HDU 3486 Interviewe(RMQ+二分)

多期DID实战指南:从CSDID原理到分组加权策略 本文深入解析多期DID(CSDID方法)在政策评估中的实战应用,从核心思想到分组加权策略全面讲解。通过电商扶贫等案例,详细演示如何正确处理分批实施政策的数据分析,包括分组拆解、子模块DID操作及加权平均选择,帮助研究者规避常见误区,提升政策评估的准确性。 阅读详情

Interviewe

Time Limit: 2000/1000 MS (Java/Others)    Memory Limit: 65536/32768 K (Java/Others)
Total Submission(s): 7343    Accepted Submission(s): 1753


Problem Description
YaoYao has a company and he wants to employ m people recently. Since his company is so famous, there are n people coming for the interview. However, YaoYao is so busy that he has no time to interview them by himself. So he decides to select exact m interviewers for this task.
YaoYao decides to make the interview as follows. First he queues the interviewees according to their coming order. Then he cuts the queue into m segments. The length of each segment is  , which means he ignores the rest interviewees (poor guys because they comes late). Then, each segment is assigned to an interviewer and the interviewer chooses the best one from them as the employee.
YaoYao’s idea seems to be wonderful, but he meets another problem. He values the ability of the ith arrived interviewee as a number from 0 to 1000. Of course, the better one is, the higher ability value one has. He wants his employees good enough, so the sum of the ability values of his employees must exceed his target k (exceed means strictly large than). On the other hand, he wants to employ as less people as possible because of the high salary nowadays. Could you help him to find the smallest m?
 

Input
The input consists of multiple cases.
In the first line of each case, there are two numbers n and k, indicating the number of the original people and the sum of the ability values of employees YaoYao wants to hire (n≤200000, k≤1000000000). In the second line, there are n numbers v1, v2, …, vn (each number is between 0 and 1000), indicating the ability value of each arrived interviewee respectively.
The input ends up with two negative numbers, which should not be processed as a case.
 

Output
For each test case, print only one number indicating the smallest m you can find. If you can’t find any, output -1 instead.
 

Sample Input
  
11 300 7 100 7 101 100 100 9 100 100 110 110 -1 -1
 

Sample Output
  
3
Hint
We need 3 interviewers to help YaoYao. The first one interviews people from 1 to 3, the second interviews people from 4 to 6, and the third interviews people from 7 to 9. And the people left will be ignored. And the total value you can get is 100+101+100=301>300.
 

Source
 

题意:

给你n个数代表能力,和k。

m代表在每个范围内选1人,总共选m人,使能力总和超过k,严格大于。

求最小的m。

POINT:

假设确定了m,就是一个RMQ问题。询问m次。

我们可以二分求m。这样就不会超时了。

注意要严格大于,不然超时。TLE了一次。


#include <iostream>
#include <stdio.h>
#include <string.h>
#include <math.h>
#include <algorithm>
using namespace std;
#define LL long long
const int N = 200000+5;
int a[N];
int n,k;
int dp[N][30];
int ans=0;
void prermq()
{
    for(int i=1;i<=n;i++)
    {
        dp[i][0]=a[i];
    }
    for(int j=1;1<<j<=n;j++)
    {
        for(int i=1;i-1+(1<<j)<=n;i++)
        {
            dp[i][j]=max(dp[i][j-1],dp[i+(1<<j-1)][j-1]);
        }
    }
}
int query(int l,int r)
{
    int k=(int)log2((double)(r-l+1));
    return max(dp[l][k],dp[r+1-(1<<k)][k]);
}
int sumk(int m)
{
    int now=0;
    int l=floor(n*1.0/m);
    for(int i=0;i<m;i++)
    {
        now+=query(i*l+1,i*l+l);
    }
    if(now>k)
    {
        ans=min(ans,m);
        return 1;
    }
    else return 0;
}
void solve()
{
    int l=1,r=n;
    int mid=(l+r)>>1;
    while(mid!=r)
    {
        if(sumk(mid)==1)
            r=mid;
        else
            l=mid+1;
        mid=(l+r)>>1;
    }
    sumk(mid);
    sumk(l);
    sumk(r);
}
int main()
{
    int sum;
    while(~scanf("%d %d",&n,&k))
    {
        sum=0;
        if(n==-1) break;
        for(int i=1;i<=n;i++)
        {
            scanf("%d",&a[i]);
            sum+=a[i];
        }
        if(sum<=k)
        {
            printf("-1\n");
            continue;
        }
        prermq();
        ans=N;
        solve();
        if(ans==N) printf("-1\n");
        else printf("%d\n",ans);
    }
    
    
}


100天精通Oracle-实战系列(第14天)Veritas NetBackup(NBU) 配合 RMAN 脚本备份 Oracle 数据库 阅读详情

相关推荐

薄膜比拟、开口截面扭转承载力以及风电混塔水平缝张开状态下抗扭承载力推导

风电混塔水平缝张开状态下的抗扭承载力推导,从弹性力学说起

George的博客 872

hdu 3486 Interviewe

Time Limit: 2000/1000 MS (Java/Others)    Memory Limit: 65536/32768 K (Java/Others) Total Submission(s): 4469    Accepted Submission(s): 1095 Problem Description YaoYao has a company and he wan

云华100的专栏 490

五、2K0300 久久派开发板的GPIO控制与Shell脚本自动化实战

本文详细介绍了基于龙芯2K0300处理器的久久派开发板的GPIO控制方法,通过sysfs文件系统实现LED控制和传感器读取。重点讲解了Shell脚本自动化实战,包括LED闪烁、流水灯效果和传感器数据采集,为物联网项目开发提供完整解决方案。

silver的专栏 686

HDU-3486(Interviewe)

题意:给定一个长度为 n 的数组 s 和一个数 k,可以把 s 按顺序分成 m 组(m未知),但每一组的元素个数都必须相同,即每一组的元素个数为 n / m (末尾多余的元素舍去),分别累加m 个组的最大值的和 sum,要求 sum>k,求出最小的 m 使得这个条件满足。 分析:RMQ+暴力优化,首先对于分组数m,最大肯定是 n,那最小呢,我们先用RMQ求出整个数组的最大元素 t...

Joker & Liar的博客 379

01 ArcGIS空间分析--水文分析--利用水文分析方法提取山谷山脊线

ArcGIS空间分析的一个特别好的分析教程是汤国安老师的空间分析的内容。 实例与练习 练习1. 利用水文分析方法提取山脊、山谷线 1. 背景:山脊线、山谷线是地形特征线,它们对地形、地貌具有一定的控制作用。它们与山顶点、谷底点以及鞍部点等一起构成了地形及其起伏变化的骨架结构。因此在数字地形分析中,山脊线和山谷线以及

Meditation 1万+

手把手教你学GPU的KMD专栏--3.4 中断处理机制与优化

记住,中断处理是GPU与CPU通信的"桥梁",没有高效的中断处理,GPU的性能将无法充分发挥。KMD通过"快进快出"原则、事件标志机制、GPU本机围栏等技术,实现高效、低延迟的中断处理。:GPU本机围栏机制允许GPU在满足特定条件(如围栏值达到某个阈值)时才触发中断,而不是每次围栏更新都触发中断,从而显著减少CPU唤醒次数,降低功耗。正如Microsoft GPU架构师在2022年WinHEC大会上指出:"没有好的中断处理,再强大的GPU也会被系统延迟拖垮。:多个GPU设备共享中断,导致中断处理混乱。

MHD0815的博客 111

Interviewe hdu 3486

Interviewe<br />Time Limit: 2000/1000 MS (Java/Others)    Memory Limit: 65536/32768 K (Java/Others)<br />Total Submission(s): 1528    Accepted Submission(s): 314<br /><br />Problem DescriptionYaoYao has a company and he wants to employ m people recently. S

Rachel Zhang的专栏 2809

一文讲透 SAP VDM 命名里的前缀与后缀:看懂 I_、C_、A_,把 CDS 视图栈搭得又稳又好用

SAP S/4HANA 的 CDS 视图命名规范解析 摘要:本文详细解析 SAP S/4HANA 中 CDS 视图的 VDM 命名规范。通过前缀(如 I_、C_、R_)区分视图层级,后缀标记附加角色,结合 @VDM.viewType 注解形成完整语义体系。I_作为稳定接口层,C_面向特定场景裁剪,R_限定应用域内复用,A_提供远程 API 接口。命名规范使团队能快速识别视图用途、依赖关系和扩展边界,确保模型长期可维护性。文章结合制造业物料主数据、Fiori 应用等实际案例,说明如何通过规范命名构建清晰的视图

2007 年 ~ 2025 年,深耕 SAP 技术 18 年 219

Interviewe(RMQ )

YaoYao has a company and he wants to employ m people recently. Since his company is so famous, there are n people coming for the interview. However, YaoYao is so busy that he has no time to interview...

Steve·Curcy 502

RK3588上使用PCIE接口的国产千兆网卡YT6801

YT6801是裕太微电子开发的一款国产千兆PCIE以太网控制器芯片,可作为RK3588的PCIE外扩网口使用。

荻夜的博客 8199

华为OD机试真题2025双机位A卷 Java&Go 实现【优美子数组】

华为OD机试真题2025双机位A卷 Java&Go 实现【优美子数组】

MISAYAONE的博客 237

hdu 3486 Interviewe(二分+rmq)

Interviewe Time Limit: 2000/1000 MS (Java/Others)    Memory Limit: 65536/32768 K (Java/Others) Total Submission(s): 5827    Accepted Submission(s): 1374 Problem Description YaoYao has a compan

llin-黎辰 683

你一直忽略的神器:离你最近的超强语音输入法(微信语音输入全攻略,支持全局混用)

你一直忽略的语音输入工具🎤 ,其实就在身边!无需额外软件,即可实现全局语音转文字⚡ 支持中英文混输,还能与其他输入法混合使用,聊天、办公都能高效完成,让你的输入效率轻松翻倍🚀

XiaoqiangClub的博客 903

hdu 3486 Interviewe 二分+RMQ

#include #include #include #include #include using namespace std; const int maxn=200010; int dp[20][maxn];//dp[i][j]表示从第j个元素开始,连续的2^i个元素中的最大值 int a[maxn],n,m; int lg[maxn];//lg[i]求表示2^t=i,lg[i]=f

冷月之殇 1793

WINCC7.3破解文件

WINCC7.3硬件够破解文件,有需要的下载!WINCC7.3硬件够破解文件,有需要的下载!

Data-Structures-and-Algorithm-Analysis-in-Java.pdf

作者: Weiss, Mark A. 出版社: Addison Wesley Data Structures and Algorithm Analysis in Java is an “advanced algorithms” book that fits between traditional CS2 and Algorithms Analysis courses. In the old ACM Curriculum Guidelines, this course was known as CS7. This text is for readers who want to learn good programming and algorithm analysis skills simultaneously so that they can develop such programs with the maximum amo...

hdu 3486 Interviewe (二分+RMQ)

问题描述: Problem Description YaoYao has a company and he wants to employ m people recently. Since his company is so famous, there are n people coming for the interview. However, YaoYao is so busy that

ww的博客 473

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

hdu3486【ST+RMQ】【二分答案】Interviewe

here 附上一图 怎么说呢,首先是对long long 有了新认识,这东西的内存太大了。数组开long long日常爆内存 32000K 好像是只能开7*106的int 其次就是scanf读入。我用的int写成了lld给我卡了半天。 还写了好几个版本的check函数,裂开了,我都开始怀疑是不是RMQ的板子有问题了额。 最后就是关于二分答案这个事情。 个人测试这个二分答案还是过不去的。 这里是存在一定的问题。可能是测试数据的问题 如果说数据更多更大,二分就会出问题。 // god with me //

peacesir的博客 223

C# WinForm 基于DirectShow.dll编写的程序,可边预览边保存视频,音频和图片

基于微软的DirectShow.dll的二次开发1.自动识别连接的摄像头跟麦克风且可以对其进行选择(默认选中第一个)2.可录制wmv和avi两种格式的视频并且都带有音频,avi可以录制的分辨率和帧数进行选择,wmv默认进行了淸晰度优化如不喜欢可去除代码中有相关提示3.可在预览点开之后进行拍照,也可边录制视频边拍照4.添加了视频和音频的压缩功能(酌情使用)这次二次开发发现C#对DirectShow的相关信息太少,这次做完也不敢藏私共享出来,还望大家指正

HDU 3486 Interviewe ( rmq+二分+枚举)

链接: Interviewe 题意: 要求 将 n 个人 划分成 n/m 个区间 ,每个区间选一个,问最少选几个人,可以使得 这 m个人的价值 大于 k。 思路: 大体看上去是可以二分的,人越多,可以选的就越多价值就越大,但是最后会舍弃掉 一部分人,这就会使得 它会有一小部分不满足单调性。所以最后还需要枚举一下比得到的答案小的点。(不二分,直接枚举也可以,关键是算出最小需要的人数) 。cheak 的时候 一定要注意右端点 wa哭了。 代码: #include<iostream> #includ

hddddh的博客 221

L - Interviewe HDU - 3486(RMQ+二分)

YaoYao has a company and he wants to employ m people recently. Since his company is so famous, there are n people coming for the interview. However, YaoYao is so busy that he has no time to interview ...

Kuguotao的博客 279

Hdu 3486 Interviewe(二分+RMQ)

题目地址:http://acm.hdu.edu.cn/showproblem.php?pid=3486 思路:二分选择个数m即可,开始只考虑各个区间长度,未考虑是否能够选够m个,wa了几次。。。。 #include #include #include #include #include using namespace std; const int maxn=2e5+50; int n,k; i

哆啦AC梦的博客 563

hdu 3486 Interviewe (二分+RMQ)

Interviewe Time Limit: 2000/1000 MS (Java/Others)    Memory Limit: 65536/32768 K (Java/Others) Total Submission(s): 7381    Accepted Submission(s): 1759 Problem Description YaoYao has a compan

Timeclimber 442

HDU 3486 Interviewe【二分+rmq】

题意: 给出 n 个序列,要求把它分成长度相等的m份,多余的去掉,要求每份的最大值之和大于 k。 问最少要分成多少份。 分析: 二分区间,用rmq预处理出区间最大值。 #include <stdio.h> #include <string.h> #include <math.h> #define max(a,b)(a)>(...

weixin_33976072的博客 88

hdu 3486 Interviewe (RMQ+二分)

Interviewe Time Limit: 2000/1000 MS (Java/Others)Memory Limit: 65536/32768 K (Java/Others)Total Submission(s): 4543Accepted Submission(s): 1108 Problem Description YaoYao has a company and ...

weixin_34111819的博客 90

hdu3486Interviewe(二分是错的)(ST算法RMQ + 判定上下界枚举)

题目大意是找最小的m使得前m段中每一段的最大值相加严格大于k,每一段长度为[n/m](n/m向下取整,多余的后半部分部分n-m*[n/m]不要) 先给一段我一开始的思路,和网上许多题解思路一样,但其实是有错误的。二分答案+RMQ (RMQ部分也可以用线段树) #include <bits/stdc++.h> using namespace std; const...

weixin_33705053的博客 126

HDU3486----Interviewe----二分+一维RMQ

题目地址:http://acm.hdu.edu.cn/showproblem.php?pid=3486 题目意思: 给定n个数的序列,让我们找前面k个区间的最大值之和,每个区间长度为n/k,如果有剩余的区间长度不足n/k则无视之。 现在让我们找最小的k使得和严格大于m。n 解题思路: 用二分枚举k,然后用RMQ来查询区间内的最大值,即可 代码: #include #include

Bob Lee's Blog For CS 1163

【HDU 3486】【二分+RMQ】 Interviewe 【最小化区间个数m,使得每个区间最大值和大于k】

传送门:HDU 3486 Interviewe 描述: Interviewe Time Limit: 2000/1000 MS (Java/Others)    Memory Limit: 65536/32768 K (Java/Others) Total Submission(s): 6666    Accepted Submission(s): 1580 Prob

魔笛手的博客 777

HDU 3486 Interviewe (RMQ+暴力,3级)

F - Interviewe Crawling in process... Crawling failed Time Limit:1000MS     Memory Limit:32768KB     64bit IO Format:%I64d & %I64u Submit Status Appoint description: System Crawler (2

nealgavin的专栏 1268
上一篇: HDU Find the hotel(RMQ)
下一篇: HDU 2888 Check Corners(二维RMQ)
Mr_Treeeee
博客等级 码龄10年 38粉丝 551原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值