DAAE2008 Innovative Building Structures

「文智助手」全场景办公AI助理AI+OPC全流程实践方案(大赛作品) 阅读详情

DAAE2008 Innovative Building Structures

Semester 2, 2024

1.   Introduction

The aim of the unit is to engage students in studying innovative and advanced building structures, addressing topology, materials, and construction.  Topics include :

•    Architectural form. and structural function : review of basic structural systems (beam, truss, portal, arch, cable) and basic structural actions (compression, tension, bending, shear).

•    Introduction to advanced systems including grids, space frames, gridshells, cable nets and their surface structure equivalents including folded plates, shells, fabrics.

•    Innovative structural engineering in support of architecture, including examples from the work of well-known architects.

•    Structures in nature; biomimetics.

•    Structural materials both traditional and innovative.  Sustainability aspects of material choice, including embodied energy and carbon.

Week

Lesson and Lecture

Tutorial

1

1 Aug

Introductions and Basics - Loads, Supports, Tension, Compression, Bending, Shear

Everyday examples of structural actions

2

8 Aug

Types of 1-way structures - beams, portals, trusses

Come ready with :

- your draft of Assnt 1a for review and discussion

3

15 Aug

Types of 1-way structures - cables, arches.  Stability.

Come ready with :

- your draft of Assnt 1b

4

22 Aug

Model-making and testing

Come ready with :

- your draft of Assnt 1c

5

29 Aug

Role of structure in architecture

Come ready with :

- your draft of Assnt 1d

6

5 Sep

No lecture

Submit Assnt 1 for marking (by 10AM 5 Sep).  No tutorial.

7

12 Sep

Types of 2-way structures

Come ready with

- your draft of Assnt 2a

8

19 Sep

Shells and gridshells

Come ready with :

- your draft of Assnt 2b

9

26 Sep

Tension structures (cable nets)

Ditto Week 8

Break Week

10

10 Oct

Space frames and grids

Come ready with :

- your draft of Assnt 2c

11

17 Oct

TBA

Come ready with :

- your draft of Assnt 2d

12

24 Oct

No lecture

Submit Assnt 2 for marking (by 10AM

24 Oct).  No tutorial.

3.  Assessment Tasks

Assessment Item

Work Type

Weight

Due

Learning Outcomes Assessed

Assignment 1:

Report on 1-way

spanning structure.

Individual

50%

Week 6 : 10AM Thur 5 Sep

1,2,3,4,5,6,7

Assignment 2 :

Report on 2-way

spanning structure.

Individual

50%

Week 12 : 10AM Thur 24 Oct

1,2,3,4,6,7

The following are requirements of the course.  Penalties may apply for non-compliance.

- Attending the lectures

- Attending the tutorials

- Viewing the 5 Lessons in Canvas / Modules.    The Lessons work like an e-textbook.  They contain information necessary for addressing the two Assignments, so are required viewing.

Assignment 1 :   Report on 1-way structures.    Due Week 6     (10AM Thur 5 Sep)

Produce a report on 1-way spanning structures, covering items 1a,b,c,d below.  The items have

equal weighting.   For 1b,c,d you will be allocated a study building from the list of ‘Buildings with 1- way structures’ below.    While the ‘ Notes and Technical Articles’ in Canvas / Modules are a

primary source, you are encouraged to look for other sources too.    Present ideas in your own

words.   If you do use text directly from any of your sources, be sure to use quotation marks (“…”), and give the reference.

Submission:

An electronic report in pdf A4 landscape format with max file size 30MB, uploaded to Canvas / Assignments.   The intention is for the report to be easily readable on a typical laptop/desktop

screen without the need for magnifying or cross-page scrolling, and of a size easily handled for

downloading and opening.    If you prefer working in PowerPoint, use 4:3 slides converted to pdf.   Check your file size before uploading, and compress your images if you are over 30MB.   Average

report length will probably be around 20 pages (ie approx. 5 pages per item) including text, diagrams, photos, but will vary depending on your graphic style.

1a   Structural actions T,C,M in everyday structures

View Lesson 1 (Canvas / Modules).   Attend Lecture 1.   Review ‘Everyday Examples’ (Canvas / Modules / Week 1).   Then :

In or near your home, find five examples of simple everyday structures.   For each example provide a photo and a simple diagram showing :

- the underlying structure of the example you’ve chosen

- an external force that acts on the structure, and the corresponding reaction forces on the structure where it is supported

- the (exaggerated) deflected shape of the structure under these forces

- the resulting internal forces (T,C or M) in the members of the structure.

At least one of your examples should feature tension as an internal force.   See Everyday Examples.pdf in Canvas / Modules / Week 1 for sample solutions.

1b   Structural actions in a building structure

View Lessons 2 and 3 (Canvas / Modules).  Attend Lectures 2 and 3.   Read the Notes and Technical Article for your study building (Canvas / Modules / ‘Notes and Technical Articles’). Then using the suggestions in the Notes, provide answers to :

- Type.  What type is the roof structure of your study building - or if it is a hybrid, what types ?

Include a photo that shows something of the structure, and photos of two other buildings that share this structural roof type, with names, refs, and comments on why you think they share this type.

- Structural actions – under vertical loads like gravity.   How does the structure respond to a

downward point load near midspan of the roof ?   On a simple line diagram of the structure, show reactions needed from the ground, show the (exaggerated) deflected shape of the structure, and  structural elements that will experience T or C or M.

- Structural actions – under sideways loads like wind.   How does the structure respond to a

horizontal point load ?   Which elements of the structure will be mobilised in resisting the load (ie   what is the building’s ‘stability system’ , Lesson 3) ?    Show the (exaggerated) deflected shape of  the structure, and structural elements that will experience T or C or M (or S).   Consider both east- west and north-south directions.  If publications don’t mention the building’s stability system,

propose one yourself.

For complex structures your diagrams can be very simplified.    If the structure is repetitive, you only need to show a representative part, at least for downward load.

1c   Structural narrative

Provide answers to :

- Architectural intent and use of structure.  What do you think were the main architectural intentions behind the building’s design ?  (ie what was the architect hoping to achieve ?)    Try listing three.

Do you think the choice of structure supports these intentions ?      Why or why not?    If it is not

addressed in publications, make your own assessment of ‘architectural intention’ .    For this item, view Lesson 5 (Canvas / Modules), which discusses different types of architectural intent,

regarding both overall vision, and specific architectural functions.

- Jointing.  Choose a structural joint.  How do you think it was fabricated / constructed / assembled ?  (eg using what kind of fasteners or fixings, or what jointing processes ?).     Show on a diagram   the internal forces (T,C,M) arriving at the joint, that the joint will need to resist.   Your diagrams in   1b may offer a clue.

- Construction.  How was the structure constructed ?  (Briefly, using very simplified diagrams !).    If nothing is published, how would you construct it yourself ?  (eg  how much off-site prefabrication,   erected in parts of what size, in what sequence, with what kind of equipment, with any temporary    propping ?)

1d   2D structural model

View Lesson 4 (Canvas / Modules).   Attend Lectures 4, 5. Then :

Using materials like balsa, cardboard, string, glue, drawing pins, make a simple 2D model of the structure.  Your model can be upright, or flat on a table or board.   Provide :

- a photo of the model (no videos),

- a diagram (or a markup of a photo) showing which parts of the model experience T, C or M when you apply a downward point load near the midspan of the model.    Does this correspond to your

prediction in 1b ?

- repeat the experiment for a sideways point load to demonstrate how the structure is stabilised.

船载 OpenHarmony AIS 航海工作台:告警与防碰撞预警系统 船载OpenHarmony AIS航海工作台的告警与防碰撞系统,集成十余类告警(超速、偏航、会遇、SOS等),通过网格空间索引实现高效邻近判定,保障实时性。告警管理器统一调度规则、去重、通知与日志,支持悬浮球、语音、跑马灯、弹窗多渠道触达,确保航行安全。SOS紧急通道独立运行,避免干扰。系统设计强调性能优化与多场景适配,为航海安全提供核心支撑。 阅读详情

相关推荐

AI 应用开发:四维架构落地实战——以 HR Agent 为例拆解感知·推理·记忆·执行【意图路由、规划编排、长期记忆、工具执行、面试题】

本文基于四维架构(感知·推理·记忆·执行),以HR Agent为例,系统拆解大模型应用从“聊天”到“生产可用”的落地路径。通过Spring AI实现意图路由、规划编排、RAG检索与工具调用,结合真实踩坑复盘,揭示架构化设计对安全、成本与可维护性的关键价值,为AI Agent工程化提供可复用的实战框架。

王大师企业官方博客 1323

DAAE2008 Innovative Building Structures Semester 2 2024Statistics

WeekLesson andLectureTutorial11 AugBasics -Loads,28 AugTypes ofresComeready with1a forreview anddiscussion315 AugTypesof1-waystructuresStability.Comeready withof Assnt1b422 AugComeready with。

bilimint的博客 804

避坑指南:AUTOSAR FlashDriver操作DFlash模拟EEPROM时,你最容易忽略的5个细节

本文深入探讨了AUTOSAR FlashDriver在DFlash模拟EEPROM操作中最容易被忽视的五大细节问题,包括地址合法性检查、操作时序控制、并发访问冲突、电源稳定性管理和寿命管理。通过实际项目案例和工程化解决方案,帮助开发者避免常见陷阱,提升汽车电子控制单元(ECU)的可靠性和稳定性。

weixin_42741930的博客 249

AI 问数真的能替代 BI 报表吗?

AI问数赋能自然语言查询,提升临时分析效率,但无法替代传统报表。报表适用于稳定输出与持续监控,AI则擅长探索性提问。企业用好AI问数,关键在于夯实数据模型、统一指标口径、健全权限体系与结果校验机制。合理组合报表、仪表板与AI,才能实现高效、准确的业务洞察。

葡萄城技术团队博客 338

Ubuntu终端AI编程助手配置:Claude Code接入DeepSeek模型全攻略

在软件开发领域,AI编程助手正成为提升开发效率的重要工具。其核心原理是通过大语言模型理解自然语言指令,生成、解释或调试代码。这类工具的技术价值在于将AI能力无缝集成到开发工作流中,减少上下文切换,实现更流畅的人机协作。常见的应用场景包括代码生成、错误调试、代码重构和技术问答等。本文聚焦于在Ubuntu系统中,将流行的终端AI助手Claude Code的后端模型从原版Claude替换为DeepSeek。通过配置环境变量实现API端点和模型的映射,这一过程涉及Node.js环境管理、npm包安装和关键环境变量设

weixin_42527654的博客 380

Linux环境下离线升级GCC-9.4.0的完整实践指南

本文详细介绍了在Linux环境下离线升级GCC-9.4.0的完整实践指南,包括准备工作、依赖库安装、编译配置及常见问题解决。特别适用于企业内网或安全要求严格的服务器环境,帮助开发者高效完成GCC离线升级,提升编译性能并支持现代编程语言特性。

weixin_29288313的博客 673

ChatGPT、Perplexity、Gemini 与 AI Overviews 引用对比:谁的引用更可信

AI 引擎的引用机制差异很大:ChatGPT 以行内引用加 Sources 列表呈现来源,Perplexity 几乎逐句可溯源,Gemini 在回答中内嵌相关来源链接,AI Overviews 则把多源聚合答案与来源列表一起放在搜索结果顶部。本文从引用透明度、来源偏好、可干预性 3 个维度对比这 4 个引擎,并给出 GEO 的 3 点启示,帮企业在多引擎环境下提升被引用的概率。

淡然一笑 的专栏 276

Spring Cloud 整合(一) CRUD

Springcloud 整合之 CRUDSpringcloud介绍功能概述为什么要选用Springcloud Springcloud介绍 功能概述 实现微服务 Spring Cloud为开发人员提供了工具,以快速构建分布式系统中的某些常见模式(例如,配置管理,服务发现,断路器,智能路由,微代理,控制总线,一次性令牌,全局锁,领导选举,分布式会话,群集状态)。分布式系统的协调导致样板式样,并且使用Spring Cloud开发人员可以快速站起来实现这些样板的服务和应用程序。 为什么要选用Springcloud

Kerwin-Lin的博客 1501

【从零理解 Spring AI · 12】MCP 的两种角色:做客户端还是做服务端

上一篇讲了 MCP 的概念:标准协议、三大角色、M+N 替代 M×N。

nice_lcj520的博客 615

一步一步教你如何安装IP-Guard(客户端WINDOWS篇)

1、安装完服务器后,在服务器右下角有一个IP-GUARD图标:如图 2、点图标右键选注册: 3、注册成功后, 4、在开始菜单里选生成客户端安装包。 5、生成客户端安装包成功,安装名字可以任意,但是最好是英文名字。 6、将客户端安装程序复制到桌面。 7、退出所有杀毒软件、安全卫士、电脑管家等然后运行 8、安装完成后,立即重启计算机。IPguard客户端安装完成。 9、这样在控制里就可以看到已经安装客户端的计算机,在线显示蓝色,灰色表示计算机已经离线货关机 ...

IP-Guard专栏 5634

dex2oat编译优化调试

dex2oat编译调试的一些技巧和方法

jidapenglin28的专栏 5049

抽象主义人工智能和生命体AI的内在联系

彭军辉提出“抽象主义人工智能”作为第四大AI范式,批判符号主义、连接主义、行为主义剥离生命本体的误区,确立“智能是现象,生命是本体”的核心公理。主张原生智能必须依附具备存续诉求的生命本体,提出“生命体AI理论”,构建七层演化阶梯与自闭环工程框架,强调智能不可跳过底层存续机制直接模拟语言。该体系为生成式AI提供科学边界,推动从“仿真表象”向“原生智能”的范式跃迁,开辟硅基人工生命新赛道。

抽象主义人工智能和生命体AI 207

【华为OD机试真题】6、数组去重和排序 | 机试真题+思路参考+代码解析(C++、Java、Py、C语言、JS)

题目描述 >给定一个乱序的数组,删除所有的重复元素,使得每个元素只出现一次,并且按照出现的次数从高到低进行排序,相同出现次数按照第一次出现顺序进行先后排序

KJ.JK 3890

OpenAI Control Room 架构拆解:给企业 AI Agent 加一套可审计的急停系统

OpenAI 公开了用于追踪和停止研究模型工作负载的 Control Room。本文拆解 job_id、推理前鉴权、35 秒撤销窗口与 Fail Closed 设计,并给出企业 AI Agent 急停控制面的数据模型、FastAPI 参考实现、缓存撤销策略和故障演练清单。

jerry764的博客 343

026:vue+threeJS 设置地面铺砖的效果

BoxGeometry 是 Three.js 中用于创建立方体或长方体的几何体类。它允许你指定立方体的宽度、高度、深度以及这三个方向上的分段数,从而控制立方体的细分程度。width: 立方体的宽度(沿 x 轴方向)。height: 立方体的高度(沿 y 轴方向)。depth: 立方体的深度(沿 z 轴方向)。widthSegments: 可选参数,指定立方体在 x 轴方向上的分段数,默认值为 1。heightSegments: 可选参数,指定立方体在 y 轴方向上的分段数,默认值为 1。

大剑师兰特的GIS世界 649

锂电池充电器电路设计 里面有电路

锂电池充电器电路设计 里面有电路 3.7V升压到5V电路设计。

OpenClaw 深度调查:把 AI 助手做成你自己的控制平面

对 openclaw/openclaw 的完整技术尽调:Gateway 架构、Agent 运行时、工具与沙箱、30 个消息通道、181 个插件、安全信任边界、工程代价与采用建议。17 章 / 10 张图,全部数字标注口径,数据截至 2026-10-31。

厚积薄发 349

计算机控制技术及应用

《计算机控制技术及应用》通过总结作者的科研成果和吸收国内外的先进理论、方法和技术,以计算机控制系统的网络化、开放化、智能化和集成化发展趋势为主线索,主要介绍计算机控制系统的基本概念和计算机控制系统的典型形式,计算机控制系统的数学描述与基本分析方法,以及数字PID控制器、最少拍控制系统、达林算法、状态变量设计法等设计方法及其各种改进算法。重点突出计算机控制系统输入输出通道接口的设计方法和典型控制系统的设计案例与实现方法等。

AI赋能智慧港口建设|造形家快速生成港口全要素三维场景

随着智慧港口、港口数字孪生项目的持续推进,港口三维场景的需求日益旺盛。传统港口三维建模,往往需要航拍倾斜摄影采集数据,再人工搭建吊机、岸桥、船舶、集装箱等大量工业设施模型,项目周期长、人力成本高,修改迭代繁琐,制约港口可视化项目落地效率。国产AI三维建模工具,依托卫星影像 AI 识别能力,无需航拍作业,一键快速搭建港口完整三维场景,为港口数字孪生、方案汇报、投标演示提供高效的场景解决方案。

m0_69539167的博客 85

WINCC7.3破解文件

WINCC7.3硬件够破解文件,有需要的下载!WINCC7.3硬件够破解文件,有需要的下载!

最新的sdio 4.0 spec 协议标准 带书签 高清完整PDF版

Part-E1-SDIO-Specification-Ver4.00-Final-120220.pdf:最新的sdio 4.0 spec 协议标准 带书签 高清完整PDF版,包括SDIO 接口的外设,SDIO 接口官方协议等。

从设备增点到治理闭环:老旧小区物业数智化落地实践

系统连接合同审批、银行流水、收费记录与项目台账,执行到期提醒、收入核验、异常标色和月度对账,让每一笔资金来源明确、去向可查。针对设施老旧、诉求响应慢、公共收益不透明等问题,津南以6类小区为试点场景,统一建设物业数字化底座,关联楼栋、单元、房屋、业主、空间、设施设备、工单、公共收益等核心数据。系统采用统一编码管理,将摄像头、路灯、井盖、道路、绿化等设施纳入资产台账,解决纸质记录更新滞后、故障责任难追溯的问题。基于历史工单建立分类模型和知识库,辅助识别照明、给排水、电梯、环境秩序、秩序维护等问题;

wuyeshuzhihua的博客 161

企业微信iPad协议详解:接口接入、实时消息同步与语音转码实践

深入解析企业微信iPad协议的技术架构与开发思路,涵盖API接口接入、长连接通信、实时消息同步、Silk语音转码、异常重连及高并发优化,帮助开发者了解企业微信自动化系统的设计与实现。

欢迎来到祖安! 513

Product Hunt 热榜 2026-11-13:Plurai Simulation、YouArt Desktop App、Omnigraph

2026-11-13 Product Hunt 新产品精选:Plurai Simulation、YouArt Desktop App、Omnigraph。汇总 15 款产品的中文介绍、功能关键词和产品链接。

LaughingZhu的博客 617

【AI Agent面试系列】AI Agent可观测、评测、安全相关的知识点

之前的文章介绍了和,本文主要介绍AI Agent的测评、可观测等知识。

406

Docling 原理解读:是什么、为什么、怎么样

从论文视角拆解 Docling 的整体架构、DoclingDocument 数据模型、PDF 预处理、版面分析、OCR、TableFormer 双解码器、阅读顺序与装配流程,并解释版面框与 OCR 框的区别。

PLANTTHESON的博客 401

WorkBuddy 实战:一句话需求 → 七屏可交互原型,户外徒步 App 的 AI 设计全流程

WorkBuddy 实战:一句话需求 → 七屏可交互原型,户外徒步 App 的 AI 设计全流程,跟着博主一起来还原整个过程。

夜郎King的博客 5164

从认识人工智能到理解机器学习:我的 AI 入门第一课

正式开始学习人工智能之前,我对 AI 的认识其实比较模糊:知道 ChatGPT、知道大模型,也知道现在很多岗位都在谈 AI,但如果有人问我“人工智能到底是什么”“机器是怎么学会识别一只猫的”,我未必能从头到尾讲清楚。上午的课程更偏向行业全景:人工智能的发展、研究方向、NLP、岗位分工、学习路线和 AI Coding 工具。下午的课程更偏向技术基础:机器学习的原理、有监督学习、深度学习、模型训练和评估方法。

chh563的博客 568

企业宣传片发前如何批量排查并遮挡视频里的敏感信息

做企业视频的人都会碰到一个具体问题:实拍画面里混进了不该出现的信息。办公室背景里有贴着客户信息的白板,采访对象的授权书边缘露出一串身份证号码,街采素材里路人面孔和车牌号直接入镜。人眼在时间线上扫视,会漏掉快速闪过的帧、画面边缘的小字、以及暗光区域里的证件号码。用抹影AI完成车牌、人脸和证件区域批量检测后,又手动补充了两个时间段的屏幕遮罩,最终导出时画面已无合规隐患。重点关注快速运动、遮挡、低光照条件下的目标,这些是漏检的高发区域。导入视频后选择要检测的目标类型(人脸、车牌、证件号、二维码等)。

Mysssone的博客 181

面向工业对讲的双通道声学 DSP 模组 A-59(NR2050-A)方案解析与工程落地案例

A-59模组以NR2050-A DSP为核心,37.5×16mm邮票孔封装,支持-40℃~85℃工业温域,兼容A-06/A-09/A-29系列,可低成本替换存量设备。通过固件切换实现三种模式:模式一(低改版成本,适配矿井、电梯);模式二(最优AEC,用于医院呼叫);模式三(双波束独立输出,支持双人会议语音分离)。集成AEC、ENC、BF与AGC算法,有效抑制回声、噪声与串扰,解决对讲系统核心声学难题。选型需注意参考信号路径、麦间距与温度匹配,建议先做声学测试再量产。

R190_6589的博客 373
上一篇: FINA865-2024V2 Financial Risk Management
下一篇: AM05 Workshop 2 - Data acquisition
WX_codehelp
博客等级 码龄2年 700粉丝 87原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值