STL常用的算法和生成器

C/C++ 专栏收录该内容
¥59.90 ¥99.00
161篇文章

STL常用的算法和生成器

STL(Standard Template Library)是C++标准库中一个重要的组成部分,它提供了一系列的通用算法和数据结构,方便开发者进行快速的应用程序开发。在STL中,算法和生成器是两个核心概念,它们为我们提供了丰富的功能和灵活的操作,本文将介绍STL中常用的算法和生成器,并提供相应的源代码示例。

算法(Algorithms)

STL中的算法是指一系列操作序列的函数模板,它们实现了各种常见的计算任务,如查找、排序、变换等。下面是几个常用的STL算法:

  1. find:在指定范围内查找指定值的元素,并返回其迭代器。
#include <algorithm>
#include <iostream>
【深圳】IBM V3500存储维修 更换控制器故障 今天给大家分享的是深圳.福田区一个电商客户公司一台IBM Storwize v3500存储控制器故障从远程诊断 收集日志 分析结果的实际案例,如图所示通过存储管理口登陆进去后直接看到少了一个控制器,经过工程师分析日志后判定为该控制器损坏,接下来更换控制器配件,标准套件的控制器不带子卡和电池,所以需要把故障控制器上的子卡和电池拆下来装到新控制器上,这个电池拆还需要点技巧,接着把新的控制器插回V3500主机,等待大约十分钟后,新控制器指示灯全绿,管理界面看到节点已联机;冠峰科技-爱科技爱分享。 阅读详情

相关推荐

【Collibra 驱动 IPD 数据血缘治理】:三层图谱分层展示体系与全链路追踪的技术业务实践

(应用级/数据级/字段级)是理解复杂数据流动的核心手段。其价值不仅体现在可视化的直观性,更在于通过。技术保障血缘不可篡改性,进一步提升IPD数据治理的可靠性。,解决了跨层级血缘分析的性能与可用性矛盾。数据血缘图谱要素定义(字节跳动/腾讯云/信安标委)实现对IPD数据的精准追踪,而数据血缘图谱的。分层交互设计标准(智慧城市数据中台规范)Collibra技术文档(2024)字段级血缘的挑战与解决路径。自动优化血缘路径,并深化。字段级血缘技术实现方案。Collibra通过。图数据库性能优化原理。

百态·数智思维 | 聚焦大数据、量化与未来AI 1244

ZEMAX学习 6.一个照相物镜的设计

曲线越平滑表示场曲越小,曲线越接近水平,系统边缘与中心对比度越接近,虚实越接近表示色差和色散越好;第1个面设计不合理,出现前后表面相交的情况,点击第1面厚度,选择边缘厚度,设置为0.1,第1面厚度被控制在0.1mm厚,系统根据这一设置始终保持第1面边缘厚度为0.1mm。要求:设计一个照相物镜,焦距f=9mm,F#为4,视场角40°;添加有效焦距操作数EFFL 9mm 权重为1,设置优化变量,如下图,ctrl+shift+o打开优化界面。报告中系统数据有效焦距为67.381mm,设计要求为9mm;

qq_24542783的博客 4715

MPLAB修改工程名称方法

修改工程名称方法 如下图所示,工程名称为:Loar_V1.0_20210205 现将该工程名称修改为:Loar_V1.1_20210205 修改方法: ①找到工程文件路径,将工程名称修改为Loar_V1.1_20210205 注意:此时打开变成进行编译,会报错:Loar_V1.1_20210205.production.hex does not exist or is not an executable, ②找到工程下的 nbproject 文件夹 ③将nbproject文件夹下的文件全部打开,并且将

qq_26195179的博客 1762

workbench谐响应

定义材料 打开Engineering Data定义材料,在分析时不同部分选择不同材料 建模 打开Geometry建模,我举的例子很简单就一根光秃秃的轴 因为要加轴承,在轴上创建imprint face 因为要用point mass代替轴上原来的盘,在轴上盘的位置新建一个Plane,用Slice方法将轴从XYPlane3分成两段 施加边界条件以及谐响应分析 打开Model 1.在两段轴的交界面处,创建Point Mass,输入质量与转动惯量,位置在轴线上 2.mass point promote to.

my blogs include programming, math, physics.回首过去,放眼未来。 leslielee.blog.youkuaiyun.com 5888

LSM6DS3TR-C IMU传感器入门:从MEMS原理到姿态解算实战

惯性测量单元(IMU)是现代智能设备实现运动感知的核心部件,其基础原理基于微机电系统(MEMS)技术。MEMS加速度计通过检测质量块在惯性力作用下的位移来测量线性加速度,而陀螺仪则利用科里奥利力效应感知角速度。这种技术使得微型化、低成本的6自由度运动测量成为可能,为机器人、无人机、可穿戴设备等提供了关键的空间姿态和运动状态信息。在实际工程中,开发者需要掌握I2C/SPI通信协议、传感器数据读取与校准,并通过互补滤波等算法融合加速度计和陀螺仪数据,实现稳定的姿态解算。LSM6DS3TR-C作为一款高性价比的6

weixin_28684655的博客 598

python机器人编程——用pytorch实现六轴机械臂的正向和逆向数值解算,及python算法解析

前面对六轴(或多轴)机械臂进行了一些研究,特别是利用几何进行简化,实现逆解,来完成比较简单的搬用任务。然而,如果需要比较精确的操作任务,可能需要更加复杂的机械臂解算。其中比较复杂的是数值解算,这种解算往往涉及到比较复杂的机器人运动等原理知识,比较难以上手。但是,python的生态挺全面,已经有很多牛人实现了数值解法,但是去看他们的代码,还是觉得费劲。此外,随着深度神经网络的兴起,很多是用建立深度学习神经网络,去利用机械臂输入输出的大数据,训练机械臂的控制模型,这个上手也比较慢。

JAMES费的空间 5798

Halcon相机标定实战:从参数设置到精度优化全解析

本文详细解析Halcon相机标定的全流程,从基础概念到实战技巧,涵盖参数设置、精度优化及常见问题解决方案。通过实际案例和代码示例,帮助读者掌握工业视觉项目中相机标定的关键技术,提升测量精度和系统稳定性。

weixin_29279153的博客 323

别把 ABAP 时间戳当数字算:TIMESTAMP / TIMESTAMPL 的语义、正确用法与项目级避坑指南

ABAP时间戳使用指南与常见陷阱 摘要:ABAP中的时间戳(TIMESTAMP/TIMESTAMPL)本质是UTC时间的数字表示,而非累计秒数。正确用法包括:直接比较时间戳顺序、使用CONVERT TIME STAMP进行时区转换、通过CL_ABAP_TSTMP计算时间差。关键注意事项:绝对不要对时间戳本身进行数学运算,否则会导致非法时间值。实际项目中需特别注意SAP Gateway的ETag处理、跨时区系统集成和CDS视图中的时间戳使用场景,避免将本地时间误存为UTC时间戳或在云迁移时产生时区问题。(14

2007 年 ~ 2025 年,深耕 SAP 技术 18 年 347

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

jre9下载 jdk9

(Java SE Runtime Environment 9.0) 9.0u175 官方最新版 【x86|x64】

SAP B1中文培訓教材_SDK

公司内部培训资料,对开发工具 ,DIAPI, UIAPI,Add-ON有详细解说

android 蓝牙通讯demo

android 下蓝牙通讯demo,实现了发现蓝牙,使能蓝牙,通过蓝牙发送消息。

上一篇: C语言格式化输入输出:scanf()和printf()
下一篇: 使用OpenGL实现高动态范围(HDR)渲染
普通网友
博客等级 码龄3年 162粉丝 0原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符  | 博主筛选后可见
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值