【北约】Transmit Adaptivity for Cognitive Radar 认知雷达的发射自适应性

目录

1. 简介

2. 系统模型与问题表述

A. 认知频谱感知

3. 代码设计

4. 性能分析

参考文献


原文链接

【金山文档 | WPS云文档】 Transmit Adaptivity for Cognitive Radar
https://www.kdocs.cn/l/ch6mj3i1t39k

翻译稿下载

【金山文档 | WPS云文档】 【翻译】Transmit Adaptivity for Cognitive Radar
https://www.kdocs.cn/l/ceWOKrUghrrD

在频谱拥挤的环境中进行雷达信号设计是一个极具挑战性且备受关注的问题,这是由于军事监视/遥感能力以及民用无线服务的需求不断增加所致。本研究致力于合成优化的雷达波形,以确保其与叠加的授权电磁辐射源实现频谱兼容。利用无线电环境图(REM)提供的认知信息,作为智能动态频谱分配的关键。实际上,REM提供的信息被用来对雷达波形施加动态频谱约束,从而使雷达波形成为一种受约束的优化过程的结果,旨在提升雷达的一些性能指标(如检测、旁瓣、分辨率和跟踪)。本文提出了一种能够生成最优波形的求解方法。该方法需要将原始问题松弛为一个凸优化问题,并具有多项式时间复杂度。

1. 简介

    雷达与通信系统的共存是近年来备受众多科学家和工程师关注的一个关键问

Qlib上手学习记录 Qlib 是一个面向人工智能的量化投资平台,其目标是通过在量化投资中运用AI技术来发掘潜力、赋能研究并创造价值,从探索投资策略到实现产品化部署。该平台支持多种机器学习建模范式,包括有监督学习、市场动态建模以及强化学习等。真的是走了很多弯路step 1. 使用 ananconda 建立环境,要主要必须是 python 3.8失败的下了以后 进入 glib folder 后执行是会报错的,不管你还什么source 都一样,整了很久使用前最好看下这个。 阅读详情

相关推荐

05、基于ALV表报实现复选框、全选、取消全选等功能

基于Function ALV实现复选框、全选及取消全选等功能

wo520yl1314的博客 2373

光学系统设计:波段、光源、光纤与探测器匹配指南

在光学测量和光纤通信系统中,波段、光源、光纤和探测器的匹配关系是系统设计的核心基础。波段指电磁波谱中的特定波长范围,光源负责产生特定波长的光信号,光纤作为传输介质需要与波长匹配以降低损耗,探测器则负责将光信号转换为电信号。理解各组件的光谱特性对于系统性能至关重要,例如在850nm短波长多模光纤系统中,VCSEL激光器与PIN光电二极管的组合能提供最佳性价比。典型应用场景包括生物医学成像、光纤通信和气体传感,其中光谱重叠优化、模场直径匹配和偏振特性协调是关键技术要点。通过实测数据对比不同组合的传输性能,可以为

weixin_33812433的博客 339

N5105核显直通PVE:从黑屏到HDMI输出的完整指南

PCI直通能让虚拟机独占物理设备,但核显直通远没有独显那么轻松。Intel核显与CPU、显示输出链路的强耦合使UEFI引导、GOP驱动、驱动签名等环节都成了黑屏陷阱。在PVE虚拟化环境中,通过IOMMU开启、vfio-pci绑定、OVMF固件和Q35机型配合,可以绕过KVM检测,让Windows虚拟机正确驱动核显,从HDMI口输出画面,并解锁Intel Quick Sync硬解能力。这种方案尤其适合N5105等低功耗迷你主机,可作为客厅HTPC、本地视频硬解或依赖硬件加速的轻量工作台。本文基于N5105平台

weixin_31082403的博客 379

Optisystem软件与Matlab软件的联合数据读取

目录 Matlab软件程序编写 Optisystem软件的连接与设置 数据读取结果 Matlab软件程序编写 利用Matlab软件按照下图编写程序,保存为getdata.m文件。 OutputPort1 =InputPort1; fileID=fopen('OSAdata.txt','wt'); fprintf(fileID,'%f\n',OutputPort1.Sampled.Signal); fclose(fileID); Optisystem软件的连接与设置 (以基于线性插值法

Vivian_Chen_的博客 4855

手把手教你学Simulink——基于Simulink的全双工无线通信仿真建模示例

目录手把手教你学Simulink——基于Simulink的全双工无线通信仿真建模示例一、背景介绍二、所需工具和环境三、步骤详解步骤1:创建Simulink模型步骤2:设计输入信号步骤3:添加调制模块步骤4:添加自干扰消除模块步骤5:添加AWGN信道步骤6:添加接收端处理步骤7:添加解调模块步骤8:计算误码率(BER)步骤9:添加显示模块步骤10:设置仿真参数步骤11:运行仿真并分析结果四、总结 全双工(Full-Duplex)无线通信技术允许在同一频段上同时进行数据的发送和接收,这与传统的半双工(Half-

MHD0815的博客 183

【回答问题】ChatGPT上线了!如何安装python-ipopt?python-ipopt有哪些用法?

python-ipopt是一种基于Python语言的求解非线性最优化问题的软件包。它使用了Interior Point Optimizer(IPOPT)算法来求解最优化问题。这段代码使用python-ipopt求解了一个无约束的非线性最小化问题,其目标函数为(x[0] - 1) ** 2 + (x[1] - 2) ** 2,求解结果为x_opt。求解线性规划问题、二次规划问题、二次范数最小化问题等类型的最优化问题。对于给定的最优化问题,可以设置不同的求解参数来控制求解的精度和效率。

源代码杀手的博客 2146

【系统分析师】2025年下半年真题:论文及解题思路

摘要 本文探讨软件测试技术的应用,重点关注静态测试与动态测试的比较。静态测试在不运行程序的情况下,通过审查、走查等方式分析需求、设计文档和代码,能早期发现高层次缺陷,降低修复成本。动态测试通过实际运行程序,使用单元测试、集成测试等方法验证功能性能,是发现运行时错误的唯一途径。二者在缺陷类型、介入阶段和修复成本上具有互补性,建议项目实践中结合使用以提升软件质量。

数据知道的博客 5790

请举手回答,LDO和DC-DC有什么不同?

文章目录1 LDO是什么2 LDO典型电路3 DC-DC是什么4 DC-DC典型电路5 LDO和DC-DC区别10.2.6 小结一下 大家好,我是记得诚。 DC-DC和LDO都是电源芯片,两者差异很大,用法也不同,这篇博客讲述LDO和DC-DC的一些差异,帮助更好的认识LDO和DC-DC并进行选型。 1 LDO是什么 LDO是low dropout regulator的简称,即低压差线性稳压器,这是相对于传统的线性稳压器来说的,传统的稳压器,输入比输出要高出很多,否则无法工作,LDO可能输入比输出高1~2V

记得诚 1万+

SAP B1中文培訓教材_SDK

公司内部培训资料,对开发工具 ,DIAPI, UIAPI,Add-ON有详细解说

IMSL CNL 7.0.0 (x86-64)Crack

IMSL CNL 7.0.0 (x86-64)Crack intel的算法库破解文件,这是C++版本的破解文件

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

Statistics and Machine Learning Toolbox

Statistics and Machine Learning Toolbox(带书签),MATLAB统计学习工具

上一篇: NVIDIA Cosmos:生成式物理世界模型快速上手指南3
下一篇: 认知雷达深度学习:从入门到精通实战指南 第5章 自编码器(Autoencoder)干扰抑制实战 第6章 深度强化学习(DRL)认知决策实战
VectorShift
博客等级 码龄1年 1841粉丝 1109原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

VectorShift

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值