Ubuntu16.04+NVIDIA驱动418.56+CUDA10+CUDNN7.5.1+opencv3.4.0

重装了几次系统后，终于能含泪写下自己的安装过程，为以后重装做个记录T T

一、NVIDIA驱动

Ubuntu18.04安装英伟达显卡驱动
安装nvidia驱动418.56

安装后续步骤或环境必需的依赖包，依次输入以下命令:

sudo apt-get install libprotobuf-dev libleveldb-dev libsnappy-dev libopencv-dev libhdf5-serial-dev protobuf-compiler
 
sudo apt-get install --no-install-recommends libboost-all-dev
 
sudo apt-get install libopenblas-dev liblapack-dev libatlas-base-dev
 
sudo apt-get install libgflags-dev libgoogle-glog-dev liblmdb-dev
 
sudo apt-get install git cmake build-essential

二、CUDA

1.安装缺失的依赖库

sudo apt-get install freeglut3-dev build-essential libx11-dev libxmu-dev libgl1-mesa-dev libglu1-mesa libglu1-mesa-dev libxi-dev

2.安装CUDA

在CUDA所在的文件夹中打开终端，输入以下命令：

sudo sh cuda_10.0.130_410.48_linux.run