PS E:\esp32\esp32_spi_slave(more_slave)00> pio run -t clean
Processing esp32s3 (platform: espressif32 @ ~6.9.0; board: esp32-s3-devkitc-1; framework: arduino)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Verbose mode can be enabled via `-v, --verbose` option
[OVERRIDE] 正在强制覆盖 BLE 最大连接数配置...
[OVERRIDE] 已设置 CPPDEFINES: [('CONFIG_BT_ACL_CONNECTIONS', '8'), ('CONFIG_BT_CTRL_BLE_MAX_ACT', '8'), ('CONFIG_BT_BTC_MAX_CONN', '8'), ('CONFIG_BT_GATTC_MAX_CONN', '8'), ('CONFIG_BT_GATT_MAX_SR_PROFILES', '8')]
Removing .pio\build\esp32s3
Done cleaning
================================================================== [SUCCESS] Took 3.22 seconds ==================================================================
PS E:\esp32\esp32_spi_slave(more_slave)00> pio run
Processing esp32s3 (platform: espressif32 @ ~6.9.0; board: esp32-s3-devkitc-1; framework: arduino)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Verbose mode can be enabled via `-v, --verbose` option
[OVERRIDE] 正在强制覆盖 BLE 最大连接数配置...
[OVERRIDE] 已设置 CPPDEFINES: [('CONFIG_BT_ACL_CONNECTIONS', '8'), ('CONFIG_BT_CTRL_BLE_MAX_ACT', '8'), ('CONFIG_BT_BTC_MAX_CONN', '8'), ('CONFIG_BT_GATTC_MAX_CONN', '8'), ('CONFIG_BT_GATT_MAX_SR_PROFILES', '8')]
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32-s3-devkitc-1.html
PLATFORM: Espressif 32 (6.9.0) > Espressif ESP32-S3-DevKitC-1-N8 (8 MB QD, No PSRAM)
HARDWARE: ESP32S3 240MHz, 320KB RAM, 8MB Flash
DEBUG: Current (esp-builtin) On-board (esp-builtin) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES:
- framework-arduinoespressif32 @ 3.20017.241212+sha.dcc1105b
- tool-esptoolpy @ 1.40501.0 (4.5.1)
- toolchain-riscv32-esp @ 8.4.0+2021r2-patch5
- toolchain-xtensa-esp32s3 @ 8.4.0+2021r2-patch5
LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Found 38 compatible libraries
Scanning dependencies...
Dependency Graph
|-- SPI @ 2.0.0
|-- ArduinoJson @ 6.21.5
|-- Adafruit BusIO @ 1.16.1
|-- Adafruit GFX Library @ 1.11.11
|-- ESP32SPISlave @ 0.6.3
|-- WiFi @ 2.0.0
|-- ESP32 BLE Arduino @ 2.0.0
|-- HTTPClient @ 2.0.0
|-- WebServer @ 2.0.0
Building in release mode
Compiling .pio\build\esp32s3\src\BLEClient.cpp.o
Compiling .pio\build\esp32s3\src\esp_uart_driver.cpp.o
Compiling .pio\build\esp32s3\src\main.cpp.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEDevice.h:10,
from src/BLEClient.h:4,
from src/BLEClient.cpp:1:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEDevice.h:10,
from src/BLEClient.h:4,
from src/BLEClient.cpp:1:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\src\network.cpp.o
Compiling .pio\build\esp32s3\src\network_app.cpp.o
Compiling .pio\build\esp32s3\src\network_tcp_client.cpp.o
Compiling .pio\build\esp32s3\src\network_tcp_server.cpp.o
Compiling .pio\build\esp32s3\src\spi_slave_server.cpp.o
Compiling .pio\build\esp32s3\src\tcp_server.cpp.o
Compiling .pio\build\esp32s3\src\uart_msg_analy.cpp.o
Building .pio\build\esp32s3\bootloader.bin
Generating partitions .pio\build\esp32s3\partitions.bin
esptool.py v4.5.1
Creating esp32s3 image...
Merged 1 ELF section
Successfully created esp32s3 image.
Compiling .pio\build\esp32s3\lib050\SPI\SPI.cpp.o
Compiling .pio\build\esp32s3\lib819\Wire\Wire.cpp.o
Compiling .pio\build\esp32s3\libe3a\Adafruit BusIO\Adafruit_BusIO_Register.cpp.o
src/uart_msg_analy.cpp: In function 'void uart0_msg_analy(uint8_t*, uint16_t)':
src/uart_msg_analy.cpp:37:84: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
printf_log_hex("uart0_rx_buf:",(uint8_t *)uart0_rx_buf,uart0_rx_buf_cnt);
^
Compiling .pio\build\esp32s3\libe3a\Adafruit BusIO\Adafruit_I2CDevice.cpp.o
Compiling .pio\build\esp32s3\libe3a\Adafruit BusIO\Adafruit_SPIDevice.cpp.o
Compiling .pio\build\esp32s3\lib405\Adafruit GFX Library\Adafruit_GFX.cpp.o
Compiling .pio\build\esp32s3\lib405\Adafruit GFX Library\Adafruit_GrayOLED.cpp.o
Compiling .pio\build\esp32s3\lib405\Adafruit GFX Library\Adafruit_SPITFT.cpp.o
Archiving .pio\build\esp32s3\lib050\libSPI.a
Compiling .pio\build\esp32s3\lib405\Adafruit GFX Library\glcdfont.c.o
Compiling .pio\build\esp32s3\libe4a\WiFi\WiFi.cpp.o
Compiling .pio\build\esp32s3\libe4a\WiFi\WiFiAP.cpp.o
src/network_tcp_server.cpp: In member function 'uint16_t Network_TCP_Server::client_process(WiFiClient*&)':
src/network_tcp_server.cpp:121:69: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
printf_log_hex("client rev:", data_char, datalen); // 说明接收到的数据
^
Compiling .pio\build\esp32s3\libe4a\WiFi\WiFiClient.cpp.o
Archiving .pio\build\esp32s3\lib819\libWire.a
Compiling .pio\build\esp32s3\libe4a\WiFi\WiFiGeneric.cpp.o
Compiling .pio\build\esp32s3\libe4a\WiFi\WiFiMulti.cpp.o
Compiling .pio\build\esp32s3\libe4a\WiFi\WiFiSTA.cpp.o
Compiling .pio\build\esp32s3\libe4a\WiFi\WiFiScan.cpp.o
Compiling .pio\build\esp32s3\libe4a\WiFi\WiFiServer.cpp.o
Archiving .pio\build\esp32s3\libe3a\libAdafruit BusIO.a
Compiling .pio\build\esp32s3\libe4a\WiFi\WiFiUdp.cpp.o
Compiling .pio\build\esp32s3\lib57f\BLE\BLE2902.cpp.o
Compiling .pio\build\esp32s3\lib57f\BLE\BLE2904.cpp.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLE2902.cpp:12:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLE2902.cpp:12:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLE2904.cpp:12:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLE2904.cpp:12:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Archiving .pio\build\esp32s3\lib405\libAdafruit GFX Library.a
Compiling .pio\build\esp32s3\lib57f\BLE\BLEAddress.cpp.o
Compiling .pio\build\esp32s3\lib57f\BLE\BLEAdvertisedDevice.cpp.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEAddress.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
Compiling .pio\build\esp32s3\lib57f\BLE\BLEAdvertising.cpp.o
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEAddress.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEAdvertisedDevice.cpp:14:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEAdvertisedDevice.cpp:14:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEAdvertising.cpp:19:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEAdvertising.cpp:19:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\lib57f\BLE\BLEBeacon.cpp.o
Compiling .pio\build\esp32s3\lib57f\BLE\BLECharacteristic.cpp.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEBeacon.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEBeacon.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLECharacteristic.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLECharacteristic.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\lib57f\BLE\BLECharacteristicMap.cpp.o
Compiling .pio\build\esp32s3\lib57f\BLE\BLEClient.cpp.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLECharacteristicMap.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLECharacteristicMap.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEClient.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEClient.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\lib57f\BLE\BLEDescriptor.cpp.o
Compiling .pio\build\esp32s3\lib57f\BLE\BLEDescriptorMap.cpp.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEDescriptor.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEDescriptor.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEDescriptorMap.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEDescriptorMap.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Archiving .pio\build\esp32s3\libe4a\libWiFi.a
Compiling .pio\build\esp32s3\lib57f\BLE\BLEDevice.cpp.o
Compiling .pio\build\esp32s3\lib57f\BLE\BLEEddystoneTLM.cpp.o
Compiling .pio\build\esp32s3\lib57f\BLE\BLEEddystoneURL.cpp.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEDevice.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEDevice.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEEddystoneURL.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEEddystoneURL.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEEddystoneTLM.cpp:12:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEEddystoneTLM.cpp:12:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\lib57f\BLE\BLEExceptions.cpp.o
Compiling .pio\build\esp32s3\lib57f\BLE\BLEHIDDevice.cpp.o
Compiling .pio\build\esp32s3\lib57f\BLE\BLERemoteCharacteristic.cpp.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEHIDDevice.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEHIDDevice.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLERemoteCharacteristic.h:10,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLERemoteCharacteristic.cpp:8:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLERemoteCharacteristic.h:10,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLERemoteCharacteristic.cpp:8:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\lib57f\BLE\BLERemoteDescriptor.cpp.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLERemoteDescriptor.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLERemoteDescriptor.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\lib57f\BLE\BLERemoteService.cpp.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLERemoteService.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLERemoteService.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\lib57f\BLE\BLEScan.cpp.o
Compiling .pio\build\esp32s3\lib57f\BLE\BLESecurity.cpp.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLESecurity.h:10,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLESecurity.cpp:8:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLESecurity.h:10,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLESecurity.cpp:8:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEScan.cpp:10:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEScan.cpp:10:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\lib57f\BLE\BLEServer.cpp.o
Compiling .pio\build\esp32s3\lib57f\BLE\BLEService.cpp.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEServer.cpp:8:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEServer.cpp:8:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEService.cpp:10:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEService.cpp:10:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\lib57f\BLE\BLEServiceMap.cpp.o
Compiling .pio\build\esp32s3\lib57f\BLE\BLEUUID.cpp.o
Compiling .pio\build\esp32s3\lib57f\BLE\BLEUtils.cpp.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEServiceMap.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEServiceMap.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEUUID.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEUUID.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEUtils.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEUtils.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\lib57f\BLE\BLEValue.cpp.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEValue.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/BLEValue.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\lib57f\BLE\FreeRTOS.cpp.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/include/freertos/include/esp_additions/freertos/FreeRTOSConfig.h:10,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/include/freertos/include/freertos/FreeRTOS.h:57,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/FreeRTOS.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/include/freertos/include/esp_additions/freertos/FreeRTOSConfig.h:10,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/include/freertos/include/freertos/FreeRTOS.h:57,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src/FreeRTOS.cpp:7:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\lib57f\BLE\GeneralUtils.cpp.o
Compiling .pio\build\esp32s3\lib3f1\WiFiClientSecure\WiFiClientSecure.cpp.o
Compiling .pio\build\esp32s3\lib3f1\WiFiClientSecure\esp_crt_bundle.c.o
Compiling .pio\build\esp32s3\lib3f1\WiFiClientSecure\ssl_client.cpp.o
Compiling .pio\build\esp32s3\libd37\HTTPClient\HTTPClient.cpp.o
Compiling .pio\build\esp32s3\lib33c\FS\FS.cpp.o
Compiling .pio\build\esp32s3\lib33c\FS\vfs_api.cpp.o
Compiling .pio\build\esp32s3\lib72e\WebServer\Parsing.cpp.o
Compiling .pio\build\esp32s3\lib72e\WebServer\WebServer.cpp.o
Compiling .pio\build\esp32s3\lib72e\WebServer\detail\mimetable.cpp.o
Compiling .pio\build\esp32s3\FrameworkArduino\Esp.cpp.o
Compiling .pio\build\esp32s3\FrameworkArduino\FirmwareMSC.cpp.o
Compiling .pio\build\esp32s3\FrameworkArduino\FunctionalInterrupt.cpp.o
Compiling .pio\build\esp32s3\FrameworkArduino\HWCDC.cpp.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/USB.h:16,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/HWCDC.cpp:14:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/USB.h:16,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/HWCDC.cpp:14:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/USBMSC.h:18,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/FirmwareMSC.h:17,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/FirmwareMSC.cpp:14:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/USBMSC.h:18,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/FirmwareMSC.h:17,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/FirmwareMSC.cpp:14:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Archiving .pio\build\esp32s3\lib57f\libBLE.a
Compiling .pio\build\esp32s3\FrameworkArduino\HardwareSerial.cpp.o
Compiling .pio\build\esp32s3\FrameworkArduino\IPAddress.cpp.o
Compiling .pio\build\esp32s3\FrameworkArduino\IPv6Address.cpp.o
Compiling .pio\build\esp32s3\FrameworkArduino\MD5Builder.cpp.o
Archiving .pio\build\esp32s3\lib3f1\libWiFiClientSecure.a
Compiling .pio\build\esp32s3\FrameworkArduino\Print.cpp.o
Compiling .pio\build\esp32s3\FrameworkArduino\Stream.cpp.o
Archiving .pio\build\esp32s3\lib33c\libFS.a
Compiling .pio\build\esp32s3\FrameworkArduino\StreamString.cpp.o
Compiling .pio\build\esp32s3\FrameworkArduino\Tone.cpp.o
Compiling .pio\build\esp32s3\FrameworkArduino\USB.cpp.o
Archiving .pio\build\esp32s3\libd37\libHTTPClient.a
Compiling .pio\build\esp32s3\FrameworkArduino\USBCDC.cpp.o
Compiling .pio\build\esp32s3\FrameworkArduino\USBMSC.cpp.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/USB.h:16,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/USB.cpp:14:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/USB.h:16,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/USB.cpp:14:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/USB.h:16,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/USBCDC.cpp:14:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/USB.h:16,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/USBCDC.cpp:14:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Archiving .pio\build\esp32s3\lib72e\libWebServer.a
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/USBMSC.h:18,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/USBMSC.cpp:14:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/USBMSC.h:18,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/USBMSC.cpp:14:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\FrameworkArduino\WMath.cpp.o
Compiling .pio\build\esp32s3\FrameworkArduino\WString.cpp.o
Compiling .pio\build\esp32s3\FrameworkArduino\base64.cpp.o
Compiling .pio\build\esp32s3\FrameworkArduino\cbuf.cpp.o
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-adc.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-bt.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-cpu.c.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-cpu.c:15:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-cpu.c:15:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-dac.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-gpio.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-i2c-slave.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-i2c.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-ledc.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-matrix.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-misc.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-psram.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-rgb-led.c.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-misc.c:15:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-misc.c:15:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-rmt.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-sigmadelta.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-spi.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-time.c.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-spi.h:22,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-spi.c:15:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-timer.c.o
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-spi.h:22,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-spi.c:15:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-tinyusb.c.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-tinyusb.c:2:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-tinyusb.c:2:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-touch.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\esp32-hal-uart.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\firmware_msc_fat.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\libb64\cdecode.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\libb64\cencode.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\main.cpp.o
Compiling .pio\build\esp32s3\FrameworkArduino\stdlib_noniso.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\wiring_pulse.c.o
Compiling .pio\build\esp32s3\FrameworkArduino\wiring_shift.c.o
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/include/freertos/include/esp_additions/freertos/FreeRTOSConfig.h:10,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/include/freertos/include/freertos/FreeRTOS.h:57,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/main.cpp:1:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:146: warning: "CONFIG_BT_CTRL_BLE_MAX_ACT" redefined
#define CONFIG_BT_CTRL_BLE_MAX_ACT 6
<command-line>: note: this is the location of the previous definition
In file included from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/include/freertos/include/esp_additions/freertos/FreeRTOSConfig.h:10,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/include/freertos/include/freertos/FreeRTOS.h:57,
from C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/cores/esp32/main.cpp:1:
C:/Users/Administrator/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32s3/qio_qspi/include/sdkconfig.h:237: warning: "CONFIG_BT_ACL_CONNECTIONS" redefined
#define CONFIG_BT_ACL_CONNECTIONS 6
<command-line>: note: this is the location of the previous definition
Archiving .pio\build\esp32s3\libFrameworkArduino.a
Linking .pio\build\esp32s3\firmware.elf
Retrieving maximum program size .pio\build\esp32s3\firmware.elf
Checking size .pio\build\esp32s3\firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [== ] 18.3% (used 60052 bytes from 327680 bytes)
Flash: [=== ] 28.1% (used 938421 bytes from 3342336 bytes)
Building .pio\build\esp32s3\firmware.bin
esptool.py v4.5.1
Creating esp32s3 image...
Merged 2 ELF sections
Successfully created esp32s3 image.
================================================================= [SUCCESS] Took 49.81 seconds =================================================================
最新发布
扫一扫
1108
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
