翻译:基于SSD和迁移学习实现对SENTINEL-1图像的船舶检测

目标检测1——SAR影像舰船数据集 关于SAR影像舰船目标的数据集分享 首先说明一下,这个数据集是我为本科毕业设计而做的,全部都是我自己一点一点标注出来的。我当初就是苦于开源的SAR影像舰船数据集太少,实在每办法就自己动手了。现在我觉得我应该把它分享出来,让大家把更多的精力放在算法的学习中,节省一点时间吧,希望可以帮到有需要的人。 1.数据集简介 关于这个数据集,我给他起名叫作S1-SSD(Sentinel-1 SAR Ship Detection)。所有的影像都是我从AFS上下载的哨兵一号卫星影像,然后我再结合Google Earth的辅助 阅读详情

翻译:COMBINING SINGLE SHOT MULTIBOX DETECTOR WITH TRANSFER LEARNING FOR SHIP DETECTION USING SENTINEL-1 IMAGES

论文地址:https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8124924

ABSTRACT

Synthetic aperture radar (SAR) images are all-weather, all-time, and wide coverage, increasingly used for ship detection to ensure marine surveillance and transportation security. Currently, deep learning has achieved enormous success in object detection with the capability of representation learning. Combining single shot multiBox detector (SSD) with transfer learning is proposed to address ship detection with complex surroundings, such as both ocean and island in this paper. SSD is chosen because its detection accuracy remains high with relative fast speed and transfer learning is chosen because it performs well even with small training datasets. Two types of SSD models integrated with transfer learning, namely, SSD300 and SSD512 with an input size of 300 pixels and 512 pixels in height and width, are applied to ship detection. To evaluate our approach, SAR images dataset acquired by Sentinel-1 are used. Experimental results reveal that compared with SSD300, SSD512 achieves lower false alarm and slighter lower in detection accuracy. These results demonstrate the effectiveness of our method.
Index Terms—Sentinel-1 images, ship detection, single shot multiBox detector, transfer learning
合成孔径雷达(SAR)图像全天候、全时、全覆盖,被越来越多地用于船舶探测以确保海洋监视和运输安全。目前,深度学习在具有表征学习能力的目标检测方面取得了巨大的成功。针对海洋、岛屿等复杂环境下的船舶检测问题,提出了SSD(single shot multiBox detector)与迁移学习相结合的方法。选择SSD是因为它的检测精度高,速度相对较快,而选择迁移学习是因为它即使在小训练集上表现也良好。将两种融合了迁移学习的SSD模型,SSD300和SSD512应用于船舶检测,其输入大小分别为300300和512512。为了评估我们的方法,使用Sentinel-1获取的SAR图像数据集。实验结果表明,与SSD300相比,SSD512具有较低的误报率和较低的检测精度。这些结果证明了该方法的有效性。
索引词:Sentinel-1图像,船舶检测, SSD, 迁移学习

1. INTRODUCTION

The Synthetic aperture radar (SAR) images have the advantages of all-weather, all-time, and wide coverage, thus increasingly used for ship detection to ensure marine surveillance and transportation security. There are three typical approaches to addressing ship detection, i.e., statistical models, features extraction and deep learning. The first two kind of methods are highly dependent on the statistics or the handcrafted features. However, the various surroundings of vessels, such as open-ocean or enclosed harbor surroundings, and the orientations of ships relative to sensors, make it difficult to describe their scattering mechanisms and distill features, thus limiting these two kinds of methods. To date, deep learning methods have been adopted for ship detection in SAR images because of its capability with representation learning [1]. [2] firstly used landocean segmentation to obtain the candidate location of ships and then exploited convolutional networks to classify ships. [3] used the faster RCNN to generate
合成孔径雷达(SAR)图像全天候、全时、全覆盖,被越来越多地用于船舶检测以确保海洋监视和运输安全。有三种处理船舶检测的典型方法,即统计模型、特征提取和深度学习。前两种方法高度依赖于统计数据或手工特性。然而,由于船舶所处的各种环境,如公海或封闭的港口环境,以及船舶相对于传感器的方向,使得对其散射机制和特征提取变得困难,从而限制了这两种方法的应用。由于深学习方法具有较强的表征学习能力,目前已被广泛应用于SAR图像中的船舶检测。[2]首先利用landocean分割得到船舶的候选位置,然后利用卷积网络对船舶进行分类。[3]使用Faster-RCNN生成包含船舶的bounding box,然后利用CFAR得到最终结果。[4]将低层特征与高层特征相结合,提高检测精度,并利用上下文特征排除误报警。[5]侧重于对冰山旁船舶的识别,[6]引入了一个用于船舶分类的数据集,但所有的船舶都来自海洋,证明了highway network有助于处理识别问题。这些方法除了[4]主要以海洋为中心导航外,缺乏对船舶复杂环境的分析,没有兼顾速度和检测准确率。
本文采用SSD,具有快速、高精度和表征学习能力。与[4]相比,将考虑复杂的航行船舶环境。此外,迁移学习将用于学习有限的小数据集的权重。为了评估我们的方法,使用Sentinel-1获得的SAR图像。

2. BACKGROUND AND PROPOSED METHODS

2.1. Single Shot MultiBox Detector

Single Shot MultiBox Detector (SSD) [7], as shown in Fig.1, is built on the basis of VGG16. It has two variations, namely SSD300 and SSD512 with different size of input images. The red line indicates that SSD300 removes the fully connection layers of VGG16. It has two components in its structure as shown in Fig.1. The first component, called a base network, is used for classification of images. There are typically two kinds of typical convolutional network used for SSD300, including VGG16 [8], and ResNet[9].

2.1 SSD

SSD[7],如图1所示,是在VGG16的基础上构建的。它有两种变体,即SSD300和SSD512,具有不同大小的输入图像。红线表示SSD300删除了VGG16的全连接层。其结构由两部分组成,如图1所示。第一个部分称为基本网络,用于对图像进行分类。SSD300通常使用两种典型的卷积网络,包括VGG16[8]和ResNet[9]。
Alt
Alt
In this paper, VGG16 is used. ResNet will be investigated in future studies. The second component is used to produce detection. It fuses multi-scale feature maps by convolutional layers to generate bounding boxes with probabilities containing interested objects. Subsequently, non-maximum suppression is used to generate the detection results.
本文使用了VGG16。ResNet将在未来进行研究。第二部分用于识别,它通过卷积层融合多尺度特征图,生成包含感兴趣对象概率的bounding box。然后,使用非最大抑制NMS(non-maximum suppression )来生成检测结果。

2.2. Transfer learning with SSD

Transfer learning [10, 11] is beneficial to tasks that have few data that are insufficient to train a good model, when the same task in a different domain may have numerous data. Applying transfer learning to deep learning models allows the learning features from multiple layers with less data. Its common routines alter the final structures of models that are pretrained on public datasets but maintains the weights of first few layers, thus only learning the weights of modified layers.
Transfer learning has improved the accuracies in SAR classification. Due to its benefits, it is also adopted to tackle the limited number of ship training datasets. For example [12] classifies SAR data through transfer learning with parameters from the model trained on CIFAR 10 to TerraSAR-X data. [13] exploits transfer learning to deal with SAR target classification. [14] adopts transfer learning to classify polarimetric SAR images by transferring the weights pretrained on PASCAL VOC to the weights in the models trained on Gaofen-3 SAR images. Here, like [14], the weights in the layers directly involving the output are relearned as indicated by red in Fig.2.

2.2 SSD与迁移学习

迁移学习[10,11]对于数据较少、不足以训练良好模型的任务是有益的,而同一任务在不同领域可能有大量数据。将迁移学习应用到深度学习模型中,可以在更少数据的情况下实现深层学习特性。它通常改变模型的最终层,这些模型是在公共数据集上预训练得到,但前几层的权重保留,因此只要学习修改后层的权重。
迁移学习提高了SAR分类的准确率。由于它的优点,它也被用来处理有限的船舶训练数据集。例如,[12]通过用CIFAR10模型训练TerraSAR-X得到模型参数并用于SAR数据分类。[13]利用迁移学习来处理SAR目标分类。[14]采用迁移学习对极化SAR图像进行分类,将在PASCAL VOC上预先训练的权值转换为在Gaofen-3 SAR图像上训练的模型权值。在这里,与[14]一样,直接涉及到输出层中的权重将被重新学习,如图2中的红色所示。

3. EXPERIMENTAL IMPLEMENTS AND RESULTS

Our experimental workflow is shown in Fig.3.
我们的实验过程如图3

3.1. Experimental Dataset

Three polarimetric dual polarimetric VH-VV imageswith Interferometric Wide Swath (IW) mode were acquired by Sentinel-1 at Shanghai Harbor, and their information is shown in Table 1. Among these images, the first two are used to train and validate the models, and the final image is used to evaluate the robustness of trained models.
Sentinel-1在上海港口获得了三类IW(Interferometric Wide Swath )模式的VH-VV图像,其信息如表1。其中,前两类图像用于训练和验证模型,最后一类图像用于评估训练后模型的鲁棒性。
在这里插入图片描述
在这里插入图片描述

3.2. Construction of dataset

To acquire the training data, we first identify and choose some containing ships subareas in the first two images. Five candidate regions are selected visually. After identifying the regions, the five candidate images are split into sub images with the size of 256 pixels × 256 pixels in height and width respectively. Finally, 269 sub images with 514 small ships are labeled by open source LabelImg. There is an example showing the image and its corresponding labeled image with red rectangles indicating the locations of ships.

3.2 建立数据库

为了获得训练数据,我们首先在前两类图像中识别并选择了一些包含船舶子区域的图像。可视化地选择五个候选区域。识别区域后,将5类候选图像分割为高、宽256像素×256像素的子图像。最后,用LabelImg对带有514艘船舶的269张子图像标记。下图中显示了原图及其对应的标记图像,红色矩形表示船舶的位置。
在这里插入图片描述

3.3. Training details

After construction of ship SAR images and their corresponding labels, 80% of sub images are used to train the model, thus leading 215 sub images for training. Since the number of ships available for the training sample is limited, both transfer learning (section 2.2) and data augmentation are adopted. As shown in [7], data augmentation methods, such as horizontal flip, random crop and color distortion, and random expansion, increase the detection accuracy by 11.7%. Such methods are utilized in this experiment. Cumulatively, 11 methods are employed to expand the dataset. Even though only 232 images are used, the number of the training data points increases to 2552.

3.3 训练细节

构建SAR船舶图像及其对应标签后,80%的子图像用于训练模型,从而利用215个子图像进行训练。由于可供训练样本使用的船舶数量有限,因此采用了迁移学习(第2.2节)和数据扩充两种方法。如[7],采用水平翻转、随机裁剪和颜色失真、随机展开等数据增强方法,使检测准确率提高了11.7%。本实验总共使用了11种方法来扩展数据集,虽然只使用232幅图像,但是训练数据的数量增加到了2552。
Learning policies are guided by [7, 15, 16]. The followings give the main hyperparameters used in this paper and other parameters are same as [7]. Base learning rate is chosen to be 0.000001. This is an empirical value because if it is set larger than 0.000001 or the same as in [7], underflow occurs, leading to failure to train the model. Batch size is chosen as 6. This value is chosen to make the full use of our GPU, NVIDAI GTX 1070, with the memory 8G. Moment is set 0.99 because of its fast convergence. Weight decay is 0.0005 and iterations 240,000.
学习策略由[7,15,16]指导。下面给出了本文使用的主要超参数,其他参数与[7]相同。选择基础学习率为0.000001。这是一个经验值,因为如果它被设置为大于0.000001或与[7]相同,就会发生下溢,导致无法训练模型。Batch size为6。选择这个值是为了充分利用GPU,NVIDAI GTX 1070的内存为8G。Moment(矩)取0.99,因为它收敛速度较快。 Weight decay 为0.0005,iterations 为240,000。

3.4. Experimental results

There are two ways to evaluate our methods, including testing images to validate trained models and comparing to typical images of various contexts to evaluate the robustness of trained models. To evaluate the performance of ship detection, probability of false alarm a F , probability of detection d P and 1 F are used as defined from formulas (1)-(3).

3.4 实验结果

评估我们的方法有两种方法,一种是通过图像测试集来验证训练后的模型,另一种是通过比较不同上下文的典型图像来评估训练后的模型的鲁棒性。为评价船舶识别性能,采用式(1)-(3)定义的误报率Fa、检测概率Pd和F1来评价船舶检测性能。 在这里插入图片描述
After training, test images are used to evaluate our approach. There are 26 images containing 37 ships used for the test trained model. The results are shown in Table 2.
训练后,测试集被用来评估。训练模型使用了26张包含37艘船的测试图像。结果如表2所示。
在这里插入图片描述
SSD512 has the lower false alarm, but SSD300 performs slightly better than SSD512 in ship detection. Besides, SSD512 has higher value in F1 than to evaluate the outputs of our models, SAR images that contain ships near islands, harbors, and in the open ocean are tested. SSD300 performs better in Fa , but SSD512 performs better in Pd .
To evaluate the robustness of our approach. Three typical areas containing ships, i.e., ocean, island and land are used. The results are shown in Table 3 and Fig.5-Fig.7. It is obvious that even in complex surroundings, such as near island, land and ocean, SSD300 has the advantage of detection over 95%, whereas SSD512 has the advantage of lower false alarm probability less than 15.11%. Specifically, 1) both SSD300 and SSD512 achieve more than 97% detection accuracy and lower than 4% false alarm on the ocean; 2) SSD300 has 15% higher false alarm compared with SSD512 near the island; 3) compared to the resutls on the ocean, both SSD300 and SSD512 perform more than 12% lower in false alarm near the land, which may be caused by the scattering mechanisms of nearby building in the harbor and land. Form the results above, SSD512 performs better than SSD300 with regard to F1 . Besides, even the data used for ship detection is quite small, both SSD300 and SSD512 perform well, demonstrating the effectiveness of our approach.
SSD512具有较低的误报率,但SSD300在船舶检测方面略优于SSD512。此外,SSD512对岛屿附近、港口附近和开阔海域的船舶SAR图像进行了测试,在F1的值要高于对模型输出值的估计。SSD300在Fa表现较好,而SSD512在Pd表现较好。
为了评估我们的方法的鲁棒性,使用了海洋、岛屿和陆地三个船舶所在的典型地区。结果如表3和图5-图7所示。很明显,即使在岛屿、陆地、海洋等复杂环境中,SSD300的检测优势也超过95%,而SSD512的误报率小于15.11%。具体而言,1)在海洋环境,SSD300和SSD512检测准确率均在97%以上,误报率低于4%;2) 在岛屿环境下,SSD300的误报率比SSD512高15%;3) 在陆地,SSD300和SSD512误报率都比海洋上的研究结果低12%以上,这可能是由于附近建筑物在港口和陆地上的散射机制造成的。从以上结果可以看出,SSD512在F1的性能优于SSD300。此外,即使是用于船舶检测的数据也非常小,SSD300和SSD512的性能都很好,证明了我们方法的有效性。
在这里插入图片描述
在这里插入图片描述
在这里插入图片描述
在这里插入图片描述

4. CONCLUSION

SSD is combined with transfer learning to perform ship detection. SSD considers both the computational efficiency and detection accuracy of the program, thus making it possible to use interferometric wide swath SAR images to monitor marine traffic and ensure the security of ships. Additionally, transfer learning is used to address problems associated with the limited number of ships that are available for training. In this paper, two different models, SSD300 and SSD512, are used to assess ship detection. Experimental results reveal that SSD300 has the advantage of detection over 0.95, whereas SSD512 has the advantage of lower false alarm probability less than 0.1511 even in complex navigation surroundings.

4.结论

SSD与迁移学习相结合,实现船舶检测。SSD既考虑了程序的计算效率,又考虑了程序的检测精度,使得利用IW SAR图像监测海上交通,保证船舶安全成为可能。此外,迁移学习用于解决可用于训练船舶数量有限的问题。本文采用SSD300和SSD512两种不同的模型对船舶检测进行了评估。实验结果表明,SSD300的检测性能优于0.95,而SSD512即使在复杂的导航环境中,其误报率也低于0.1511。

5. 参考文献

SSD Single Shot MultiBox Detector.pdf SSD论文原文,内容真实,排版正规,视觉效果良好。算法初步介绍,希望可以帮助你学习,推广机器视觉。 立即下载

相关推荐

别再只抄代码了!深入理解MQ2传感器数据手册,搞定ppm换算公式

本文深入解析MQ2烟雾传感器的工作原理与ppm换算公式,从数据手册解读到数学建模,提供详细的校准与优化方法。通过实际案例和代码示例,帮助开发者准确测量气体浓度,解决常见问题,提升传感器应用的可靠性。

weixin_42713608的博客 506

RCNN学习笔记(10):SSD:Single Shot MultiBox Detector

之前一直想总结下SSD,奈何时间缘故一直没有整理,在我的认知当中,SSD是对Faster RCNN RPN这一独特步骤的延伸与整合。总而言之,在思考于RPN进行2-class分类的时候,能否借鉴YOLO并简化faster rcnn在21分类同时整合faster rcnn中anchor boxes实现multi-scale的思想而设计出了SSD,这篇blog关于SSD的细节方面整理的很好,以供参考。

Focusing on your own Mind :) -> 站在巨人的肩膀上 3万+

神经网络基础-从零开始搭建一个神经网络

人工神经网络(Articial Neural Network,简写为ANN)也称为神经网络(NN),是一种模仿生物神经网络和功能的计算模型,人脑可以看做是一个生物神经网络,由众多的神经元连接而成,各个神经元传递复杂的电信号,树突接收到输入信号,然后对信号进行处理,通过轴突输出信号。人工神经网络也是类似,通过模仿人脑的“学习机器”,通过不断“看”数据(比如图片,数字),自己总结规律,最终学会预测(比如分类图片)在深度学习中,损失函数是用来衡量模型参数的质量的函数,衡量的方式是比较网络输出和真实输出的差异。

Zach的博客 4016

SAR图像舰船目标检测介绍

作者:SIGAI人工智能平台,出处:SIGAI人工智能平台,公众号:SIGAI ----------------------------------------- 1.SAR舰船目标检测概述 合成孔径雷达(Synthetic Aperture Radar, SAR)具有全天候、全天时、不受天气影响等成像特点,目前已经成为人们对地观测的重要手段之一[1]。因此,利用SAR数据进行目标检测...

战斗蜗牛的专栏 2万+

别再死记硬背了!用‘小乌龟’实战图解ROS1核心指令(rosnode/rostopic/rosparam保姆级手册)

本文通过经典的turtlesim乌龟仿真器,以可视化实战方式讲解ROS1核心指令(rosnode/rostopic/rosparam),帮助初学者摆脱死记硬背,在操控乌龟的过程中轻松掌握节点管理、话题通信和参数设置等ROS1核心概念。

weixin_28731223的博客 372

测试丢包_电信IPRAN承载LTE业务丢包故障处理案例

银川 景旭阳电信IPRAN承载LTE业务丢包故障处理案例一.故障现象某地市IPRAN网络承载LTE基站业务,客户反馈近期丢包严重,基站侧ping侧核心网EPC丢包达到10%左右;且基站数量在10个左右,并分布在同一地区,需要IPRAN网络协助排查;随后查看了IPRAN网络;发现这些业务所在基站的PW-BFD历史告警存在频繁的UP/DOWN告警;综上信息展开故障处理,初步判断由于BFD频繁...

weixin_29740921的博客 1913

[自用代码]ENVI输出的Sentinel-1图像预处理(翻转,滑动窗口裁剪)

import cv2 import os from osgeo import gdal import numpy as np def tif_jpg(rasterfile): in_ds = gdal.Open(rasterfile) # 打开样本文件 xsize = in_ds.RasterXSize # 获取行列数 ysize = in_ds.RasterYSize block_data = in_ds.ReadAsArray(0, 0, xsize, ysize

weixin_38757163的博客 1820

指纹对抗指南:如何绕过Cloudflare与Akamai的5s盾与浏览器指纹检测

现在的CDN反爬技术虽然越来越强,但是道高一尺魔高一丈,只要掌握了指纹伪造、流量伪装、行为模拟这些核心技术,就可以绕过绝大多数的防护措施。对抗过程中要注意效率和成本的平衡,小规模爬取用Playwright+stealth最方便,大规模爬取用curl_cffi+代理池性价比最高,遇到验证码用打码平台或者自动识别服务,不需要死磕破解。本文介绍的方案已经在实战中验证过,可以绕过95%以上的Cloudflare/Akamai防护,成功率非常高。

专注于Python爬虫开发,分享爬虫技巧、项目实战与反爬经验,使用Scrapy、BeautifulSoup等工具,解决数据抓取难题。 302

哨兵-1 Sentinel-1数据下载(欧空局)

Sentinel-1数据下载1、Sentinel-1 数据简介2、Sentinel-1 数据下载步骤2.1 在欧空局(ESA)下载Sentinel-1 数据2.1.1网站页面介绍2.1.2 数据下载步骤 1、Sentinel-1 数据简介 Sentinel-1 由 Sentinel-1A 和 Sentinel-1B 两颗卫星组成的星座,它们共享相同的轨道平面,轨道相位差为 180°。 该任务为地球的连续雷达测绘提供了独立的操作能力,并为需要长时间序列的操作服务和应用程序提供了增强的重访频率、覆盖范围、及时

Vigo*GIS 2万+

电子凸轮追剪算法深度解析:2500字图解+代码实战

工艺需求:在物料连续运动过程中完成精准切割核心矛盾:切割瞬间刀具与物料必须绝对同步传统方案:机械凸轮(结构复杂,调整困难)现代方案:电子凸轮(柔性可调,精度更高)

QQ_778132974的博客 1115

星敏感器:卫星姿态测量的“星空导航仪”

在卫星、航天器和深空探测器的姿态控制系统中,星敏感器(Star Tracker) 是最精确的姿态测量设备之一。它通过识别恒星的位置,计算出航天器在惯性空间中的三轴姿态,精度可达 角秒级(arcsecond),是许多高精度任务(如遥感、天文观测、深空探测)的核心传感器。

ScilogyHunter的博客 3710

哨兵卫星影像数据Sentinel-1基本参数

Sentinel-1是一个全天时、全天候雷达成像系统,它是欧洲委员会( EC)和欧洲航天局( ESA)针对哥白尼全球对地观测项目研制的首颗卫星,于2014年4月发射,经过半年试运营后,2014年10月开始逐步走向应用。Sentinel-1基于C波段的成像系统采用4种成像模式(分辨率最高5 m、幅宽达到400 km)来观测,具有双极化、短重访周期、快速产品生产的能力,可精确确定卫星位置和姿态角。它采用预编程、无冲突的运行模式,可以实现全球陆地、海岸带、航线的高分辨率监测,也可以实现全球海...

Q同学的专栏 1万+

【史上最全面esp32教程】网络篇和tcp/ip的使用

ESP32史上最全面wifi和tcp/ip连接及示例程序

m0_62599305的博客 9530

迁移学习SSD深度网络模型,实现文本行检测

向AI转型的程序员都关注了这个号????????????机器学习AI算法工程 公众号:datayx论文阅读:SSD: Single Shot MultiBox Detector 中,讲了这个最新的 Object Detection 算法。https://blog.youkuaiyun.com/u010167269/article/details/52563573既然 SSD 是用来检测物体的,那么可不可以将 SSD 用来...

datayx的文章 1180

复分析 阿尔福斯(Ahlfors) 第三版答案 英文

答案分为十章,有部分习题没有答案,全英文复分析阿尔福斯(Ahlfors) 第三版答案

精雕软件(JDpaint) 5.5 绿色版

精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版

SSD迁移攻略

前言:由于Y480电脑实在是卡的不行,而且因为经济原因不想换电脑,所以选用SSD给电脑回血的方法,让电脑在晚年恢复一点活力。。。拆机工作:换SSD首先要做的工作就是解决硬件问题,也就是拆机。。。。 总体来说,要做的事情是把原来的机械硬盘放到光驱的位置上去(这里你需要买一个光驱托架),然后把买的SSD放到电脑的硬盘位,然后把电脑装好后开机,如果在磁盘管理中能够检测到自己的SSD,证明已经装好SS

NeverGiveUp 2938

WINCC7.3破解文件

WINCC7.3硬件够破解文件,有需要的下载!WINCC7.3硬件够破解文件,有需要的下载!

【Caffe】Caffe进行迁移学习.prototxt文件详解

1.solver.prototxt net: "train_val.prototxt" test_iter: 5 #100 #(40张测试样本batch_size=8) test_interval:10 #1000 #(一次训练间隔能够进行一整个训练样本的遍历,160张,batch_size=16) # lr for fine-tuning ...

安静 802

VB摄像头监控

该VB模块可对摄像头捕获的画面进行录像等,可在创建的窗口进行控制

【实战】kaggle猫狗大战-卷积神经网络实现猫狗识别

卷积神经网络:猫狗识别 目录 第一步:导入数据集 第二步:数据预处理 第三步:迁移学习 第四步:模型保存 第五步:模型融合 第一步:导入数据集 kaggle猫狗大战数据集地址:kaggle # 将kaggle的数据集直接下载到codelab中 !pip install -U -q kaggle !mkdir -p ~/.kaggle !echo '{"username":"codingcha...

Mind_programmonkey的博客 8111

【caffe 深度学习】9.迁移学习和Snapshot使用

迁移学习:finetune 对训练好的模型进行微调。fInetune的原理是除了最后一层外,都是载入以前训练好的模型的参数,但最后一层会重新赋值重新初始化重新训练。所以我们微调主要调的是最后一层。1.打开之前下载好的caffenet文件夹,打开readme复制此链接到浏览器,下载一个训练好的模型。下载到:打开caffe官方提供的fintune文件夹里面有:2.修改网络模型文件train_val.p...

qq_40314507的博客 2700

Kaggle鱼品种识别

Kaggle比赛官网:https://www.kaggle.com/c/the-nature-conservancy-fisheries-monitoring代码:https://github.com/pengpaiSH/Kaggle_NCFM阅读参考:http://wh1te.me/index.php/2017/02/24/kaggle-ncfm-contest/相关的课程:http://cou...

女王の专属领地 4900

pytorch kaggle 泰坦尼克生存预测

也不知道对不对,就凭着自己的思路写了一个 数据集:https://www.kaggle.com/c/titanic/data 1 import torch 2 import torch.nn as nn 3 import pandas as pd 4 import numpy as np 5 6 7 class DataProcessi...

weixin_34240520的博客 1479

七月算法迁移学习 学习笔记

迁移学习定义:将在一个场景中学习到的知识迁移到另一个场景应用 Kaggle猫狗分类比赛 相同domain不同任务:老鹰&布谷鸟 不同domains相似任务:高飞狗&招财猫 为什么要迁移学习? Ø 使用深度学习技术解决问题的过程中,最常见的障碍在于,因为模型有大量 的参数需要训练,因此需要海量训练数据作支撑。 Ø 在面对某一领域的具体问题时,通常可能无法得到构建模型

大牙的博客 1781

SAR舰船检测数据集总结

SAR舰船检测数据集总结

lyp82nlf666的博客 1万+

brats数据集图像分割_比SSDD更大的SAR图像船舶检测数据集

深度学习模型的训练依赖大量的数据。针对SAR图像船舶检测中的数据问题,中国科学院空天信息研究院王超研究员带领的团队(王原原博士),构建了多源、多模式的SAR船舶切片数据集,并基于此数据集评估分析了不同对象检测模型的算法。在该数据集上训练的模型,可实现自动快速海上船舶检测,特别地,针对我国高分3号可以在无需海陆分割、无需区分成像模式自动实现船舶的快速检测。该数据集已发布于CAESAR-R...

weixin_39517546的博客 1559

08-SNAP的命令行处理工具gpt及其批处理(Sentinel-1和Sentinel-2为例)

08-SNAP的命令行处理工具gpt及其批处理前言gpt工具简介gpt实现单一操作单个数据集单一操作处理多个数据集批量单一操作处理gpt搭配流程图实现流程处理单个数据集流程图处理多个数据集批量流程图处理后语 前言 gpt工具简介 gpt实现单一操作 单个数据集单一操作处理 多个数据集批量单一操作处理 gpt搭配流程图实现流程处理 单个数据集流程图处理 多个数据集批量流程图处理 后语 ...

lidahuilidahui的博客 1万+

caffe安装+使用places365进行迁移学习

caffe安装+使用places365进行迁移学习安装ubuntu caffe cuda7.5 cudnn4.5 由于最近需要使用places365模型,是由caffe搭建了,所以又重装了次电脑,悲催。。。 安装ubnutu 分区 固态硬盘sda boot 400m ext4 swap 32g / 固态硬盘剩余所有空间 ext4 3t机械硬盘sdb,在try ubuntu中找到磁盘应用进行

qq360828703的博客 1740
上一篇: FoveaBox: Beyond Anchor-based Object Detector论文笔记
下一篇: High-Speed Ship Detection in SAR Images Based on a Grid Convolutional Neural Network 20190904
free youreself
博客等级 码龄8年 20粉丝 22原创
评论 1
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值