vue props传Array/Object类型值,子组件报错解决办法

Invalid default value for prop "data": Props with type Object/Array must use a factory function to r   问题:   大致意思是Object/Array类型的Props必须使用工厂函数返回默认值。   问题定位:     解决办法: 将默认的值以函数的方式进行返回  ... 阅读详情

当在父组件通过props传Array/Object类型值给子组件的时候,如果子组件的props接收default为
exampleData:{
type:Array,
default:[]
}
时,系统会报错Invalid default value for prop "slides": Props with type Object/Array must use a factory function to return the default value.提示Array/Object的默认返回值要用工厂形式返回。所以我们要这么来写

exampleData:{ 
    type:Array, 
    default:function(){
        return [];//或者是return {}
    }
}

在项目中遇到的坑,做个笔记记录一下。

TwinCAT 3 实战:手把手教你用PLC和C++读写第三方伺服驱动器的CoE参数 本文详细介绍了在TwinCAT 3环境中通过PLC和C++两种技术路线实现对第三方伺服驱动器CoE参数的精准操控。从环境准备到具体实现,包括硬件配置、核心函数使用及性能优化策略,为工程师提供了全面的实战指南。特别针对CoE参数访问的效率和稳定性问题,给出了实用的调试技巧和异常处理方案。 阅读详情

相关推荐

手把手教你用思岚RPLIDAR C1激光雷达实现简单环境扫描(树莓派4B+Ubuntu22.04)

本文详细介绍了如何在树莓派4B(Ubuntu 22.04系统)上驱动思岚RPLIDAR C1激光雷达,从硬件连接、权限配置、SDK编译到运行示例程序,最终实现环境扫描数据的可视化。通过手把手教程,帮助开发者和爱好者快速上手激光雷达应用,构建简单的环境扫描图。

j2k3l4的博客 1138

Props with type Object/Array must use a factory function to return the default value.

问题描述: 报错:Props with type Object/Array must use a factory function to return the default value. 使用 prop 进行父子组件传值时,设置了默认值(如下),导致报上边的错 props: { actData: { type: Object, default: {}, }, }, 报错原因 翻译报错信息:props default 数组/对象的默认值应当由一个工厂函数返回 解决

卡卡西:一个擅长拷贝的前端程序员 1万+

树莓派部署Home Assistant:打造本地化智能家居大脑

家庭自动化旨在通过技术提升居住便利性与舒适度,其核心在于中枢控制系统对各类设备的统一调度。传统云端方案虽部署简便,但存在隐私泄露、网络依赖与生态壁垒等固有缺陷。本地化部署通过将控制逻辑与数据存储于家庭内部网络,从根本上解决了这些问题,实现了数据自主、离线可用与跨品牌联动。Home Assistant作为领先的开源家庭自动化平台,结合树莓派这一低功耗、高性价比的硬件载体,为构建私有、可靠的智能家居中枢提供了成熟方案。本文以树莓派4B为例,详细阐述了从系统安装、设备集成到自动化场景创建的完整实践流程,并深入探讨

weixin_33501543的博客 376

[Vue warn] : Props with type Object/Array must use a factory function to return the default value.

报错: [Vue warn]: Invalid default value for prop “obj”: Props with type Object/Array must use a factory function to return the default value. 大概意思就是 提示Array/Object的默认返回值要用工厂形式返回。 解决方法: 将原先的 props:{ obj: { type: Object, default: {} } },

wu_yans的博客 1183

别再死记公式了!用HFSS/CST手把手教你仿真一个2.4GHz WiFi的PIFA天线(附参数调试技巧)

本文详细介绍了使用HFSS和CST仿真软件设计2.4GHz WiFi PIFA天线的全流程,包括建模准备、分步操作指南和参数调试技巧。通过可视化结果和实战案例,帮助工程师快速掌握天线设计的关键参数优化方法,提升辐射性能和工作效率。

weixin_31682031的博客 336

树莓派安装snowboy

1、树莓派换源 参考链接:https://blog.youkuaiyun.com/qq_43556844/article/details/113615915 2、更新pip3 参考链接:https://blog.youkuaiyun.com/qq_43556844/article/details/113616214 3、存取麦克风 我们使用PortAudio作为音频输入/输出的跨平台支持。我们还使用sox作为快速实用程序来检查麦克风设置是否正确。 sudo apt-get install python-pyaudio python

qq_43556844的博客 1923

【vue】prop 进行父子组件传值Props with type Object/Array must use a factory function to return the default val

【vue】prop 进行父子组件传值Props with type Object/Array must use a factory function to return the default val

SunPeng的博客 2366

STC15W204S最小系统开发指南:从串口通讯到自动热加载全流程

本文详细介绍了STC15W204S最小系统的完整开发流程。从芯片资源解析、最小系统搭建、串口通讯驱动编写(使用Timer2生成波特率),到实现基于魔术值触发的自动热加载功能,并最终集成Keil与STC-ISP软件,构建高效的自动化开发工作流,显著提升嵌入式调试效率。

a1b2c的博客 397

vue props传Array/Object类型值,子组件报错解决办法(已解决)

转自: https://blog.youkuaiyun.com/Nalaluky/article/details/82746875 问题: Props with type Object/Array must use a factory function to return the default va...

阿飞 4693

simulink的Sine Wave 模块详解

模块是 Simulink 中的一个信号源模块,用于生成正弦波信号。该模块可以根据设定的幅值、频率、相位和偏移量,在仿真过程中产生周期性的正弦波形。模块都能提供强有力的支持。通过深入了解其参数的影响及结合 MATLAB 脚本的应用,读者可以更加有效地利用这一模块进行仿真和研究。此外,通过实际应用场景的扩展以及常见问题解答部分的帮助,能够更好地掌握。模块是一个非常实用的工具,适用于需要生成正弦波信号的各种场景。模块的参数,可以进一步增强学习体验。模块参数的影响,下面我们将详细探讨每个参数如何影响仿真结果。

xiaoheshang_123的博客 1052

C# 上位机 YOLO 实战:从数据采集到目标识别的全流程拆解

本文以工业螺栓缺陷检测为例,完整拆解了C#上位机+YOLO从数据采集到目标识别的全流程。数据采集:保证图像质量,线程安全采集,必要时归档数据;预处理:适配YOLO模型输入格式,复用对象减少内存开销;推理解析:正确解析张量结果,过滤低置信度目标;落地环节:可视化展示结果,实现工业交互和日志记录。

这里只有干货:从 Modbus 通信到 MES 对接,从 YOLO 训练到工控机部署,带你搞定工业软件开发全流程。 1457

vue组件object_解决vue props传Array/Object类型值,子组件报错的情况

问题:Props with type Object/Array must use a factory function to return the default value.1、在vue中如果当在父组件通过props传Array/Object类型值给子组件的时候2、如果子组件的props接收default为 ,如下报错原因:props default 数组/对象的默认值应当由一个工厂函数返回解决...

weixin_39948111的博客 1613

使用 MATLAB/Simulink + Simscape Electrical 构建一个他励直流电机的启动与制动过程仿真模型

直流电机在工业控制、电动车辆、自动化设备中广泛应用。其中,他励直流电机(Separately Excited DC Motor)因其励磁绕组与电枢绕组分别供电,具有良好的调速性能和启动特性,常用于需要平稳启动和精确控制的场合。在实际应用中,电机的启动过程和制动过程对电网、机械系统以及电机本身都具有重要影响。因此,仿真分析他励直流电机的启动与制动特性,是电机控制设计的重要环节。本文将详细介绍如何使用构建一个他励直流电机的启动与制动过程仿真模型,并通过仿真分析其动态响应。本文详细介绍了如何使用构建一个。

amy_mhd的博客 233

解决vue props传Array/Object类型值,子组件报错的情况

项目场景: Props with type Object/Array must use a factory function to return the default value. 问题描述 解决vue props传Array/Object类型值,子组件报错的情况 props:{ projectTypes: { type: Array, default: [] } } 或者 props:{ projectTypes: { type: Object, de

m0_46569495的博客 1891

Statistics and Machine Learning Toolbox

Statistics and Machine Learning Toolbox(带书签),MATLAB统计学习工具

Data-Structures-and-Algorithm-Analysis-in-Java.pdf

作者: Weiss, Mark A. 出版社: Addison Wesley Data Structures and Algorithm Analysis in Java is an “advanced algorithms” book that fits between traditional CS2 and Algorithms Analysis courses. In the old ACM Curriculum Guidelines, this course was known as CS7. This text is for readers who want to learn good programming and algorithm analysis skills simultaneously so that they can develop such programs with the maximum amo...

Vue--Props with type Object/Array must use a factory function to return the default value.

Vue--Props with type Object/Array must use a factory function to return the default value.问题描述解决办法 问题描述 今天在学习小马哥的购物车demo时发生该问题,翻译下标蓝的提示信息,我们可以知道如果props类型为Object/Array 则use a factory function to return the default value,同时网上也有参考大佬们的解决办法❤,在此记录下 解决办法 //

有一颗前端心的后端开发小哥 3万+

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

关于Vue父子组件传值(复杂数据类型的值)的细节点

vue 父子组件传值是很常见的,多数情况下都是父传递给子的值是基础数据类型,如string,number,boolean, 当父组件值被修改时,子组件能够实时的作出改变。 如果父子传值的类型是复杂数据类型(object,array)这种时, 1.通常的做法是在子组件监听props属性 <!--父组件--> <div class="parent"> ...

ForDas0325的博客 1304

大中型超市收银系统(可直接运行)

光步前台收银系统系统功能:商品销售、商品退货、挂单、收银员权限、会员销售、单品取消、整单取消、商品查询、脱机销售、脱机数据上传,基本资料下载,开钱箱、小票打印、收款结算,支持多币种付款方式(现金、储值卡、礼券、微信等),支持多种促销。运行环境:.net 4.0登陆信息用户名:1001 密码:123456内置商品信息,商品编码可输入00001000 - 00010000,测试效果相关功能键F5 结算 F9挂单 F11商品查询 F8退货 Insert单品取消 Del整单取消 F12开钱箱F2 会员 Ctrl+Z退出系统 Home 锁屏 相关源码待公开

Vue报错 Invalid default value for prop “XX“: Props with type Object/Array must...问题解决

Vue使用Props传值时报错Invalid default value for prop "proList": Props with type Object/Array must use a factory function to return the default value.解决方法

Gqiangqiang的博客 2万+

Vue2在子组件改变父组件传入props值三种方法(利用Vue的设计漏洞实现双向同步)

前言 很多情况下,我们更需要传入子组件 props 的值(也就是父组件中的值)是一个双向的,也就是说子组件更改时,父组件也伴随更改。 特别是当子组件使用了某些第三方 UI 组件库的时候,在子组件内进行了 v-model 双向绑定,而该值又需父组件传入 props 进行依赖,于是当第三方组件事件被触发导致 v-model 值发生改变,就产生了冲突,因为此时父级传入的 props 不可更改。 下面简单说明三种解决的方法。 v-bind:sync 这是官网推荐的方法,当子组件需要更改父级传入的 props 时,调

幻日のヨハネ 1万+

vue子组件设置默认值为Object或者Array时,报错Invalid default value for prop “XXX“: Props with type Object/Array

vue子组件设置默认值为Object或者Array时,报错Invalid default value for prop “XXX”: Props with type Object/Array,翻译为[Vue warn]:属性“XXX”的默认值无效:类型为Object/Array的道具必须使用工厂函数返回默认值。如下 此类问题原因在于Props在设置默认值default时若值类型为Object或者Array时不能直接default而是需要使用函数通过return将值返回出来才可以,如下 1. 错误写法 li

aBingNa的博客 2061

object vue 转数组_解决vue props传Array/Object类型值,子组件报错的情况

问题:Props with type Object/Array must use a factory function to return the default value.1、在vue中如果当在父组件通过props传Array/Object类型值给子组件的时候2、如果子组件的props接收default为 ,如下报错原因:props default 数组/对象的默认值应当由一个工厂函数返回解决...

weixin_34394265的博客 484

Vue子组件内的props对象参数配置

Vue子组件内的props对象参数配置 目录 一、简单数据类型 1、布尔类型 Boolean 2、数字类型 Number 3、字符串类型 String 二、复杂数据类型 1、数组 Array 2、对象 Object 3、函数 Function 这篇文章主要介绍了 Vue 子组件内的props 对象里的 default 参数是如何定义 Array 、Object 、或 Function 默认值的正确写法说明,具有很好的参考价值

Mr.小灰狼_随笔 4982

vue props传Array类型值,子组件报错解决

添加链接描述

weixin_44845483的博客 1627
上一篇: vue项目 设置scrollTop不起作用 总结
下一篇: vue2.x集成百度UEditor富文本编辑器方法
Coding_Jia
博客等级 码龄10年 18粉丝 11原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值