Emergency

ubuntu20.04开机进入emergency mode解决办法 ubuntu20.04开机进入紧急模式无法开机的问题解决办法 阅读详情
1003 Emergency (25)(25 分)

As an emergency rescue team leader of a city, you are given a specialmap of your country. The map shows several scattered cities connected bysome roads. Amount of rescue teams in each city and the length of eachroad between any pair of cities are marked on the map. When there is anemergency call to you from some other city, your job is to lead your mento the place as quickly as possible, and at the mean time, call up asmany hands on the way as possible.

Input

Each input file contains one test case. For each test case, the firstline contains 4 positive integers: N (<= 500) - the number of cities(and the cities are numbered from 0 to N-1), M - the number of roads, C1and C2 - the cities that you are currently in and that you must save,respectively. The next line contains N integers, where the i-th integeris the number of rescue teams in the i-th city. Then M lines follow,each describes a road with three integers c1, c2 and L, which are thepair of cities connected by a road and the length of that road,respectively. It is guaranteed that there exists at least one path fromC1 to C2.

Output

For each test case, print in one line two numbers: the number ofdifferent shortest paths between C1 and C2, and the maximum amount ofrescue teams you can possibly gather.\All the numbers in a line must be separated by exactly one space, andthere is no extra space allowed at the end of a line.

Sample Input

5 6 0 2
1 2 1 5 3
0 1 1
0 2 2
0 3 1
1 2 1
2 4 1
3 4 1

Sample Output

2 4
题目大意:有n个城市,m条道路,给定C1,C2,每个城市有team[i]个救援人数,求C1,C2最短路径有多少条,和最短路径中救援人数最大为多少。

思路:dijkstra算法,优先队列维护

代码如下:

#include<bits/stdc++.h>
using namespace std;
int team[510],vis[510];//vis[i]记录开始点到i点所需要的最短距离
struct pp
{
    int e,d,t;
};
bool operator< (const pp&a,const pp&b)
{
    if(a.d!=b.d)
        return a.d>b.d;
}
priority_queue<pp>q;
vector<vector<pp> >v;
int main()
{
    int n,m,s,e,d=INT_MAX,t=0,l=0,flag=0;
    pp p;
    cin>>n>>m>>s>>e;
    for(int i=0;i<n;i++)
        cin>>team[i];
    v.resize(n);
    memset(vis,0,sizeof(vis));
    for(int i=0;i<m;i++)
    {
        int a,b;
        cin>>a>>b>>p.d;
        p.e=b;
        p.t=team[b];
        v[a].push_back(p);
        p.e=a;
        p.t=team[a];
        v[b].push_back(p);
    }
    p.e=s;
    p.d=0;
    p.t=team[s];
    q.push(p);
    while(!q.empty())
    {
        p=q.top();q.pop();
        if(p.d>vis[p.e]&&vis[p.e]!=0)continue;
        vis[p.e]=p.d;
        if(p.e==e&&p.d<=d)
        {
            d=p.d;
            l++;
            if(p.t>t)
                t=p.t;
        }
        if(p.d>d)
            break;
        for(int i=0;i<v[p.e].size();i++)
        {
            pp l=v[p.e][i];
            l.d+=p.d;
            if(l.d>d)continue;
            if(l.d>vis[l.e]&&vis[l.e]!=0)continue;
            l.t+=p.t;
            q.push(l);
        }
    }
    cout<<l<<" "<<t<<endl;
    while(!q.empty())
        q.pop();
    return 0;
}

MTK与高通平台emergency APN配置差异 结合3GPP协议,说明在MTK、高通平台上APN bearer和name配置的规则区别,包含Android 和kaios平台。 阅读详情

相关推荐

RK3568 Android11 去除长按power键弹框的emergency按键

去除长按power键弹出对话框中的emergency按键

Terry的笔记本 2772

无人车路径规划算法Matlab+Python代码

无人车路径规划算法Matlab+Python代码 去发现同类优质开源项目:https://gitcode.com/ 本仓库提供了无人车路径规划算法的Matlab和Python代码实现。资源文件包含以下内容: Matlab代码:实现了无人车路径规划算法的Matlab版本,可用于仿真和算法研究。 Python代码:实现了无人车路径规划算法的Python版本,便于在实际项目中应用。 该资源文件旨在帮...

gitblog_06712的博客 293

ubuntu进入显示:emergency mode

        最近折腾公司的开发环境,在Ubuntu环境下,把公司的系统卸了又重装。在某次操作后,ubuntu进入时显示You are in emergency mode,如下所示:         在网上搜了半天,也没看到具体的原因。...

飞越蓝天的专栏 9019

UOS桌面系统因异常关机进入emergency mode解决方法

UOS桌面系统因异常关机进入emergency mode

u013317172的博客 9225

eQTL:连接突变与基因表达的桥梁

欢迎关注”生信修炼手册”!在高等生物中,很多的重要性状都为数量形状,比如农作物的产量,人类复杂疾病(高血液,糖尿病)等等。对于这些数量性状而言,往往受到多个基因的调控作用。为了更好的开展...

庐州月光的博客 7076

刃边法计算MTF(ESF、LSF、PSF)

MTF调制传递函数 评价一个成像系统目前主流的办法主要有三种TV line检测,MTF检测,和SFR检测。 MTF是Modulation Transfer Function的英文简称,中文为调制传递函数。 是指调制度随空间频率变化的函数称为调制度传递函数。最开始是为了说明镜头的能力。 在各个摄像头镜头中经常采用MTF描述镜头的MTF曲线,表明镜头的能力。这些曲线是通过理想的测试环境...

weixin_30911451的博客 1万+

emergency mode(紧急模式)问题处理方法

本文为您介绍emergency mode(紧急模式)问题的处理方法。

centipede198613的专栏 1万+

Aras Innovator系统配置-01对象类(一)

对象类配置-对象类属性说明

企业信息化(PLM,ERP.MES) 2032

emergency mode 处理

本节操作适用于Linux操作系统emergency mode(紧急模式)问题处理。操作步骤涉及修复文件系统操作,修复文件系统存在丢失数据风险,请先备份数据后进行修复操作。

weixin_43269452的博客 2342

『杭电1199』Color the Ball

Problem Description There are infinite balls in a line (numbered 1 2 3 ....), and initially all of them are paint black. Now Jim use a brush paint the balls, every time give two integers a b and follow by a char 'w' or 'b', 'w' denotes the ball from a to

漠宸离若的博客 499

emergency和urgency的区别_请教urgent 和emergency的区别

urgent adj.急迫的, 紧急的Compelling immediate action or attention; pressing.Insistent or importunate: the urgent words "Hurry! Hurry!"Conveying a sense of pressing importance: an urgent message.urgency ...

weixin_39576104的博客 4791

MIKE水动力笔记8_冷启动与热启动

在【MIKE水动力笔记5_建立水动力模型】中,讲到【Step 2 设置模型参数】中的【Initial Conditions】时,提到了冷启动与热启动。本博文就详细讲解何为冷启动、热启动,并通过一个案例具体分析两者不同。...

晏长街的博客 6572

/EMERGENCY_BOOT

/EMERGENCY_BOOT

zhongchengli的专栏 611

泛微系统流程表单获取节点操作者

泛微系统流程表单获取节点操作者 select typename 流程类型, workflowname 流程名称, nodename 节点名称, (case when nodetype=0 then '创建' when nodetype=1 then '审批' when nodetype=2 then '提交' when nodetype=3 then '归档' else '' end) as 节点类型, groupname 节点操作组, (case when type=1 then '部门+安

烧硬盘 4618

在blender中安装vtk插件

Blender 是一个开源的、功能强大的3D计算机图形软件,广泛用于创建动画片、视觉效果、艺术作品、3D打印模型、互动3D应用程序和视频游戏。Blender 是由 Blender 基金会开发和维护的,具有丰富的功能和灵活的扩展性。在github上下载zip插件。

如果想成为中心,那么就到中心去吧。 297

PAT 1003 Emergency

PAT 1003 Emergency 1. 题意 找出最短路径的条数,并输出某种要求下(此题是救援队伍最多)的路径的特征值。 2.分析 dijkstra算法 3.代码 #include<cstdio> #include<iostream> #define maxn 500 #define INF 100000 using namespace std; int N ,M...

说文科技,做有态度的研究。 597

ssm框架搭建

这个是一个在idea上成功跑起来的ssm框架项目,保存在这里方便以后使用直接下载

PAT 甲级1003 Emergency 题解

PAT 甲级 1003 Emergency 解题思路

qq_36404766的博客 692

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

假人有限元模型

假人模型,车辆碰撞假人有限元模型,适合做乘员安全的研究者利用

PAT甲级 1003 Emergency

PAT甲级 1003 Emergency 题目描述 As an emergency rescue team leader of a city, you are given a special map of your country. The map shows several scattered cities connected by some roads. Amount of rescue te...

weixin_43434472的博客 223

OV9734 DATASHEET,完整规格书

OV9734完整规格书,包括电气参数,尺寸规格,寄存器配置表等

1003 Emergency

Emergency分数 25全屏浏览切换布局作者 CHEN, Yue单位 浙江大学5 6 0 21 2 1 5 30 1 10 2 20 3 11 2 12 4 13 4 12 4。

m0_75262437的博客 917

安装liunx出现Entering emergency mode

安装liunx出现Entering emergency mode1.安装centos系统。 1.安装centos系统。 如果过程中出现: Entering emergency mode exit the shell to continue. Type “journalctl” to view system logs. 解决方法: 这时在提示符下输入以下两行命令 cd dev ls 在出现的几列字符...

hell_haita的博客 1万+

PAT: 1003 Emergency

查看题目:1003 Emergency 声明:程序源码并非完美,提交后结果为“部分正确”。因博主看到这个题目网上的答案较少,所以将未完善的代码发出来供大家参考! 本程序采用深度优先搜索算法(DFS),由于递归的调用方式,占用内存过大导致程序提交错误。 #include "pch.h" #include <iostream> using namespace std; ...

weixin_30799995的博客 119

解决centos7中的Welcome to emergency mode

解决centos7中的Welcometoemergencymode!

Andy86666的博客 5547

pat-1003 Emergency

pat-1003 Emergency 一、原题 几个城市,每个城市有一定数量的救援队,输出最短路径的条数,输出在最短的几条路径中,能集结到的最多的救援队数量。 二、思路 使用深度优先遍历。 代码中N,M,C1,C2为原题目中的变量,N-城市数量,M-路的数量,C1-起点,C2-终点 roads-使用二维数组来记录路径长度,teams-记录每个城市的救援队数量 dfs(当前的城市,当前路径的长度,当前累积的救援队数量) 示例遍历顺序: dfs(0,0,1)->dfs(1,1,3)->dfs(2,

Jasmine_xyy的博客 428

8GB 显卡离线修 1080p 视频马赛克:jasna 本地 GPU 修复的显存与耗时账本

jasna 是一个完全跑在本地 GPU 上的视频马赛克修复工具:先检测出马赛克位置,只对它的局部裁剪送时序模型修复,再把结果按 mask 融回原帧。RTX 5090 上,一段 3 分 22 秒的 1080p H.264 素材端到端耗时 34 秒,是 Lada 0.11.0 的 3.6 倍,显存峰值 5.6 GB。本文先对显存这笔账,再逐帧跟踪从检测到回填的完整链路。 ## 显存账本:从 21.4

gitblog_01016的博客 918
上一篇: AtCoder Regular Contest 092-C
下一篇: Counting Leaves
绿蚁.r
博客等级 码龄10年 4粉丝 37原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值