Wallys// DR6018 Support: QUECTEL RM500Q-GL&Support:QCN9074 WiFi 6E Card,

Wi-Fi6E路由器:OpenWRTIPQ6010with2.5GbpsEthernet&802.11axSupport
该产品基于QualcommAtherosIPQ6010四核处理器,支持Wi-Fi6(802.11ax)和2.5Gbps以太网端口。配置包括1GBDDR3L内存,32MBNOR和256MBNAND闪存,以及对各种无线标准的支持。WallysCommunications(Suzhou)Co.,Ltd.是一家在无线行业拥有超过15年经验的公司,提供高质量和性价比高的路由器板和无线网络卡。

Open WRT,IPQ6010,802.1lax,2x2 2.4G&5G,2.5Gbps Ethernet Port Support,Open WRTLink Here Get More Information :PRODUCTS_Wallys Communications (Suzhou ) Co., LTD (wallystech.com)

Feature:

Qualcomm-Atheros IPQ6010

Quad-core ARM 64bit A53 @1.8GHz Processor

1GB DDRL3L System Memory

32MB NOR Flash, 256MB NAND Flash

Supports Dynamic Frequency Selection (DFS)

2x2 On-board 2.4GHz radio, up to 573Mbps physical Data Rate

2x2 On-board 5GHz radio, up to 1201Mbps physical Data Rate

Support: QUECTEL RM500Q-GL

Support: QCN9074 WiFi 6E Card

Absolute Maximum Rating

Parameter Rating Unit

Supply Voltage 24V~48 V

Operating Temperature Range -40 to +70 ºC

Storage Temperature Range -45 to +105 ºC

Operating Humidity Range 5 to +95 (non-condensing) %

Hardware Specification

Symbol Parameter

CPU :Qualcomm-Atheros IPQ6010

CPU Frequency: Quad-core ARM 64 bit A53 @1.8 GHz processor

System Memory: 1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design

Ethernet Port: 1 x 1Gbps Ethernet Ports & POE3 x 1Gbps Ethernet Ports , 1x 2.5Gbps Ethernet Port

NGFF Slot: M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0

SD Card Slot: 1x SD Card Slot

USB /header: 1x USB 2.0 Port

POE: 24V~48V passive POE/Active POE(Suport 802.3bt)

DC :Jack 24V power supply

LED header: FFC/FPC Connector

Serial Port: 1x Serial Port 4 Pin Connector

Wireless: On-board 2x2 2.4GHz MU-MIMO OFDMA 802.11b/802.11g/802.11n/802.11ax, max 23dBm per chain On-board 2x2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax, max 20dBm per chain 4 x MMCX Connectors

Bluetooth: optional

Nor Flash :8-32MB(normally is 8MB)

Nand Flash: 256MB

DDR: 1GB

Dimension: 185mm x 116m

OUR CONPANY:

Wallys Communications (Suzhou ) Co., LTD Link :https://link.segmentfault.com

With over 15 years of experience in wireless industry and penetrating market olfaction, Wallys has designed and manufactured many high quality and cost-effective routerboards and wireless network cards.

In the complex market, Wallys products stand out and are affirmed by partners. From 802.11 a – ax, Wallys always keeps up with the most cutting-edge wireless technology, aimed to help customers take the preemptive opportunities to occupy the market and lead a win-win cooperation.

More detail and opportunities attach: sales4@wallystech.com. This is Jane for you .

为了使用 `aarch64-poky-linux-gcc` 交叉编译 `quectel-qmi-proxy.c` 并将输出文件保存到 `out` 目录,需要确保以下几点: 1. **工具链路径正确配置**:确保 `aarch64-poky-linux-gcc` 已安装并可通过环境变量访问,或者提供完整的工具链路径。 2. **指定输出目录**:使用 `-o` 参数指定生成的目标文件路径,将其放置在 `out` 目录中。 3. **系统根目录设置**:如引用所述,使用 `--sysroot` 指定交叉编译所需的系统根目录[^1]。 ### 编译命令示例 ```bash aarch64-poky-linux-gcc -o out/quectel-qmi-proxy quectel-qmi-proxy.c --sysroot=/opt/nxp-real-time-edge/2.1/sysroots/aarch64-poky-linux ``` 上述命令中: - `quectel-qmi-proxy.c` 是源文件; - `out/quectel-qmi-proxy` 是输出的可执行文件路径; - `--sysroot` 指定了交叉编译所需的系统根目录,以确保编译器能找到必要的头文件和库文件[^1]。 ### 清理目标文件 若要清理已生成的目标文件,可以使用简单的 `rm` 命令删除 `out` 目录中的对应文件: ```bash rm out/quectel-qmi-proxy ``` 如果希望实现更自动化的清理操作,可以编写一个简单的 `Makefile` 来管理构建与清理流程。 ### 示例 Makefile ```makefile CC = aarch64-poky-linux-gcc CFLAGS = --sysroot=/opt/nxp-real-time-edge/2.1/sysroots/aarch64-poky-linux OUT_DIR = out SRC = quectel-qmi-proxy.c TARGET = $(OUT_DIR)/quectel-qmi-proxy all: $(TARGET) $(TARGET): $(SRC) @mkdir -p $(OUT_DIR) $(CC) -o $@ $< $(CFLAGS) clean: rm -f $(TARGET) ``` 使用该 `Makefile` 后,只需运行以下命令即可完成编译和清理: ```bash make # 编译 make clean # 清理 ``` ### 注意事项 - 确保 `aarch64-poky-linux-gcc` 在系统路径中可用,或使用完整路径调用。 - 若遇到 `error: no such file or directory` 错误,请检查 `--sysroot` 路径是否正确,并确认交叉编译工具链已正确安装[^2]。
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
红包 添加红包
表情包 插入表情
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值