rt73无线网卡的配置

/etc/Wireless/RT73STA/rt73sta.dat的配置是十分重要的，在这上面花了很多时间嘿嘿！

[Default]

CountryRegion=0

CountryRegionABand=7

WirelessMode=0

SSID=isassid

NetworkType=Infra      //修改，原来是Adhoc

Channel=7               //根据AP修改

AuthMode=WEPAUTO         //修改

EncrypType=WEP            //加密方式

DefaultKeyID=0            //修改原来是1,修改后Key1生效

Key1Type=0              

Key1Str=                //密码

Key2Type=0

Key2Str=

Key3Type=0

Key3Str=

Key4Type=0

Key4Str=

WPAPSK=abcdefghijklmnopqrstuvwxyz

TxBurst=0

PktAggregate=0

TurboRate=0

WmmCapable=0

AckPolicy=0;0;0;0

BGProtection=0

IEEE80211H=0

TxRate=9                  //根据AP计算调整

RTSThreshold=2347

FragThreshold=2346

PSMode=CAM

TxPreamble=0

AdhocOfdm=0

FastRoaming=0

RoamThreshold=70

iwlist rausb0 scan

Warning: Driver for device rausb0 has been compiled with version 20 of Wireless Extension, while this program supports up to version 17. Some things may be broken...

rausb0    Scan completed :

          Cell 01 - Address: 00:13:46:51:6B:2B

                    ESSID:"isassid"

                    Mode:Managed

                    Channel:7                  //对应修改

                    Encryption key:on

                    Bit Rate:3 Mb/s            //3×8=24MBPS

iwconfig lo        no wireless extensions.

eth0      no wireless extensions.

sit0      no wireless extensions.

Warning: Driver for device rausb0 has been compiled with version 20 of Wireless Extension, while this program supports up to version 17. Some things may be broken...

rausb0    RT73 WLAN  ESSID:"isassid"

          Mode:Managed  Channel=7  Access Point: 00:13:46:51:6B:2B

          Bit Rate=18 Mb/s

          RTS thr:off   Fragment thr:off

          Encryption key:1111-1111-11

          Link Quality=40/100  Signal level:-76 dBm  Noise level:-115 dBm

          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0

这就说明成功的加入了AP.

ping 192.168.0.1

PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.

64 bytes from 192.168.0.1: icmp_seq=0 ttl=255 time=3.99 ms