java 数组中求最值

PySide6多线程避坑大全:信号槽崩溃、内存泄漏,这些雷我都帮你踩过了 本文深入探讨了PySide6多线程开发中的常见问题与解决方案,包括信号槽崩溃、内存泄漏等典型陷阱。通过实战案例和优化策略,帮助开发者避免UI线程操作错误、有效管理资源生命周期,并提升跨线程通信的可靠性。特别针对PySide6多线程特性,提供了线程安全日志、死锁检测等实用调试技巧。 阅读详情

java中数组求最值,这在实际的开发中几乎用不到,但是在面试中会偶尔被问到,这是考你基本的思维能力,现在说下这个题的基本思路


思路:

1:先定义一个变量,一般是用数组的第一个值 

2:在循环中判断(从第二个角标到数组的length-1角标对应的值)是否大于这个之前定义的值,如果大于那么就把这个值赋值给max,直到比完就可以求出最大值


代码如下:

public static void main(String[] args) {
			int[] arr = {1,3,5,6,9,7};
			int max = arr[0];
			for(int i=1;i<arr.length;i++){
				if(arr[i]>max){
					max = arr[i];
				}
			}
		}


VMware16虚拟机:下载和安装教程 VMware16 虚拟机 下载和安装教程 阅读详情

相关推荐

PHY6252开发实战:从零构建BLE串口透传应用

本文详细介绍了PHY6252开发板在BLE串口透传应用中的实战经验,包括开发环境搭建、BLE串口透传例程解析、AT指令集实现与扩展、数据透传机制优化以及常见问题排查指南。通过智能家居遥控器项目案例,展示了PHY6252在低功耗物联网设备开发中的实际应用。

weixin_29183637的博客 311

java快速寻找一个数组的最大值或最小值, min, max,三种方法

java 中 寻找一个数组中的最大值或最小,除了自己专门编写一个 min 或 max 函数外,还有几种方式方便使用。 1. 使用 stream 将一个数组放进 stream 里面,然后直接调用 stream 里的 min 或 max 函数得到最大值或最小值。 2. 使用 collection 将数组转化为对象数组,即 int 转化为 Integer (需要使用 toO...

weixin_30394669的博客 8877

DAP-Link DIY复刻指南

DAP-Link是ARM开源的一个项目,主要用于代码下载以及调试,支持SWD和JTAG调试接口,对于开发嵌入式的同学相信都或多或少有所耳闻。除了DAP-Link之外还有很多同类型的调试器,如ST-LinkJ-Link,但是这些都是不开源的,无法复刻或进行二次开发。但DAP-Link不同,完全开源,不用担心侵权问题,且随着开源社区大家的共同努力,DAP-Link经过了不断的迭代,先如今已取代ARM之前推出的CMSIS-DAP开源项目。

爱出名的狗腿子 1万+

java基础:求数组的最值

·java基础:求数组的最值 方法一:顺序查找 方法二:使用冒泡排序的方法 方法三:通过`java.util.Arrays`类的工具方法间接实现

weixin_63279307的博客 2818

R以及Rstudio超详细安装教程(包括安装过程中出现的问题)

R安装及Rstudio安装,以及安装中出现的问题

2301_76908257的博客 1万+

【电子元件篇】电容的九大作用与选型指南-超简单解读

本文系统介绍了电容的基础概念、核心功能及实际应用。电容作为存储电荷的被动元件,其容值公式为C=Q/V,单位包括法拉及常用派生单位。文章重点解析了电容的九大功能:滤波(通过RC低通电路抑制噪声)、耦合(传递交流隔离直流)、去耦(稳定供电)、储能(短暂供电)、定时(RC延时)、谐振(RLC振荡)、旁路(高频通路)、电压调节(DC-DC转换)以及保护(吸收浪涌)。同时详细阐述了电容分类(陶瓷/电解/薄膜等)、参数选型要点(耐压/容值/精度/温度)及PCB设计注意事项,并针对不同应用场景提供了具体选型建议和常见误区

2301_81299416的博客 4004

java如何取最大值

【代码】java如何取最大值。

lxt185794853的博客 3064

GoPro官方API实战:从蓝牙配对到Wi-Fi流媒体,构建跨平台控制应用

本文详细解析了GoPro官方API的开发实践,涵盖蓝牙配对、Wi-Fi流媒体控制等关键技术。通过实战案例,指导开发者如何构建跨平台控制应用,解决设备发现、指令解析、视频流传输等核心问题,并分享Android平台迁移经验与常见问题排查方法。

weixin_30727835的博客 397

java 数组找最大值

在 Java 中,可以使用以下方法来找到数组中的最大值: 使用循环:通过遍历数组中的每一个元素,并将当前元素与当前最大值进行比较,如果当前元素比当前最大值更大,则更新当前最大值。 使用 Java 8 Stream API:可以使用 Stream API 对数组中的元素进行操作,并使用 max 方法找到最大值。 以下是使用循环找到数组中最大值的代码示例: int[] arr = {1, 2,...

weixin_42601134的博客 6266

静态时序分析(STA)_深入解析Data to Data Checks的零周期挑战

本文深入解析了静态时序分析(STA)中Data to Data Checks的核心概念与零周期挑战。重点探讨了当Setup要求值超过时钟周期时,工具如何调整发射沿,并导致Hold检查的发射与捕获沿“分裂”这一反直觉现象。文章通过案例详细解读了时序报告,并提供了通过调整约束或接受多周期保持两种策略来应对这一挑战,帮助工程师正确理解和处理此类复杂时序检查。

weixin_29204205的博客 349

auboi5 + d435i 使用easy handeye进行标定时,遇到相关问题记录。

解决办法:在easy_handeye默认的 calibrate.launch 文件中move group 的默认值为 "manipulator",但针对每个人的机械臂,这个值需要更改。以aubo_i5为例,需要将其改为"manipulator_i5",或者自己编写launch文件时,传入参数move group的值,便能顺利解决问题!easy_handeye_calibration_server 进程出现崩溃。

weixin_61025092的博客 958

【取最大值的三种方式】

本文介绍了三种常用的方法来获取Java列表中的最大值。需要注意的是,max()方法返回一个Optional对象,因为列表可能为空,所以需要先判断是否存在最大值。本文将介绍如何使用不同的方法来取得列表中的最大值,并给出相关的代码示例。这段代码先将列表的第一个元素设为最大值,然后从第二个元素开始遍历,逐个比较,如果发现有更大的值,则更新最大值。最简单的方法是使用循环遍历列表,逐个比较元素的大小,并记录最大值。这段代码直接调用Collections.max()方法,将列表作为参数传入,即可获取到列表中的最大值。

Leoon123的博客 8856

【路径规划】Theta_star算法机器人栅格地图最短路径规划【含Matlab源码 2618期】

Theta_star算法机器人栅格地图最短路径规划 完整的代码,方可运行;可提供运行操作视频!适合小白!

订阅付费专栏Matlab(奶茶价版),可赠送奶茶价版付费专栏指定代码1份; 362

java两种方法求数组最值

/* * 两种方法求数组最值 */ public class MaxArrayTest { /* * 取出数组中最大的数 * 思路: * 包装成一个方法 * 定义一个变量Max与数组中的数据比较 * 遍历数组比较大的数据放在Max中(为了输出负数,循环中定义变量时初始化为数组值) */ public static void main(String[...

一名北漂Java程序员的学习记录! 1722

android 蓝牙通讯demo

android 下蓝牙通讯demo,实现了发现蓝牙,使能蓝牙,通过蓝牙发送消息。

Statistics and Machine Learning Toolbox

Statistics and Machine Learning Toolbox(带书签),MATLAB统计学习工具

JAVA——数组遍历,排序,求最值

Java数组中的常见操作 1,数组遍历 2,数组求最值 3,数组排序 (一)数组遍历 public class Array{ public static void main(String[] args){ //定义数组 int[] arr = new int[]{1,2,3,4}; //使用for循环遍历 for(int i = 0;i &amp;amp;amp;amp;amp;amp;lt; ar...

范玖久的博客 860

visio安装包

Microsoft Office Visio 是一款专业的制图软件。利用经过更新的形状、协作工具和数据链接图表,创建专业级图表以简化复杂的信息。

java中数组的,求最值,拆入,删除。

java中数组的,求最值,拆入,删除。 /** * * @param arr 数组 * @return 返回最大值 终止方法的作用,return之后的语句不再执行 */ public static int getMaxElement(int[] arr) { if(arr==null) { System.err.println("数组为null,返回...

HadwinLing 309

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

908. 最小差值 I( 数学规律 + 数组求最值 )( Java8新特性 StreamAPI )

👍点赞 ⭐收藏 📝留言 一键三连 关注 Listen 不迷路

「Inspire Creativity, Enrich Life」 542

java中数组求最值

适合初学者学习的关于如何利用数组求最值

2301_76631443的博客 327

java-数组求最值 1

System.out.println("最小值:" + arr[0] + ", 最大值:" + arr[arr.length - 1]);这种方法的时间复杂度为 O(log n),但在数组未排序时,需要先对数组进行排序,排序的时间复杂度为 O(n log n)。这种方法的时间复杂度为 O(n),其中 n 是数组的长度。这种方法的时间复杂度为 O(n log n),因为排序算法通常是 O(n log n) 的。暴力法是最直接的方法,遍历数组中的每一个元素,不断更新最大值和最小值。### 3. 排序法。

weixin_41247813的博客 358

java 如何 数组中求最值;

顾名思义想要求数组的最值,首先要有一组数组,求最值的话,直接来一组for循环遍历数组;首先你要比较最值的话.首先要定义一个数组里面的一个索引值,然后根据这个值跟其他值进行比较,进行循环一圈,最后的值就是最值,看下图代码所示: ##数组

weixin_56199659的博客 517

java基础--求数组中的最值

求数组中的最值 获取数组中的最大值: 定义好一个数组,对数组元素进行静态初始化。 先选一个参照物,并数组第一个元素值赋给参照物,默认他是最大值 遍历数组中其他的元素,以次和参照物比较,如果大就把值重新赋值给参照物 最后参照物里保存的就是最大值 同理最小值。 案例: package com.lcn.day05; public class ArrayDemo5 { /**

lcn_Lynn的博客 776

Java 数组求最值

Java 数组求最值

fightting2016的博客 426
上一篇: java中的数组
下一篇: java 使用LinkedList模拟一个堆栈或者队列数据结构
zhoushenxian
博客等级 码龄12年 453粉丝 549原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符  | 博主筛选后可见
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值