全外显子测序分析流程3 - Exon.Interval.bed文件生成和BAM文件标记重复
分析流程步骤其他相关文章:
全外显子测序分析流程1 - Fastq质控与去接头、低质量和引物序列
全外显子测序分析流程2 - BWA-MEM比对到参考基因组与BAM统计
1. 封装流程特点
- python封装, 参数控制
- 配置文件设置核心参数,便于全流程控制
2. 运行示例
####### Exon.Interval.bed文件生成 ######
# -s: 样本名称
分析流程步骤其他相关文章:
全外显子测序分析流程1 - Fastq质控与去接头、低质量和引物序列
全外显子测序分析流程2 - BWA-MEM比对到参考基因组与BAM统计
####### Exon.Interval.bed文件生成 ######
# -s: 样本名称
Altium Designer20-柔性PCB绘制技巧
Altium Designer2020-柔性PCB绘制技巧 注:教程所用PCB随意找的,并没有完全绘制完,大家学习PCB折弯方法即可。 1.打开PCB,点击视图->板子规划模式1,如下图所示 2.点击设计->定义分割线,用两条分割线绘出要折弯的区域 3.点击设计->定义弯曲线(弯曲线呈现黄色) 4.用快捷键d,k进入layer manage stack(层叠管理器),在f...
TI电机驱动应用中MOSFET选型完整指南
深入解析TI电机驱动设计中MOSFET的选型关键,涵盖参数匹配、热性能与开关效率,帮助工程师优化系统性能并提升能效,是掌握MOSFET应用的核心参考。
Zotero内存占用与存储优化:从根源解决卡顿与空间不足
文献管理软件在学术工作中扮演着重要角色,其核心原理是通过数据库管理元数据与附件文件,实现文献的快速检索与组织。然而,随着文献库规模增长,软件的资源管理机制可能面临挑战,尤其是内存占用与存储空间优化问题。从技术价值看,高效的附件管理策略不仅能提升软件响应速度,还能确保数据安全与可移植性。在实际应用场景中,研究者常遇到软件卡顿、存储目录膨胀等痛点,这通常与附件存储模式、缓存机制及数据库维护有关。本文聚焦于Zotero这一主流工具,针对其内存占用高、文件无法删除等常见问题,提供了外置存储、链接附件、数据库维护等系
【vue看板】
大屏看板提示:以下是本篇文章正文内容,下面案例可供参考提示:这里对文章进行总结:代码量较多,看板中的。
ardupilot开发 --- Remote ID 篇
适配ardupilot的Remote ID模块研发,远程标识模块研发。Remote ID模块可以通过蓝牙或wifi向外广播无人机的状态信息、位置信息、任务信息等,并可以通过蜂窝数据向国家无人驾驶航空器一体化综合监管服务平台上报这些信息。Remote ID功能是21年起国家出台的民用无人机适航飞行的基本要求!
YOLOv8首创原创改进:即插即用|创新的轻量化非对称多级压缩LADH检测头
总结而言,本文介绍了一种名为轻量化非对称多级压缩LADH检测头的原创改进,该改进可与YOLOv8无缝适配,并显著提升了检测器的性能。在本文中,我们介绍了一种原创改进的检测头,名为轻量化非对称多级压缩LADH检测头,它可与YOLOv8无缝适配,显著提升了检测器的性能。此外,我们引入了多级压缩的概念,通过在不同的检测层级上应用不同程度的压缩,进一步提升了检测头的轻量化特性。具体而言,我们采用了逐级减少卷积核数量和通道数量的策略,以降低模型的参数量和计算复杂度,同时保持较高的检测精度。
包成功安装tiny-cuda-nn,记录安装过程中的问题解决,附带pytorch3d安装【踩坑指南】
该包可以显著提高NeRF训练速度,是和NeRFstudio等框架中,必须使用的。本文提供tiny-cuda-nn可以安装的完整包的下载链接,可以直接上传到项目中安装。附带笔者遇到的问题的解决方案。
备战数学建模38-粒子群算法pso番外篇1(攻坚战2)
粒子群算法最初是根据鸟类群体行为得到的启发,对鸟群行为进行仿真的算法,是一种启发式算法,也就是智能优化算法,利用信息共享,通过中间信息进行改进搜索,从而获得问题的可行解。我们简单从下图去体会一下粒子群算法,就是有多个鸟,每个鸟相当于一个粒子,每只鸟的位置受自己认知的历史最佳位置和当前距离食物最近的鸟的位置的影响。我们进一步分析这个图,可以得到两个公式,第一个是速度公式,即每只鸟的当前速度受上一步的速度惯性,自我认知和社会认知三部分影响,第二个是位置公式,即每只鸟的位置受上一位置和上一位置的速度的影响。
efm32 入门.pdf
本PDF共计22页,介绍的是操作驱动API,下载与否自己斟酌。
IDEA的使用指南
IDEA基于java的使用手册,可以最快速的上手,在使用中不断的丰富自己的使用技巧.
Probability and Statistics - 4th edition
Probability and Statistics - 4th edition
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")

被折叠的 条评论
为什么被折叠?