EN 438-2装饰用高压层板材性能测试

EN 438-2装饰用高压层板材性能测试--测试标准

EN 438-2 High-pressure decorative laminates (HPL)-Sheets based on thermosetting resins (usually called Laminates)-Part 2: Determination of properties

EN 438-2装饰用高压层压制件(HPL).热固性树脂为基质的板材.第2部分:性能测试

EN 438-2装饰用高压层板材性能测试--测试范围

This European Standard specifies the methods of test for determination of the properties of high-pressure decorative laminates as defined in Clause 3. These methods are primarily intended for testing the sheets specified in EN 438-3, EN 438-4, EN 438-5, EN 438-6, EN 438-8, and EN 438-9.

本欧洲标准规定了第3条中规定的高压装饰层合板性能测定的试验方法。这些方法主要用于测试EN 438-3、EN 438-4、EN 438-5、EN 438-6、EN 438-8和EN 438-9规定的板材。

EN 438-2装饰用高压层板材性能测试--检测项目及方法

Clause 4 Assessment of appearance外观评价

Clause 5 Determination of thickness厚度

Clause 6 Determination of length and width 长宽

Clause 7 Determination of edge straightness边直线度

Clause 8 Determination of edge squareness边直角度

Clause 9 Determination of flatness平整度

Clause 10 Resistance to surface wear表面耐磨测试

Clause 11 Resistance to abrasion耐磨测试

Clause 12 Resistance to Immersion in Boiling Water 耐沸水浸泡

Clause 13 Substrate protection against water vapour基材耐水蒸汽保护    

Clause 14 Resistance to water vapour耐水蒸汽

Clause 15 Resistance to wet conditions耐湿测试

Clause 16 Resistance to dry heat耐干热

Clause 17 Dimensional stability at elevated temperature 高温尺寸稳定性

Clause 18 Resistance to wet heat耐湿热

Clause 19 Resistance to climatic shock耐环境温湿变化测试

Clause 20 Resistance to impact by small-diameter ball耐小球冲击

Clause 21 Resistance to impact by large-diameter ball耐大球冲击

Clause 22 Resistance to impact by large-diameter ball( flooring grade laminates)耐大球冲击

Clause 23 Resistance to cracking under stress耐应力开裂 (层压板厚度≤2mm)

Clause 24 Resistance to crazing (Compact laminates)耐龟裂

Clause 25 Resistance to scratching 耐刮痕

Clause 26 Resistance to staining 耐污性

Clause 27 Light resistance(Xenon arc) 耐光色牢度(氙弧灯)

Clause 28 Resistance to UV light (Exterior grade laminates) 耐紫外光(适于外用级层压板)

Clause 29 Resistance to artificial weathering(including light fastness) 耐人工气候老化(包括光照色牢度)

Clause 30 Determination of the microscratch resistance耐微痕性

Clause 31 Formability(Method A)可成型性(方法A)

Clause 32 Formability(Method B)可成型性(方法B)

Clause 33 Resistance to blistering(Method A) 耐起泡(方法A)

Clause 34 Resistance to blistering(Method B) 耐起泡(方法B)

出自GF2022