POJ3311——Hie with the Pie

Ubuntu22.04下ROS2与PX4仿真环境搭建全流程解析 本文详细解析了在Ubuntu22.04系统下搭建ROS2与PX4仿真环境的全流程,包括系统准备、ROS2 Humble安装、PX4飞控环境部署、ROS2与PX4通信桥梁搭建等关键步骤。针对常见问题提供了解决方案,并分享了性能优化和开发调试技巧,帮助开发者快速构建无人机仿真开发环境。 阅读详情
Hie with the Pie
Time Limit: 2000MS Memory Limit: 65536K
Total Submissions: 4646 Accepted: 2457

Description

The Pizazz Pizzeria prides itself in delivering pizzas to its customers as fast as possible. Unfortunately, due to cutbacks, they can afford to hire only one driver to do the deliveries. He will wait for 1 or more (up to 10) orders to be processed before he starts any deliveries. Needless to say, he would like to take the shortest route in delivering these goodies and returning to the pizzeria, even if it means passing the same location(s) or the pizzeria more than once on the way. He has commissioned you to write a program to help him.

Input

Input will consist of multiple test cases. The first line will contain a single integer n indicating the number of orders to deliver, where 1 ≤ n ≤ 10. After this will be n + 1 lines each containing n + 1 integers indicating the times to travel between the pizzeria (numbered 0) and the n locations (numbers 1 to n). The jth value on the ith line indicates the time to go directly from location i to location j without visiting any other locations along the way. Note that there may be quicker ways to go from i to j via other locations, due to different speed limits, traffic lights, etc. Also, the time values may not be symmetric, i.e., the time to go directly from location i to j may not be the same as the time to go directly from location j to i. An input value of n = 0 will terminate input.

Output

For each test case, you should output a single number indicating the minimum time to deliver all of the pizzas and return to the pizzeria.

Sample Input

3
0 1 10 10
1 0 1 2
10 1 0 10
10 2 10 0
0

Sample Output

8

Source

East Central North America 2006


经典TSP问题,状压dp外加floyd

#include <map>
#include <set>
#include <list>
#include <stack>
#include <queue>
#include <vector>
#include <cmath>
#include <cstdio>
#include <cstring>
#include <iostream>
#include <algorithm>

using namespace std;

const int inf = 0x3f3f3f3f;
int dp[2100][15];
int floyd[15][15];

int main()
{
	int n;
	while (~scanf("%d", &n), n)
	{
		memset ( floyd, inf, sizeof(floyd) );
		memset ( dp, inf, sizeof(dp) );
		for (int i = 0; i <= n; ++i)
		{
			for (int j = 0; j <= n; ++j)
			{
				scanf("%d", &floyd[i][j]);
			}
		}
		for (int k = 0; k <= n; ++k)
		{
			for (int i = 0; i <= n; ++i)
			{
				for (int j = 0; j <= n; ++j)
				{
					floyd[i][j] = min(floyd[i][j], floyd[i][k] + floyd[k][j]);
				}
			}
		}
		dp[0][0] = 0;
		for (int i = 0; i < (1 << (1 + n)); ++i)
		{
			for (int j = 0; j <= n; ++j)
			{
				for (int k = 0; k <= n; ++k)
				{
					if ( (i & (1 << j)) == 0 )
					{
						dp[i | (1 << j)][j] = min(dp[i | (1 << j )][j], dp[i][k] + floyd[k][j]);
					}
				}
			}
		}
		printf("%d\n", dp[(1 << (n + 1)) - 1][0]);
	}
	return 0;
}


AE(自动曝光)调试策略:曝光曲线设计与过曝控制 自动曝光(AE, Auto Exposure)系统是图像质量控制链路中的核心模块之一,其性能直接决定了成像亮度是否稳定、细节是否完整、场景切换是否自然。在现代移动终端影像系统中,AE 不仅需要适应不同光照强度和复杂环境,还需兼顾人脸优先、HDR触发、视频帧率控制等多目标优化需求。本文基于高通 Snapdragon 和 MTK Dimensity 等主流平台的调试经验,系统梳理了 AE 模型设计原则、曝光曲线配置、测光策略选择与过曝抑制机制,并结合典型实战案例,提供可复制的工程落地路径。 阅读详情

相关推荐

onnxruntime-gpu版本选择与CUDA环境配置实战指南

本文是onnxruntime-gpu版本选择与CUDA环境配置的实战指南。针对AI模型部署中常见的GPU无法调用问题,核心在于确保onnxruntime-gpu版本与系统CUDA Toolkit版本严格匹配。文章详细讲解了如何精准确定CUDA版本、查找官方对应关系、执行正确安装命令,并通过完整测试脚本验证GPU是否成功启用,最后提供了常见问题排查与生产环境调优建议。

weixin_29164091的博客 523

poj 3311 Hie with the Pie

Description The Pizazz Pizzeria prides itself in delivering pizzas to its customers as fast as possible. Unfortunately, due to cutbacks,

喵呜的Blog 1756

LVI-SAM实战:如何在Ubuntu20.04上快速复现激光-视觉-惯性里程计系统

本文详细解析了在Ubuntu 20.04环境下部署和优化LVI-SAM激光-视觉-惯性里程计系统的全流程。从环境配置、依赖安装到源码编译和实战调参,提供了完整的解决方案和性能优化策略,帮助开发者快速实现厘米级精度的实时位姿估计。

m3n5b7v8c9x的博客 1047

poj3311 Hie with the Pie Floyd+状压dp 简单TSP问题

题目链接:http://poj.org/problem?id=3311 描述 Pizazz Pizzeria以其尽快为客户提供比萨饼而自豪。不幸的是,由于削减,他们只能雇用一名司机来完成交付。在开始任何交付之前,他将等待处理1个或更多(最多10个)订单。毋庸置疑,他希望采用最短的路线送上这些好吃的东西,然后回到比萨店,即使这意味着途中不止一次经过同一地点或比萨店。他委托你...

一叶之修的博客 340

Stable-Baselines3性能优化:多环境训练对比指南(DummyVecEnv vs SubprocVecEnv)

本文深入对比了Stable-Baselines3中DummyVecEnv与SubprocVecEnv两种向量化环境的性能差异与应用场景。DummyVecEnv适用于轻量级、步进快的环境,调试友好且开销低;而SubprocVecEnv则通过真正的多进程并行,能显著加速计算密集型环境的训练。文章通过基准测试与决策树,指导开发者根据环境计算成本、CPU核心数等关键因素做出最优选择,以实现训练效率最大化。

weixin_29063979的博客 147

Cadence创建异形焊盘教程(详细操作)

背景:一些常见的矩形/圆形焊盘,设置参数就可。碰到非规则的一些焊盘,那只能用Cadence Allegro PCB来画咯。 一、新建图形 【File】——>【New…】 弹出如下窗口,选择绘制的类型Shape symbol、路径,输入名字 二、设置参数 【Setup】——>【Design Parameters…】 Enhanced display modes:增强型显示模型。全部勾选上。 在【Design】设置单位为mm 设置偏移量(-50,-50) 三、绘制图形 1、找到原点,即参考

qq_42057393的博客 2万+

Hie with the Pie(Floyd 状压DP)

POJ 3311 Hie with the Pie 题目大意 一个披萨店要请司机来送披萨,这家店最多接受10个订单,由于预算的问题,只能雇佣一名司机,要求用最短的时间,从披萨点出发送完最后再回到披萨店(途中可能不止一次经过一个地方)。 输入 测试数据可能有多个,第一行包含一个整数nnn (1≤n≤101 \leq n \leq 101≤n≤10),接下来的n+1n+1n+1行,每行包含n+1n+1...

Psychosocial的博客 530

centos7 清理缓存

一、系统环境 系统版本 CentOS Linux release 7.3.1611 (Core) 内核版本 Linux xx-user 3.10.0-514.el7.x86_64 #1 SMP 背景 服务器分配的账号是普通用户,只能执行sudo命令 二、缓存查看及基本概念 查看内存使用情况 [user01@xx-user ~]$ free -h total used free shared buff/cache availabl

sunzq55的博客 4006

Hie with the Pie(旅行商问题)

Hie with the Pie 题目链接 Description The Pizazz Pizzeria prides itself in delivering pizzas to its customers as fast as possible. Unfortunately, due to cutbacks, they can afford to hire only one driver to do the deliveries. He will wait for 1 or more (up to 1

weixin_47701814的博客 351

【深度学习新浪潮】Qwen3.5-397B-A17B 深度解析与工程部署实战:超大MoE模型的推理加速与落地

Qwen3.5-397B-A17B是当前开源社区综合能力最强、部署效率最高的超大模型,其MoE架构彻底解决了“大模型难部署、慢、贵”的痛点。

专注:太空算力、AI infra、异构调度、大模型成本工程 1709

SkillClaw:让大模型 Agent skill在多用户生态中实现群体进化的框架

随着大模型应用步入深水区,基于 LLM 的智能体(Agent)正从单一的“沙盒玩具”转变为处理真实世界复杂任务的生产力工具。然而,现有的 Agent 系统通常面临一个致命瓶颈——部署即固化。为了解决这一问题,最近有一篇新论文**《SkillClaw: Let Skills Evolve Collectively with Agentic Evolver》**提出了一种多用户生态 Agent 群体进化框架。

kakaZhui的博客 264

Hie with the Pie 动态规划的模板题

Hie with the Pie Problem Description The Pizazz Pizzeria prides itself in delivering pizzas to its customers as fast as possible. Unfortunately, due to cutbacks, they can afford to hire only one driv...

CutieDeng的博客 588

基于sklearn实现LDA主题模型(附实战案例)

目录LDA主题模型1.LDA主题模型原理2.LDA主题模型推演过程3.sklearn实现LDA主题模型(实战)3.1数据集介绍3.2导入数据3.3分词处理 3.4文本向量化3.5构建LDA模型3.6LDA模型可视化 3.7困惑度 其实说到LDA能想到的有两个含义,一种是线性判别分析(Linear Discriminant Analysis),一种说的是概率主题模型:隐含狄利克雷分布(Latent Dirichlet Allocation,简称LDA)。 现在讨论的是主题模型

m0_64336780的博客 2万+

POJ 3311 Hie with the Pie(TSP问题DP解)

题目:Hie with the Pie 题意:从0出发,走n个城市,最后回到0点,求最少花费 分析:状态压缩:dp[i][j]表示在i状态下,当前遍历第j个点的最小值            初始化:dp[1             状态转移:dp[i][j] = min(dp[s][k] + d[k][j]) 其中s是i的子状态,在状态i的基础上,第j位为0的状态           

Must so 798

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

计算机控制技术及应用

《计算机控制技术及应用》通过总结作者的科研成果和吸收国内外的先进理论、方法和技术,以计算机控制系统的网络化、开放化、智能化和集成化发展趋势为主线索,主要介绍计算机控制系统的基本概念和计算机控制系统的典型形式,计算机控制系统的数学描述与基本分析方法,以及数字PID控制器、最少拍控制系统、达林算法、状态变量设计法等设计方法及其各种改进算法。重点突出计算机控制系统输入输出通道接口的设计方法和典型控制系统的设计案例与实现方法等。

Hie with the Pie poj3311

Description The Pizazz Pizzeria prides itself in delivering pizzas to its customers as fast as possible. Unfortunately, due to cutbacks, they can afford to hire only one driver to do the deliveries. H

xtulollipop 581

Statistics and Machine Learning Toolbox

Statistics and Machine Learning Toolbox(带书签),MATLAB统计学习工具

[POJ 3311] Hie with the Pie

这是状压DP中常见的一类问题(TSP问题)(废话) 题目大意: 给你一个n+1个点的有向完全图,现在要你从0号节点出发走过1-n号点至少一次,再返回0号点的最少时间,1<=n<=10 题意分析: 由于题目给出的是有向完全图并且以邻接矩阵的形式给出,所以我们先floyd预处理出最短的路径 设状态dp [ state ] [ i ]表示从0出发,走完state中的所有的点,最后停...

weixin_30435261的博客 149

VC中sqlite的使用

在VC中对sqlite的使用,实现数据库大批数据的快速插入,读取数据库中的数据在ListCtrl中显示

POJ - 3311 Hie with the Pie

题目: The Pizazz Pizzeria prides itself in delivering pizzas to its customers as fast as possible. Unfortunately, due to cutbacks, they can afford to hire only one driver to do the deliveries. He will w...

qq_41998938的博客 186

POJ3311 Hie with the Pie

状压DP+Floyd TSP问题

a free man 607

思科Fat AP配置避坑指南:为什么你设了密码PC还是连不上?

本文深度解析思科Fat AP配置中的七大常见故障点,包括加密类型不匹配、射频接口未激活等,提供详细的排查步骤和解决方案。特别针对组网环境中常见的连接问题,如WPA2/WPA3兼容性、DHCP冲突等,给出专业修复建议,帮助工程师快速定位和解决无线网络部署难题。

weixin_30266885的博客 300

POJ 3311 — Hie with the Pie

原题:http://poj.org/problem?id=3311 题意:从起点0开始,遍历所有的点并回到起点的最短距离,每个点可以经过多次。 思路:先用floyd求出各点之间的最短距离。因为一共是n+1个点(0 — n),所以一共有(1    dp[s][i]表示s状态下到达i的最优解,状态转移方程:dp[s][i] = min(dp[s][i],  dp[s^(1   dp[s^(1

吧唧吧唧 658

【poj3311】Hie with the Pie

题目描述 披萨店给n个地方送披萨,已知各地方(包括披萨店)之间花费的时间,求送完所有地方并回到店花费的最小时间。 输入 第一行:n, n≤10 接下来一个(n+1)*(n+1)的矩阵,0到n每个点之间的距离。 输出 最小时间。 样例输入 3 0 1 10 10 1 0 1 2 10 1 0 10 10 2 10 0 0 样例输出 8 题解 状压dp。...

anweiyun4308的博客 185

POJ 3311 Hie with the Pie

Description The Pizazz Pizzeria prides itself in delivering pizzas to its customers as fast as possible. Unfortunately, due to cutbacks, they can afford to hire only one driver to do the deliveries

XDU_PYL的博客 482

[POJ3311]Hie with the Pie

题目描述Description The Pizazz Pizzeria prides itself in delivering pizzas to its customers as fast as possible. Unfortunately, due to cutbacks, they can afford to hire only one d...

XIN13261615514的博客 126

Hie with the Pie POJ - 3311

http://poj.org/problem?id=3311 状压DP裸题 但是因为每个点可以经过多次 所以要先跑一遍floyd 忘了n++ 数组开小调了半小时。。 #include <cstdio> #include <cstring> #include <algorithm> using namespace std; const int N=0...

sunyutian1998的博客 155

poj3311 Hie with the Pie

Hie with the Pie Time Limit: 2000MS   Memory Limit: 65536K Total Submissions: 3025   Accepted: 1543 Description The Pizazz Pizzeria prides itself in delivering pizzas to

小爱的专栏 785
上一篇: POJ2378——Tree Cutting
下一篇: POJ1741——Tree 基于点的分治
tokers
博客等级 码龄12年 71粉丝 700原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值