华为/华三/思科设备常用巡检命令

华为/华三:
查看CPU:dis cpu
查看授权:dis license
查看内存占有率:dis health
查看日志:dis logbuftrer
查看版本信息及运行时间:dis version
查看端口状态及协议:dis ip int bri
查看配置:dis current-configuration
查看进程:dis process
查看arp:dis arp
查看子卡的运行状态:dis device
查看环境设施状态:dis environment

浪潮思科:
基本信息:ROM状态:switch:
用户模式:switch>
特权模式:switch#
全局配置模式:switch(config)#
接口模式:switch(config-if)#

查看配置:switch#show running-config
查看交换机进程:switch#show processes
查看端口信息:switch#show int stauts
查看arp信息: switch#show arp
查看mac信息:switch#show mac address-table
查看邻居信息:switch#show cdp neighbors
查看CPU信息:switch#show processes cpu
查看内存信息:switch#show processes memory
查看版本信息及运行时间:switch#show version
查看运行状态:switch#show device-sensor details
查看环境设施状态: switch#show env all

<think>好的,我现在需要帮用户整理不同品牌交换机的配置命令对比,包括华为华三、锐捷和思科。用户提到了四个品牌,我得分别找出它们在VLAN、管理IP、网关等常见配置上的命令差异。 首先,用户提供的引用中有华为华三的例子,比如华为的VLAN接口IP配置是`ip address 192.168.1.1 255.255.255.0`,而华三删除VLAN接口用的是`undo interface vlan-interface 20`,设置网关则是`ip gateway 192.168.1.1`。这些信息可以作为基础,但还需要补充锐捷和思科的部分。 接下来,我应该按照功能模块来组织对比,比如基本配置、VLAN配置、管理IP设置、网关配置、端口模式等。这样用户查阅起来更方便。需要确保每个品牌在每个功能下的命令格式正确,并且符合实际配置习惯。 对于思科交换机,我记得VLAN配置是在全局模式下使用`vlan`命令,而接口IP配置是在接口模式下用`ip address`。锐捷的语法可能与华为类似,但可能需要查证具体命令,比如是否使用`interface vlan`来配置VLAN接口。 另外,端口模式的配置,华为华三用`port link-type`,而思科则是`switchport mode`,锐捷可能类似华为。还有保存配置的命令,各品牌差异较大,华为是`save`,华三是`save force`,思科是`copy running-config startup-config`,锐捷可能是`write`。 需要注意不同品牌在命令结构上的差异,比如华三在删除VLAN接口时用`undo`,而思科可能需要`no`命令。同时,帮助命令和查看配置的命令也要对比,方便用户日常维护。 最后,生成相关问题时要覆盖用户可能遇到的场景,比如不同品牌命令差异的原因、实际应用中的选择、版本升级的影响等。这样能帮助用户更全面地理解和应用这些命令。</think>### 不同品牌交换机配置命令对比(华为/华三/锐捷/思科) #### 1. **基本配置模式** | 功能 | 华为 | 华三(H3C) | 锐捷(Ruijie) | 思科(Cisco) | |------------------|-------------------------|-------------------------|-----------------------|------------------------| | 进入系统视图 | `system-view` | `system-view` | `configure terminal` | `configure terminal` | | 退出当前模式 | `return` | `return` | `exit` | `exit` | | 保存配置 | `save` | `save force` | `write` | `copy running-config startup-config` | #### 2. **VLAN配置** | 功能 | 华为 | 华三 | 锐捷 | 思科 | |----------------------|---------------------------------|---------------------------------|--------------------------------|------------------------------| | 创建VLAN | `vlan 10` | `vlan 10` | `vlan 10` | `vlan 10` | | 删除VLAN | `undo vlan 10` | `undo vlan 10` | `no vlan 10` | `no vlan 10` | | 进入VLAN接口视图 | `interface vlanif 10` | `interface vlan-interface 10` | `interface vlan 10` | `interface vlan10` | | 删除VLAN接口 | `undo interface vlanif 10` | `undo interface vlan-interface 10`[^2] | `no interface vlan 10` | `no interface vlan10` | #### 3. **管理IP与网关** | 功能 | 华为 | 华三 | 锐捷 | 思科 | |----------------------|---------------------------------|---------------------------------|--------------------------------|------------------------------| | 配置VLAN接口IP | `ip address 192.168.1.1 24` | `ip address 192.168.1.1 24` | `ip address 192.168.1.1 255.255.255.0` | `ip address 192.168.1.1 255.255.255.0` | | 设置缺省网关 | `ip route-static 0.0.0.0 0 192.168.1.254` | `ip gateway 192.168.1.254`[^3] | `ip default-gateway 192.168.1.254` | `ip default-gateway 192.168.1.254` | #### 4. **端口模式配置** | 功能 | 华为 | 华三 | 锐捷 | 思科 | |----------------------|---------------------------------|---------------------------------|--------------------------------|------------------------------| | 设置端口为Access模式 | `port link-type access` | `port link-type access` | `switchport mode access` | `switchport mode access` | | 设置端口为Trunk模式 | `port link-type trunk` | `port link-type trunk` | `switchport mode trunk` | `switchport mode trunk` | | 允许特定VLAN通过 | `port trunk allow-pass vlan 10`| `port trunk permit vlan 10` | `switchport trunk allowed vlan 10` | `switchport trunk allowed vlan 10` | #### 5. **其他常用命令** | 功能 | 华为 | 华三 | 锐捷 | 思科 | |----------------------|---------------------------------|---------------------------------|--------------------------------|------------------------------| | 查看接口状态 | `display interface brief` | `display interface brief` | `show interfaces status` | `show interfaces status` | | 查看当前配置 | `display current-configuration`| `display current-configuration`| `show running-config` | `show running-config` | --- ###
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值