read oob: offset 0x80000 nand read: offset 0x80000 size 0x1000 to addr 0x17512cd0 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x81000 size 0x100 to addr 0x17513cd0 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x81100 size 0x1bf0 to addr 0x17513dd0 normal boot...... no secure boot, dont check sign...... no secure boot, dont check code image..... start ddrinit from addr 17513dd0 ddrinit finish This boot is main region 0 area...... nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x82cf0 size 0x1000 to addr 0x80100f00 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x83cf0 size 0x100 to addr 0x80101f00 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read oob: offset 0xa0000 nand read oob: offset 0xc0000 nand read oob: offset 0xe0000 nand read: offset 0x83df0 size 0x7502c to addr 0x80102000 dont decrypt boot code...... no secure boot, dont check sign...... no secure boot, dont check code image..... check nvcnt...... check version start...... There is no version in efuse dice not support...... subkey_id = 0x00 esbc_mask = 0x01 bl_nvcnt = 0x01 start to uboot...... U-Boot 2022.07 (Aug 28 2025 - 11:08:19 +0800) for tiangong1 Watchdog enabled DRAM: 224 MiB Core: 139 devices, 17 uclasses, devicetree: separate NAND: device found, Manufacturer ID: 0xc8, Chip ID: 0x92 GigaDevice GD5F2GM7UEYIGR GigaDevice GD5F2GM7UEYIGR 256 MiB, MLC, erase size: 128 KiB, page size: 2048, OOB size: 128 256 MiB Loading Environment from NAND... Scanning device for bad blocks *** Warning - bad CRC, using default environment In: uart1@10119000 Out: uart1@10119000 Err: uart1@10119000 invalid bootflag, using default Saving Environment to NAND... Erasing redundant NAND... Erasing at 0x360000 -- 100% complete. Writing to redundant NAND... OK OK Reset Info: Uboot reset cmd to reset Net: lsw_dp lsw_dp: lsw_dp probe succ lsw_pfe lsw_pfe: get reset bulk failed lsw_pfe lsw_pfe: lsw_pfe probe succ hsan_mac gemac0@0: gemac0@0 probe succ mdio_bus mdio0@0: mdio_register mdio0@0 mdio_bus mdio0@0: mdio0@0 probe succ Genius Phy hwVer:0x20669a22 fwVer:0x6e01 hsan_mac gemac1@1: gemac1@1 probe succ hsan_mac gemac2@2: gemac2@2 probe succ hsan_mac gemac3@3: gemac3@3 probe succ hsan_mac gemac@8: gemac@8 probe succ mdio_bus mdio1@1: mdio_register mdio1@1 mdio_bus mdio1@1: mdio1@1 probe succ Could not get PHY for mdio1@1: addr 1 hsan_mac gemac@8: gemac@8 no phy device hsan_pie pie: pie probe succ Warning: pie (eth0) using random MAC address - 5a:60:6c:f7:b9:c3 eth0: pie bootflag a bootreg 10 hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full multiupg detect bootdelay is 3000 Hit any key to stop autoboot: 0 /* uboot */ tiangong1 # bootmenu *** U-Boot Boot Menu *** update rootfs.rw update rootfs.ro update fwk update kernel.images update uboot update esbc reboot uboot update fwk.squashfs U-Boot console Press UP/DOWN to move, ENTER to select, ESC/CTRL+C to quit hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full Using pie device TFTP from server 192.168.0.10; our IP address is 192.168.0.1 Filename 'hi_uboot.bin'. Load address: 0x86000000 Loading: ################################################################# ################################ 7.7 MiB/s done Bytes transferred = 495132 (78e1c hex) Erasing 0x00000000 ... 0x000fffff (8 eraseblock(s)) Writing 495132 byte(s) at offset 0x00000000 Size not on a page boundary (0x800), rounding to 0x79000 Erasing 0x00000000 ... 0x000fffff (8 eraseblock(s)) Writing 495132 byte(s) at offset 0x00000000 Size not on a page boundary (0x800), rounding to 0x79000 /* reset */ tiangong1 # re resetting ... reset_cpu hi-esbc start boot_info.value a0000..... boot mode 2...... match board TG1C0D8_TYPE1, board_id_val 412121 sec init spi hw init succ �oo��0_ boot_info.value a0000..... flash boot mode ...... hi_nand_probe...... Nand Spec : Block[20000B] Page[800B] OOB[40B] page_shift[0b] read_addr_cycle[05] read_if_type[00] read_dummy_num[01] read_cmd[03] uboot_region_size [100000]...... This boot is main region 0 area...... nand read oob: offset 0x80000 nand read: offset 0x80000 size 0x1000 to addr 0x17512cd0 [err] ECC error in page_addr: 0x80000, flash_status 00 nand read fail at 0x%08x Nand read from offset 0x80000 failed 1879048192 flash read ddrinit head [80000] fail...... flash boot fail...... hi-esbc start fail 70000000 hi-esbc start boot_info.value a0000..... boot mode 2...... match board TG1C0D8_TYPE1, board_id_val 412121 sec init spi hw init succ �e ��0_ boot_info.value a0000..... flash boot mode ...... hi_nand_probe...... Nand Spec : Block[20000B] Page[800B] OOB[40B] page_shift[0b] read_addr_cycle[05] read_if_type[00] read_dummy_num[01] read_cmd[03] uboot_region_size [100000]...... This boot is standby region 0 area...... nand read oob: offset 0x180000 nand read: offset 0x180000 size 0x1000 to addr 0x17512cd0 [err] ECC error in page_addr: 0x180000, flash_status 00 nand read fail at 0x%08x Nand read from offset 0x180000 failed 1879048192 flash read ddrinit head [180000] fail...... flash boot fail...... hi-esbc start fail 70000000 hi-esbc start boot_info.value a0000..... boot mode 2...... match board TG1C0D8_TYPE1, board_id_val 412121 sec init spi hw init succ �e ��0_ boot_info.value a0000..... flash boot mode ...... hi_nand_probe...... Nand Spec : Block[20000B] Page[800B] OOB[40B] page_shift[0b] read_addr_cycle[05] read_if_type[00] read_dummy_num[01] read_cmd[03] uboot_region_size [100000]...... This boot is main region 0 area...... nand read oob: offset 0x80000 nand read: offset 0x80000 size 0x1000 to addr 0x17512cd0 [err] ECC error in page_addr: 0x80000, flash_status 00 nand read fail at 0x%08x Nand read from offset 0x80000 failed 1879048192 flash read ddrinit head [80000] fail...... flash boot fail...... hi-esbc start fail 70000000 最后的报错是什么？分析一下
08-31
[err] ECC error in page_addr: 0x80000, flash_status 00 nand read fail at 0x%08x Nand read from offset 0x80000 failed 1879048192 flash read ddrinit head [80000] fail...... flash boot fail...... hi-...
Hyper-v 新建 Windows 虚拟机卡在“Press any key to boot from CD or DVD...，无法按下任何按键
学不会shader
04-16 3877
Hyper-v 新建 Windows 虚拟机卡在“Press any key to boot from CD or DVD...，无法按下任何按键
press any key to boot from usb 解决方案
石头哥的博客
12-09 9711
Rufus安装Win7操作系统出现“press any key to boot from usb”解决方案 https://www.intowindows.com/how-to-add-press-any-key-to-boot-from-usb-to-bootable-windows-usb/
TrueNAS安装Windows虚拟机卡在“Press any key to boot from CD or DVD...”的解决办法
Kun_ye
06-02 6288
TrueNAS安装Windows虚拟机卡在“Press any key to boot from CD or DVD...”的解决办法问题描述解决方法 问题描述 在TrueNAS中安装虚拟机，添加CDROM并挂载ISO镜像，启动后因为连接VNC需要时间所以没办法在倒计时前按键从而从光盘启动安装系统。故障如图： 解决方法 出现上图后不要动，等待一会儿，会进入UEFI Interactive Shell （如下图） 输入：exit,回车确认后会进入BIOS界面 选择“Boot Manager” 选
win10 下 安装 vm报错
tuyf_hs的专栏
09-10 1126
解决办法：： 经实验均不能解决问题，最后我搜索注册表删除所有带vmware的项和键。问题解决 问题场景： 安装虚拟机时出现failed to create the requested registry key 2010-11-27 23:10raymondzr | 浏览 14316 次 安装虚拟机时出现failed to create
Vm14 中安装mac时出现如图情况是怎么回事？
weixin_41921096的博客
03-30 933
关于VM14中安装win 10遇到的小问题
Jaychouzzk
05-22 5475
在vm 14 中安装系统时若出现以下界面时在vmware中打开虚拟系统,见到Press any key to boot from CD or DVD.后按ESC键即可进行安装。
Linux系统安装教程之一：VM14虚拟机+Ubuntu16安装
havefun00的博客
10-23 8458
本次教程主要是在Win10系统下安装VM14虚拟机，以及在虚拟机上安装Ubuntu16.04系统。 下面开始介绍安装步骤： 1、首先安装VM14虚拟机软件，具体过程这里不再介绍 VM14下载地址：链接: https://pan.baidu.com/s/1bpGr9Ob 密码: hvcx 2、安装VM14后，打开软件 点击创建虚拟机，开始安装Ubuntu16.4系统
（作死系列1）Non-System disk or disk error
cl20110929的博客
12-20 4278
起因因为有两个系统，所以想删除另一个无用系统，然后就开始作死了== 作死的认为格式化失败是因为D盘是活动分区，所以格式化失败 取消将磁盘分区标为活动的: 取消的时候只能有命令行，因为windows界面的那个选项卡已经变为浅色的不可以勾选了。 1.命令行提示符，运行DISKPART，运行入提示符变成”DISKPART>”; 2.使用”LIST DISK”命令确定你的移动硬盘的##号;
No boot device found Press any key to reboot the machine
07-05
### 三级标题：问题分析 计算机启动时出现 **"No boot device found"** 错误通常表明系统无法找到可引导的设备。这可能是由于多种原因导致的，包括硬件故障、BIOS/UEFI设置错误或引导分区损坏。 1. **检查硬件连接** 确保硬盘或SSD正确连接到主板上的SATA端口，并且电源线也牢固连接[^2]。 2. **检查BIOS/UEFI设置** 进入BIOS/UEFI设置界面（通常通过开机时按Del、F2或其他指定键），确认硬盘被正确识别。如果未被识别，可能需要重新插拔硬盘或者更换SATA端口[^2]。 3. **修复引导记录** 如果硬盘被正确识别但仍然无法启动，可以尝试使用Live CD/USB进入救援模式并修复引导记录。对于使用GRUB作为引导程序的Linux系统，可以通过以下命令来重新安装GRUB： ```bash sudo grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=GRUB sudo update-grub ``` 其中`/boot/efi`是EFI系统分区挂载点，根据实际情况调整[^2]。 4. **检查EFI变量空间** 在某些情况下，EFI变量空间可能已满，导致无法更新引导项。此时可以尝试清除无效的EFI变量： ```bash sudo mount -t efivarfs efivarfs /sys/firmware/efi/efivars sudo rm /sys/firmware/efi/efivars/dump-* ``` 清除后再次尝试更新GRUB配置[^2]。 5. **检查文件系统完整性** 文件系统的损坏也可能导致引导失败。可以使用`fsck`工具检查和修复文件系统错误： ```bash sudo fsck /dev/sda1 # 替换为实际的根分区设备名 ``` 6. **恢复默认BIOS设置** 如果以上方法均无效，可以尝试将BIOS/UEFI恢复到出厂默认设置，然后再进行必要的调整[^2]。 7. **检查操作系统安装** 最后，确保操作系统本身没有损坏。如果上述步骤都无法解决问题，可能需要考虑重新安装操作系统。 ###
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
红包 添加红包
表情包 插入表情
表情包 代码片
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值