COMM5501 Data Story Project Guide

COMM5501 Data Visualisation and Communication - 2024 omesProgramlearningoutcomesdatausingavarietyofsoftware•PLO1 :BusinessKnowledge•PLO2 :• PLO3 :BusinessCommunicationate andinterpretdatagraphics•PLO1 :BusinessKnowledge• PLO3 :BusinessCommunication。 阅读详情

Data Story Project Guide

COMM5501

Introduction

The major project for COMM5501 is structured to provide students a step-by-step guide to building their own data story on a topic of their own choosing, related to the UN Sustainable Development Goals (SDGs). A link to the SDGs is included HERE for your convenience.

Students will need to select a contemporary challenge related to the SDGs, find the relevant data, process and present this data in an insightful and coherent manner, and apply their own judgement based on their findings to give an evidence-based recommendation to the identified challenge.

Whilst there is a “Data Story Content” assessment and a “Data Story Project” assessment as part of this course, we will use the term “Data Story Project” to refer to the overall process of creating your data story.

The first three components of the Data Story Project will focus on building content for your data story. The fourth component will combine the content from the first three into the final version of the data story, and students will present their collated work in an appropriate format (guidance will be provided).  The fifth component will require students to showcase their work as part of their profes- sional portfolio.

This Data Story Project has a total weighting of 80% of your final grade for this course.  The 5 com- ponents mentioned above will be submitted throughout the term.  The key details for each component are provided below.

Please note that this document is only a guide for what to expect, as we may make changes during the term to respond to unforeseen circumstances.  This document should not be seen as being set in stone.

0    Engagement and Participation

A large component of success in this course is to engage with your peers for feedback. The labs/tutorials in particular are critical to making sure you are on the right track. Based on feedback from previous students, we are reinforcing this messaging by including a lab participation component to this course.

There are 9 labs in total.  Students start with 1%, and will receive an additional 2% for participation in each lab, up to a maximum of 7 labs (i.e.  a max total of 15%).  We of course strongly recommend that students attend all labs, but we also understand that sometimes unforeseen circumstances prevent you from attending all classes.

If you are unable to attend your regular lab in one week, you may attend a different one for that week, but you will need to let the tutor know.

1    Choosing your Challenge

1.1    Description

The first component (excluding component 0 above) of the Data Story Project will introduce students into this task by proposing a topic that is both of interest to them and has a meaningful impact to the broader society. The chosen topic will need to connect to at least one if the UN SDGs.

For this chosen topic students will need to provide:

• An Impact Statement explaining why that proposed topic is important, both in general and to them individually, and

• Identify a relevant data set from a reputable source that can support this topic.

This will serve as a starting point for subsequent components of the Data Story Project.

The purpose of this submission is to receive feedback from a member of the teaching team as well (students would already have received peer feedback before submitting).

NOTE: Students are NOT locked into this topic for the final version of their data story, and are allowed to adjust their topic statement/question as they progress through the semester.

This component is has a 5% weighting towards your final grade.

1.2    Supporting Activities

Topic 1 will contain various activities to support students in exploring the SDGs broadly.  The lecture for Topic 2 will provide an introduction into writing an effective Impact Statement, and the corre- sponding lab in week 2 will contain aguided activity for students to write their own Impact Statement.

Students will also post a copy of this component for their formative forum post for week 2, where they will receive peer feedback. Students are encouraged to take any additional feedback they receive here

into consideration before submitting the deliverable for this task.

1.3    Deliverables

Students will gather all the feedback they’ve received and make any changes they feel are necessary, then post an updated version of their work to the Deliverables  section on Moodle to receive feedback from the teaching team. Your post will need to contain the following:

• A single-sentence topic statement/question,

• A corresponding Impact Statement (max 200 words),

• A link to the chosen data set, a brief description of the data set, and a proposal for how the chosen data set might be used to support the Impact Statement (max 50 words).

1.4    Due Date

11:59pm Sunday of Week 3.

1.5    What makes a good submission?

N/A, the first component is formative in nature.  However, to maximise the benefit from this activity, students will need to incorporate feedback they’ve already received and make a genuine effort to present their best Impact Statement.  Students will then receive some additional feedback from the teaching team for this work.

2    Good Graph, or Good Grief

2.1    Description

The second component of the Data Story Project will take the ideas of “good” and “bad” data visu- alisations and apply them to their chosen topic.

Students will take the data set they chose from the “Choosing your Challenge” component (or another data set if necessary) and document their process of improving their first chart, the types of feedback they received, and how they implemented this feedback.

This task serves multiple purposes:

•  Documenting the process with clear notes creates a reusable resource for referring back to the process you used to create your graph.

•  It reduces the chance of repeating the same mistakes and speeds up the process for creating your subsequent graphs.

•  More broadly, it reinforces the learning process.  You are very likely learning a relatively new skill, and it’s very easy to forget a detail if you don’t write it down (this is still true if you’re

refining an existing skill).

You will receive peer feedback throughout this process. This component will have very limited tutor feedback.

This component is has a 5% weighting towards your final grade.

2.2    Supporting Activities

The lab in week 3 will contain guided activities to help students build effective data visualisations, and receive peer feedback on their work before submitting.  The lab in week 4 will have an activity to help you start on the Thank You Team activity (Section 2.3.2).The formative forum post in week 3 will give students another opportunity to get additional feedback from other students.

Some of the elements from Topic 4 on stakeholders may also be relevant for this component, as a large portion of understanding the purpose of a graph comes from understanding the target audience as a stakeholder.

2.3    Deliverables

There are 2 sets of deliverables for this second component.

2.3.1    Growing my Graph

Students will submit a single PDF document to Turnitin containing the main iterations of their graph supporting the Impact Statement. You do not need to include every single version of your graph, just key checkpoints and major changes.

This document also needs to have brief notes on the changes made between each iteration.  These notes should contain not only the change being made, but should also mention the rationale behind the change (i.e. Why did you make that change?).  The notes can be dot points, but you can also have more text if you feel this is necessary.

These notes should be detailed enough to be a convenient reference material for yourself later in the term. A sample has been provided on Moodle for what this may look like.

2.3.2    Thank You team!

The deliverable for this task is a completed  “Thank you team!” form. (available on Moodle) and a

follow-up Moodle post.

The activity for completing the form. will be completed in the week 5 lab.  Details for this task can be found in the week 4 and week 5 lab activities document, as well as the form. provided on Moodle.

After the activity, students will need to make a follow-up post in the Deliverables section on Moodle to summarise the key parts of your presentation.  A sample has been provided on Moodle for what

this may look like.

2.4    Due Date

•  GyG: 11:59pm Sunday of week 4. You will need this to complete the Tyt activity in the week 5 lab.

•  Tyt activity: Week 5 lab

•  Tyt follow-up post: 11:59pm Sunday of week 5.

2.5    What makes a good submission?

The purpose of deliverable 2.3.1 is to create a record that you can revisit when making subsequent data visualisations to speed up that process and make better visualisations.  The information below is a more detailed guide for making a better set of resources for yourself (traditionally, this might sometimes be called a “marking rubric”).

2.5.1    Good and Bad Visualisations

What separates a poor from a useful resource lies in the notes. It’s entirely possible that you created a very good graph in your first attempt and you didn’t need to make many changes.  If there were elements of your first draft that were good that you deliberately kept the same, document your reasons for doing that as well.

Poor

There is little documentation explaining the process of iterating the graph.  At best, the documentation is largely declarative, e.g.   “colour scheme changed from bright red to dark blue”, instead of explanatory, e.g.  “The bright red colour scheme was uncomfortable to look at, so I changed to dark blue. Much more comfortable” .

Acceptable

Changes (or lack thereof) are largely driven by the visualisation prin- ciples covered in class (e.g.  Gestalt or Tufte’s principles), and this is documented.

Excellent

Changes are driven primarily by the underlying purpose  of the graph: the message being conveyed and the target audience. The visualisation principles covered in class are also considered, but these are secondary concerns.

2.5.2    Thank You team!

The “formal” term for this deliverable is a “reflection”, and should be based on the Gibbs’ Reflective

Learning Cycle. For example, if you want to reflect on a particular piece of feedback (e.g.  your group did not see the pattern you intended in your graph), then run through the six steps.  Use the table below to help you write your reflection, then again to help you make a self-assessment.

3    Writing a Wrong

3.1    Description

The third component of the Data Story Project will explore an opposing perspective to that chosen by the student.  It is very easy to find information supporting any given perspective (confirmation bias), so students will need to genuinely consider this opposing perspective, assess its merits, and create an appropriate counter-argument.  Students will need to find a source that opposes their chosen stance, analyse this stakeholder using the framework from Topic 4, and provide an evidence-based assessment of the validity of this source.  The focus of this component is to use data to provide the counter-argument.

The purpose of this task is for students to show versatility by working outside their own boundaries and considering an opposing perspective. There will again be opportunities to receive feedback from peers and from a tutor.

Please note that this component is a summative task and will be graded by tutors. This component is has a 20% weighting towards your final grade

3.2    Supporting Activities

The lab in week 5 will contain guided activities to help students nominate and analyse the opposing perspective, including identifying the corresponding stakeholder that might hold this opposing per- spective.  The stakeholder framework from Topic 4 can then be used to understand this stakeholder further, so that a response can be planned.

As with previous components, there will also be formative discussion forum posts for getting further peer feedback.

3.3    Deliverables

Students will submit a single PDF document to Turnitin containing their finalised work from week 5. This document will need to include:

• Your topic question/statement and summary of the challenge for reference.  This will not be

marked, but will give the marker the appropriate context for this deliverable.  This can be the same as (or very similar to) what you submitted in the first deliverable.

•  Citing the chosen opposing perspective (for example, a link would suffice), and the likely stake- holder with this view.

• A brief summary of the opposing perspective.  (max 200 words)

• Any relevant data visualisations used in the opposing perspective (clearly label and caption these as appropriate).

•  Data visualisations created by the student that form. the bulk of the counter-argument.

• Accompanying written notes to give context to student’s data visualisations and express the overall approach of the counter-argument.  (max 200 words)

NOTE: Whilst the stakeholder framework from Topic 4 is not an explicit part of the deliverables for this component, it is highly recommended that you use it to help structure your counter-argument.

3.4    Due Date

11:59pm Wednesday week 7. We have brought the due date back from the usual Sunday to try and

allow the teaching team to begin marking earlier.

The teaching team will try to do our best to provide feedback in a timely manner.  Unfortunately, we cannot guarantee a 1-week turnaround. However, there will still be peer feedback from the corre- sponding formative assessment, as well as informal feedback from your tutor to help you refine this third component for use in the fourth (and fifth) component(s).

SpringBoot+Vue+MySQL 高校学科竞赛平台 完整可运行版(源码+文档) 本项目基于SpringBoot+Vue+MySQL构建高校学科竞赛管理平台,覆盖学生、教师、领队教师、管理员四大角色,实现竞赛发布、报名、刷题、评分、公示等全流程闭环管理。系统架构清晰,技术主流,配套完整源码、数据库脚本、万字论文、开题报告、答辩PPT及部署文档,支持一键运行,适用于毕业设计、课程设计及院系二次开发,真正实现“开箱即用”。 阅读详情

相关推荐

InSAR数据获取实战指南:Sentinel-1、精密轨道与ALOS PALSAR DEM的下载与应用

本文详细介绍了InSAR数据获取的实战指南,重点解析Sentinel-1数据、精密轨道数据(OPOD)和ALOS PALSAR DEM的下载与应用技巧。通过实际案例和代码示例,帮助读者掌握数据筛选、下载加速、校验及多源数据协同使用的关键方法,提升地面形变监测的精度与效率。

weixin_29215815的博客 433

InnoDB 内存结构总览:Change Buffer、AHI 与 Log Buffer

本文系统梳理InnoDB内存结构中的ChangeBuffer、Adaptive Hash Index(AHI)与LogBuffer。ChangeBuffer缓存二级索引页不在内存时的变更,减少随机IO,仅在页加载时合并;聚簇索引修改立即执行,因数据本身不可延后。AHI基于高频等值查询自动构建哈希索引,加速定位,仅支持等值操作。LogBuffer为redo log内存缓冲,配合磁盘日志实现崩溃恢复。三者均服务于性能优化,其中ChangeBuffer与AHI共享BufferPool空间,而LogBuffer独立

bksczm的博客 310

游戏经济数值模型的搭建过程——以标准卡牌游戏为例

一、总体规划 1.玩家分类 首先我们按照下表对玩家进行分类 付费能力即为充值额度;充值行为比如购买月卡/购买钻石;消费行为比如用钻石抽卡 在这里我们假设玩家是理性的,即玩家会以追求更高的性价比为目标进行充值与消费(即小R会优先买首冲+月卡,而不是买一个无用的无属性皮肤) 不同类型玩家之间的差异,实际上就主要由这些行为的差异而决定。 注:早期游戏制作的时候,活跃程度也是区分玩家类型的一个重要依据。不过目前现在游戏中有各种手段抹平了不同活跃玩家的差异(体力限制,活跃时间长的收益递减)..

dudu3332的博客 4230

信创环境下PageOffice文档控件适配与实践

信创适配做到文档控件这一层,拼的已经不是"有没有国产版本",而是同一个功能在两类终端上是否真的等价。等价的标准很具体:同一次点击能得到同样的结果,同一份公文能得到同样的版式,同一个项目不需要维护两套代码。这背后是三件并不轻松的工作:服务端用一套接口同时支撑两类终端,客户端把两种系统与四种芯片的安装包分发清楚,文档内核层由产品侧跟着 WPS 的版本走。浏览器这一层的压力,则被收进了产品自己的窗口里——升级节奏由产品掌握,不再交给运气。

zi_wu_xian的专栏 336

消费级显卡跑大模型:RTX 3060 12G 部署 70 亿参数 AI 编程助手的优化实战

本文详细介绍了如何在消费级显卡RTX 3060 12G上,通过量化、投机解码和分页KV-Cache等核心优化技术,成功部署并流畅运行70亿参数的CodeLlama-7B编程助手。文章提供了从环境配置、模型准备到参数调优的完整实战笔记,实测显存占用降至7.3GB,生成速度达21.7 token/秒,为开发者和技术爱好者提供了可行的本地AI部署方案。

weixin_29053067的博客 1266

用python提取PDF中各类文本内容的方法

用python提取PDF中各类文本内容的方法

安静的软件工程师 6089

第三篇 第 6 课

前置:第三篇第 1 课(stdx 引入),第二篇第 1 课(std.regex)。环境:仓颉 SDK 1.2.0。本文所有代码与输出均逐行实测。

weixin_41618057的博客 557

华为 S2600T 存储 3 种网络端口(H4/H5/串口)用途解析与故障恢复实战

本文深度解析华为S2600T存储设备的三种关键网络端口(H4/H5/串口)的功能用途与故障恢复方法。通过详细的配置指南和实战案例,帮助管理员掌握管理接口(H4)的日常运维、维护接口(H5)的高级应用以及串口的应急操作,提升存储设备的可靠性和维护效率。

weixin_30899023的博客 339

【从零理解 Spring AI · 12】MCP 的两种角色:做客户端还是做服务端

上一篇讲了 MCP 的概念:标准协议、三大角色、M+N 替代 M×N。

nice_lcj520的博客 615

2篇5章1节:实验流行病学的核心特征和设计原则

本文系统阐释实验流行病学的核心定义、四大核心特征、四大基本原则及主流设计类型,结合骨科、肿瘤科、儿科、精神科、内外妇儿及公共卫生等多学科临床实践案例,具象化解读人为干预、随机分组、平行对照、前瞻性设计的核心内涵与应用价值。同时,规范梳理对照、随机、盲法、重复四大研究基本原则,详细介绍临床试验、现场试验、社区试验三类主流研究设计的适配场景与应用差异。

MD Code 180

使用Verilog实现QR分解——嵌入式 [设计与代码]

通过Verilog的硬件描述语言,我们可以将QR分解算法实现为硬件电路,并在嵌入式系统中高效地运行。本文将介绍如何使用Verilog设计并实现QR分解算法,该算法用于将一个矩阵分解为正交矩阵Q和上三角矩阵R。具体而言,QR分解通过对矩阵的列进行正交化处理,得到正交矩阵Q,并将对应的正交化结果存储在上三角矩阵R中。该算法通过将矩阵分解为两个部分,正交矩阵Q和上三角矩阵R,实现了对矩阵的分解和变换。模块,该模块接收待分解矩阵A,并输出正交矩阵Q和上三角矩阵R。下面给出了使用Verilog实现QR分解的源代码。

CodeMaven的博客 623

pcl2启动器下载(Minecraft PCL2 启动器 最新版 安装与使用说明)

摘要:PCL2(Plain Craft Launcher 2)是一款面向 Minecraft 的第三方启动器,支持正式版与快照版本管理、模组与整合包安装、Java 运行时自动匹配,绿色免安装、双击即可运行。适合在 Windows 上玩单机整合包、需要多版本共存或离线启动的用户使用

2611_96675819的博客 226

vs code , 配置 claude code 插件, 默认选项 : --dangerously-skip-permission

摘要:本文介绍如何在VS Code中为Claude Code插件配置--dangerously-skip-permission参数,包含两种方法:图形界面设置(适合新手)和直接编辑settings.json(精准配置)。该参数会跳过权限检查,仅建议在本地测试环境中使用。配置后需通过命令面板验证参数是否生效,并注意安全风险,避免在生产环境使用。多参数配置时需用数组格式,不同版本插件可能键名略有差异。

AI天才研究院 5018

spring boot 4集成SQLLite,及其SQLLite的建库

spring boot 4集成SQLLite,及其SQLLite的建库

weixin_41463944的博客 237

efm32 入门.pdf

本PDF共计22页,介绍的是操作驱动API,下载与否自己斟酌。

Probability and Statistics - 4th edition

Probability and Statistics - 4th edition

Java 集合容器高频面试题全解:HashMap 树化阈值、1.7 死循环与 ConcurrentHashMap 演进(2026 招聘 JD 真题复盘)

HashMap 树化阈值 8 的泊松分布依据、退化阈值 6 的防抖设计、JDK 1.7 头插成环死循环的排查与修复、1.8 尾插后为何仍线程不安全、ConcurrentHashMap 放弃分段锁的原因与 ForwardingNode 协作扩容、computeIfAbsent 死锁陷阱、大集合找重复的场景题选型,附三层追问链自测。题目来源为 38 期公开招聘 JD 样本与字节、拼多多、建行、美团、快手公开面经。

蒙眼过河 427

Camera2Demo

在Camera2 的基础上进行封装,使得Camera2一堆初始化逻辑与Activity分离,降低耦合度,完成预览拍照并保存的操作

spdlog 同步日志库使用详解

spdlog是一个轻量级 C++ 日志库,支持同步日志、异步日志、多线程日志、日志文件轮转和自定义日志格式。对于嵌入式 Linux 应用开发,我建议先使用。它可以帮我们完成:日志级别过滤。时间戳和线程 ID 输出。日志格式化。终端和文件输出。多线程安全写入。日志文件按大小或时间轮转。我们不需要自己实现互斥锁、文件写入、日志格式化和轮转等底层功能。

zengjiajun2006的博客 1124

Data-Structures-and-Algorithm-Analysis-in-Java.pdf

作者: Weiss, Mark A. 出版社: Addison Wesley Data Structures and Algorithm Analysis in Java is an “advanced algorithms” book that fits between traditional CS2 and Algorithms Analysis courses. In the old ACM Curriculum Guidelines, this course was known as CS7. This text is for readers who want to learn good programming and algorithm analysis skills simultaneously so that they can develop such programs with the maximum amo...

JavaSE通关手册:数据类型与变量

代码无需额外处理,编译时编译器自动完成转换。

xys_678的博客 236

IDEA 简介:从零认识 IntelliJ IDEA

IDEA 全称,是由 JetBrains 公司开发的一款主流 Java 集成开发环境(IDE)。它集代码编辑、编译、调试、测试、版本控制、构建管理等功能于一体,被大量 Java 开发者视为日常开发的首选工具。所谓 IDE(Integrated Development Environment,集成开发环境),就是把写代码所需的各类工具整合到同一个界面中。相比只用文本编辑器加命令行编译,IDE 能显著减少重复操作,让开发者把精力集中在业务逻辑上。

ztI10的博客 185

Docker部署linkding:HTTPS与数据备份

部署私人书签库,除了让页面能够打开,还需要考虑几个实际问题:重建容器后数据是否保留、登录和保存是否正常、升级前怎样备份,以及出现 502 或 CSRF 错误时从哪里检查。本文使用 Docker Compose 部署 linkding,采用默认 SQLite 数据库,通过 Caddy 提供 HTTPS,并完成账户创建、数据持久化验证和备份。如果重建后账户或书签消失,应先检查是否换了项目目录、改了挂载路径,或者启动了另一套实例,不要急着重新初始化。遇到权限问题,应根据日志确认具体目录和运行用户,再调整权限。

tedcloud123的博客 194

动态代理两大流派:JDK 代理与子类代理

业务类想加日志,最直白的写法是侵入式修改: 问题很明显:每个方法都要改一遍,改一个业务要动十处。代理模式的解法是:调用方不直接依赖 ,而是依赖一个代理对象。代理对象长得跟目标一模一样,调用它 → 代理先执行增强逻辑 → 再转调真实对象。 关键在于:代理对象的类型是哪来的?这就是"动态"二字的含义:代理类在运行时才诞生。两个角色: 承载增强逻辑, 负责生成代理类。 组装代理并调用: 输出: 业务代码 一行没动,增强逻辑全在 里。这就是 AOP 的味道。 内部四步: 第 2 步 内部:先查 (同一个接口

Android的专栏 661

C++20协程怎么运行?原理与三大核心组件深度剖析

C++20协程是轻量级的无栈状态机,通过co_await、co_yield、co_return实现挂起与恢复,由Promise、协程句柄和Awaitable三大组件协同工作。协程与线程互补,适用于高效管理大量并发I/O任务,显著降低上下文切换开销。其核心在于编译器生成的状态机机制,需配合库(如cppcoro)使用。掌握Promise控制逻辑、句柄生命周期管理及Awaitable语义,是构建高性能异步程序的基础。

Lucis__的博客 336

c++ explicit关键字详解

explicit。

拒绝AI文,努力在AI时代写出感动人心的好文章 169

TRingBuffer两端都能增删(快递站版)

TRingBuffer 是一个支持两端增删、下标访问且容量动态增长的环形双端队列。它通过无符号索引的永不归零设计,利用减法自动模运算实现空满判断与元素计数,避免了传统环形缓冲浪费格子的问题。内部以票号(索引)标记首尾,扩容时重排元素为连续存储,保证 O(1) 操作与高缓存效率。虽不线程安全,但其高效性使其成为游戏开发中事件队列、命令缓冲等场景的理想选择。

u013768914的博客 315

Teamcenter Java SOA 开发:连接、查询与保存

本文介绍如何通过 Java 调用 Teamcenter SOA 接口实现外部系统对接,涵盖连接登录、查询保存等核心操作。以最小闭环示例展示 Connection、Service、ModelObject 等关键组件的使用,强调错误处理与事务管理要点。梳理了 DataManagement、Query、File Management 等 API 模块分工,并结合“工作移交WebService”案例,说明幂等性设计与流程状态返回的重要性。适用于 Web 门户、ERP 集成等场景,建议批量操作用 bulk 接口优化性

软件工程师文艺 277

Java 项目实战:交友项目后台系统——网关统一鉴权与 B 端管理后台

本次改造通过引入SpringCloud Gateway实现网关统一鉴权与路由,新建mf-admin管理端复用C端域服务(Dubbo调用),实现管理员登录与用户管理四件查询。核心套路:网关白名单+双体系JWT(同工具不同payload)、管理端零直连业务库、分页形态区分(MySQL自动count/Mongo手动count)、浏览器端独立聚合。踩坑12条,附自检清单与后续改造方向,可复用于多角色后台系统。

Wang的专栏 70
上一篇: BFA507 Accounting and Accountability for Decision
下一篇: FINS5542 Find a time period
WX_codehelp
博客等级 码龄2年 700粉丝 87原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值