本文详细介绍了如何在VMware环境中配置虚拟网络，包括主机虚拟网络映射设置、Windows下的VMnet1配置及物理网络参数设定，同时涵盖了Linux系统的网络配置步骤。
= vmware configuration =
From menu "edit > virtual networks > host virtual network mapping"
Use VMnet1 to connect the host. Setup its subnet to "192.168.0.0"
= Windows configuraton =
Setup VMnet1 as following
IP Address "192.168.0.11"
Physical Network configuration is
IP Address "192.168.0.10"
DNS "192.168.0.1"
Second DNS "202.96.128.86"
= Linux network configuration =
"System Setup > network"
IP Address "192.168.0.12"
default gateway "192.168.0.1"
DNS "192.168.0.1"
Second DNS "202.96.128.86"
From menu "edit > virtual networks > host virtual network mapping"
Use VMnet1 to connect the host. Setup its subnet to "192.168.0.0"
= Windows configuraton =
Setup VMnet1 as following
IP Address "192.168.0.11"
Physical Network configuration is
IP Address "192.168.0.10"
DNS "192.168.0.1"
Second DNS "202.96.128.86"
= Linux network configuration =
"System Setup > network"
IP Address "192.168.0.12"
default gateway "192.168.0.1"
DNS "192.168.0.1"
Second DNS "202.96.128.86"
扫一扫
1万+
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
