APP-PER-50022: Oracle Human Resources could not retrieve a value

本文介绍了解决在创建Organization或Position时遇到的APP-PER-50022错误的方法。通过修改系统Profile“HR:UserType”并设置HR User来解决此问题。若无法直接修改,则可通过特定步骤使系统管理员能够进行可见性和可编辑性的设置。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

创建organization或Position时,遇到如下错误:

APP-PER-50022: Oracle Human Resources could not retrieve a value for the User Type profile option.
Please ensure it is set properly fro your responsibility.

解决办法:修改系统Profile "HR:User Type",设置HR User。
如果系统不让修改,则参考以下:

APP-PER-50022: Oracle Human Resources could not retrieve a value
for the User Type profile option. Please ensure it is set properly for your
responsibility.

the System Administrator may need to set the profile if the user does note have the responsibility.

Set the profile option, HR:User Type, to be updateable at the site, application, responsibility or user level so that a value can be entered.
This can be accomplished by the following steps:
Sign on to Oracle Applications
Switch responsibility to Application developer
Go to Profiles
Query--&gtFind, Type %HR% in the lov
Choose HR:User Type
Set the System administrator access to visible and updateable
7434747_201005011146471.jpg
 
 

fj.pngHR User Type.JPG

来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/7434747/viewspace-661748/,如需转载,请注明出处,否则将追究法律责任。

转载于:http://blog.itpub.net/7434747/viewspace-661748/

### 解决方案 当遇到 `Could not resolve host` 错误时,通常是因为 DNS 配置不正确或者网络连接存在问题。以下是针对该问题的具体解决方案: #### 1. 检查 DNS 配置 确保系统的 `/etc/resolv.conf` 文件中有有效的 DNS 地址。可以尝试替换为公共 DNS 服务器地址,例如 Google 的 DNS 或阿里云的 DNS。 ```bash nameserver 8.8.8.8 nameserver 8.8.4.4 ``` 如果需要使用国内更快的 DNS,可以选择阿里云的 DNS: ```bash nameserver 223.5.5.5 nameserver 223.6.6.6 ``` 完成修改后保存文件并测试 DNS 是否正常工作[^1]。 --- #### 2. 替换 CentOS 默认镜像源 由于默认的 CentOS 镜像可能不可用或被移除,建议更换为更稳定的第三方镜像源(如网易、阿里云等)。以下是具体操作步骤: ##### (1)备份原始仓库配置文件 ```bash sudo mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup ``` ##### (2)下载新的镜像源配置文件 以网易源为例: ```bash sudo wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.163.com/.help/CentOS7-Base-163.repo ``` 如果是阿里云源,则执行以下命令: ```bash sudo wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo ``` ##### (3)清理缓存并重建索引 ```bash sudo yum clean all sudo yum makecache ``` 通过上述步骤可有效解决因镜像失效引起的依赖问题[^3]。 --- #### 3. 手动指定更新源 对于特定软件包(如 `rsync`),可以直接手动指定可用的更新源来安装。例如: ```bash yum --disablerepo="*" --enablerepo=base,extras update yum install rsync -y ``` 此方法适用于部分自定义环境下的临时修复需求。 --- #### 4. 安装 Chrony 并同步时间服务 有时时间不同步也会导致 SSL/TLS 握手失败等问题,进而影响到 YUM 软件包管理工具的功能。可以通过安装和配置 Chrony 来保持系统时间一致性[^2]。 ##### (1)安装 Chrony ```bash yum install -y chrony ``` ##### (2)编辑配置文件 打开 `/etc/chrony.conf` 文件,添加如下内容: ```plaintext server ntp1.alyun.com iburst server ntp2.alyun.com iburst server ntp3.alyun.com iburst ``` ##### (3)启动并设置开机自启 ```bash systemctl start chronyd systemctl enable chronyd ``` 验证时间同步状态: ```bash chronyc sources -v ``` --- #### 5. 测试网络连通性 最后确认目标主机是否能够访问外部资源。可以运行以下命令检测网络状况: ```bash ping updates.atomicorp.com curl -I https://updates.atomicorp.com/ ``` 如果仍然无法解析域名,可能是防火墙规则阻止了流量传输。检查 SELinux 和 iptables 设置: ```bash getenforce iptables -L ``` 必要时关闭 SELinux 或调整其策略模式: ```bash setenforce 0 sed -i 's/^SELINUX=enforcing$/SELINUX=permissive/' /etc/selinux/config ``` --- ### 总结 综合以上措施,应能彻底解决 `Could not resolve host` 及相关联的问题。若仍有异常情况发生,请进一步排查本地网络环境以及上游代理配置是否存在干扰因素。 ---
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值