rsync实时同步

rsync是Linux下的数据镜像备份工具,它能远程和本地同步数据,并智能对比差异仅同步变化部分。支持ssh和rsync协议,保持文件权限、时间等属性。本文介绍了rsync的特性、常用选项及部署方法。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

rsync实时同步

一、简介

rsync是Linux系统下的数据镜像备份工具。

从字面意思上,rsync 可以理解为 remote sync(远程同步),但它不仅可以远程同步数据(类似于 scp 命令),还可以本地同步数据(类似于 cp 命令)。不同于 cp 或 scp 的一点是,使用 rsync 命令备份数据时,不会直接覆盖以前的数据(如果数据已经存在),而是先判断已经存在的数据和新数据的差异,只有数据不同时才会把不相同的部分覆盖。

rsync命令来同步系统文件之前要先登录remote主机认证,认证过程中用到的协议有2种:

  • ssh协议
  • rsync协议

二、特性

  1. 可以镜像保存整个目录树和文件系统;
  2. 可以很容易做到保持原来文件的权限、时间、软硬链接等等;
  3. 无须特殊权限即可安装;
  4. 快速:第一次同步时rsync会复制全部内容,但在下一次只传输修改过的文件。rsync在传输数据的过程中可以实行压缩及解压缩操作,因此可以使用更少的带宽;
  5. 安全:可以使用scp、ssh等方式来传输文件,当然也可以通过直接的socket连接;
  6. 支持匿名传输,以方便进行网站镜像;

三、rsync常用选项

选项作用
-a, --archive归档
-v, --verbose啰嗦模式
-q, --quiet静默模式
-r, --recursive递归
-p, --perms保持原有的权限属性
-z, --compress在传输时压缩,节省带宽,加快传输速度
–delete在源服务器上做的删除操作也会在目标服务器上同步

四、部署

环境说明:

服务器类型IP地址主机名操作系统
源服务器192.168.183.135servercentos7/redhat7及以上
目标服务器192.168.183.138clientcentos7/redhat7及以上

目标服务器操作

//关闭防火墙和selinux
[root@192~]# systemctl disable --now firewalld
Removed /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
[root@192~]# setenforce 0
[root@192~]# getenforce 
Permissive
[root@192~]# sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config

//安装rsync
[root@192~]# dnf install -y rsync rsync-daemon

//设置rsyncd.conf配置文件
[root@192~]# cat >> /etc/rsyncd.conf <<EOF
> log file = /var/log/rsyncd.log	//日志文件位置,启动rsync后自动产生这个文件,无需提前创建
> pidfile = /var/run/rsyncd.pid		//pid文件的存放位置
> lock file = /var/run/rsync.lock	//支持max connections参数的锁文件
> secrets file = /etc/rsync.pass	//用户认证配置文件,里面保存用户名称和密码,必须手动创建这个文件
> 
> [etc_from_client]		//自定义同步名称
> path = /tmp/		//rsync服务端数据存放路径,客户端的数据将同步至此目录
> comment = sync etc from client
> uid = root	//设置rsync运行权限为root
> gid = root	//设置rsync运行权限为root
> port = 873	//默认端口
> ignore errors		//表示出现错误忽略错误
> use chroot = no	//默认为true,修改为no,增加对目录文件软链接的备份
> read only = no	//设置rsync服务端为读写权限
> list = no		//不显示rsync服务端资源列表
> max connections = 200		//最大连接数
> timeout = 600		//设置超时时间
> auth users = admin	//执行数据同步的用户名,可以设置多个,用英文状态下逗号隔开
> hosts allow = 192.168.183.135		//允许进行数据同步的客户端IP地址,可以设置多个,用英文状态下逗号隔开
> hosts deny = 192.168.1.1		//禁止数据同步的客户端IP地址,可以设置多个,用英文状态下逗号隔开
> EOF

//创建用户认证文件
[root@192~]# echo 'admin:123456' > /etc/rsync.pass
[root@192~]# cat /etc/rsync.pass
admin:123456
[root@client ~]# 


//设置文件权限
[root@192~]# chmod 600 /etc/rsync*
[root@192~]# ll /etc/rsync*
-rw-------. 1 root root  13 Sep 22 18:17 /etc/rsync.pass
-rw-------. 1 root root 843 Sep 22 18:11 /etc/rsyncd.conf

//启动rsync并设置开机自启
[root@192~]# systemctl enable --now rsyncd
Created symlink /etc/systemd/system/multi-user.target.wants/rsyncd.service → /usr/lib/systemd/system/rsyncd.service.
[root@192~]# ss -antl
State    Recv-Q   Send-Q     Local Address:Port     Peer Address:Port  Process  
LISTEN   0        128              0.0.0.0:22            0.0.0.0:*              
LISTEN   0        5                0.0.0.0:873           0.0.0.0:*              
LISTEN   0        128                 [::]:22               [::]:*              
LISTEN   0        5                   [::]:873              [::]:*              
[root@192~]# 

源服务器操作

//关闭防火墙和selinux
[root@server ~]# systemctl disable --now firewalld
Removed /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
[root@server ~]# setenforce 0
[root@server ~]# sed -ri 's/^(SELINUX=).*/\1disabled/g' /etc/sysconfig/selinux
[root@server ~]# getenforce
Permissive

//配置yum源
[root@server ~]# curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-vault-8.5.2111.repo
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  2495  100  2495    0     0   8693      0 --:--:-- --:--:-- --:--:--  8663
[root@server ~]# sed -i -e '/mirrors.cloud.aliyuncs.com/d' -e '/mirrors.aliyuncs.com/d' /etc/yum.repos.d/CentOS-Base.repo
[root@server ~]# ls /etc/yum.repos.d/
CentOS-Base.repo
[root@server ~]# dnf -y install epel-release

//安装rsync
[root@server ~]# dnf -y install rsync

//创建认证密码文件
[root@server ~]# echo '123456' > /etc/rsync.pass
[root@server ~]# cat /etc/rsync.pass
123456

//设置文件权限,只设置文件所有者具有读取、写入权限即可
[root@server ~]# chmod 600 /etc/rsync.pass
[root@server ~]# ll /etc/rsync.pass 
-rw-------. 1 root root 7 Sep 22 18:25 /etc/rsync.pass

//在源服务器上创建测试目录,然后在源服务器运行以下命令
[root@server ~]# mkdir -pv /root/etc/george
mkdir: created directory '/root/etc'
mkdir: created directory '/root/etc/george'
[root@server ~]# rsync -avH --port 873 --progress --delete /root/etc/ admin@192.168.183.138::etc_from_client --password-file=/etc/rsync.pass
sending incremental file list
deleting vmware-root_901-3988228452/
./
george/

sent 79 bytes  received 58 bytes  91.33 bytes/sec
total size is 0  speedup is 0.00
[root@server ~]# 


//运行完成后,在目标服务器上查看,在/tmp目录下有test目录,说明数据同步成功
[root@192~]# ls /tmp/
george


//安装inotify-tools工具,实时触发rsync进行同步
//查看服务器内核是否支持inotify
[root@server ~]# ll /proc/sys/fs/inotify/
total 0
-rw-r--r--. 1 root root 0 Sep 22 18:30 max_queued_events
-rw-r--r--. 1 root root 0 Sep 22 18:30 max_user_instances
-rw-r--r--. 1 root root 0 Sep 22 18:30 max_user_watches
[root@server ~]# 
//如果有这三个max开头的文件则表示服务器内核支持inotify

//安装inotify-tools
[root@server ~]# dnf -y install inotify-tools

//写同步脚本,让脚本自动去检测我们制定的目录下文件发生的变化,然后再执行rsync的命令把它同步到目标服务器
[root@server ~]# mkdir /scripts
[root@server ~]# touch /scripts/inotify.sh
[root@server ~]# chmod 755 /scripts/inotify.sh
[root@server ~]# ll /scripts/inotify.sh
-rwxr-xr-x. 1 root root 0 Sep 22 18:33 /scripts/inotify.sh
[root@server ~]# vi /scripts/inotify.sh
host=192.168.183.138	//目标服务器的ip(备份服务器)
src=/etc	//在源服务器上所要监控的备份目录(此处可以自定义,但是要保证存在)      
des=etc_from_client 	//自定义的模块名,需要与目标服务器上定义的同步名称一致    
password=/etc/rsync.pass   	 //执行数据同步的密码文件 
user=admin     //执行数据同步的用户名
inotifywait=/usr/bin/inotifywait

$inotifywait -mrq --timefmt '%Y%m%d %H:%M' --format '%T %w%f%e' -e modify,delete,create,attrib $src \
| while read files;do
    rsync -avzP --delete  --timeout=100 --password-file=${password} $src $user@$host::$des
    echo "${files} was rsynced" >>/tmp/rsync.log 2>&1
done

//启动脚本
[root@server ~]# /scripts/inotify.sh &
[1] 101557
[root@server ~]# ps -ef | grep inotify
root      101558  101557  0 18:37 pts/0    00:00:00 /usr/bin/inotifywait -mrq --timefmt %Y%m%d %H:%M --format %T %w%f%e -e modify,delete,create,attrib /etc
root      101923    3154  0 18:37 pts/0    00:00:00 grep --color=auto inotify
[root@server ~]# 


//在源服务器上生成一个新文件
[root@server etc]# echo 'hello world!' > /etc/opt/george
[root@server etc]# tail /tmp/rsync.log
20220923 10:42 /etc/opt/georgeCREATE was rsynced
20220923 10:42 /etc/opt/georgeMODIFY was rsynced

设置脚本开机自启

[root@server ~]# chmod +x /etc/rc.d/rc.local
[root@server ~]# ll /etc/rc.d/rc.local
-rwxr-xr-x. 1 root root 474 Jan 28  2022 /etc/rc.d/rc.local
[root@server ~]# echo 'nohup /bin/bash /scripts/inotify.sh' >> /etc/rc.d/rc.local
[root@server ~]# tail /etc/rc.d/rc.local
#
# In contrast to previous versions due to parallel execution during boot
# this script will NOT be run after all other services.
#
# Please note that you must run 'chmod +x /etc/rc.d/rc.local' to ensure
# that this script will be executed during boot.

touch /var/lock/subsys/local

nohup /bin/bash /scripts/inotify.sh
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值