CANoe模块节点如何选择应用层通道

CANoe 专栏收录该内容
¥59.90 ¥99.00
59篇文章

CANoe是一种用于开发、测试和仿真汽车通信网络的工具,它提供了各种模块节点来模拟和分析不同的通信协议和网络节点。在CANoe中,选择应用层通道的过程涉及到配置节点和定义消息传输的参数。下面将详细介绍CANoe模块节点如何选择应用层通道的步骤,并提供示例源代码。

  1. 创建节点配置:
    在CANoe中,首先需要创建一个节点配置文件,该文件定义了要模拟的网络节点的属性和参数。节点配置文件使用XML格式,并且可以使用CANoe提供的编辑器进行创建和修改。以下是一个示例节点配置文件的代码:
<?xml version="1.0" encoding="UTF-8"?>
<NetworkNodeConfiguration>
  <Node name=
CANoe学习笔记(1) 新建工程及通道配置步骤图解 参考官方教程,整理的个人自学笔记,方便日后查阅。 CANoe是德国Vector公司出的一款总线开发环境,全称叫CAN open environment,主要用于汽车总线的开发而设计的。CANoe的前期是为了对CAN通信网络进行建模、仿真、测试和开发,是网络和ECU开发、测试和分析的专业工具。 参考链接: CANoe/CANalyzer 基础教程合集 教程演示版本 CANoe 12.0.75 目录 1.新建工程 2.通道数目及波特率配置 3.CANoe软件通道与硬件通道的映射配置 4.添加总 阅读详情

相关推荐

CANoe基础教程01:新建工程及通道配置

创建一个新的CANoe工程(以CAN总线为例),CANoe通道配置,CANoe软件通道与硬件通道的映射配置,添加总线通信数据库,保存CANoe工程

weixin_43360025的博客 8799

CANoe配置同一设备两个通道间的互发

本篇硬件以VN7640、软件以CANoe 15为例,利用两个CAN/CANFD通道进行报文的互发,完成自发自收。

mqy0513的博客 4595

使用CANoe进行LIN Slave Conformance Test

使用CANoe进行LIN Conformance TestStep 1. 加入测试模块Step 2. 配置测试模块Step 3.Step 4. Step 1. 加入测试模块 在菜单栏中选择Test -> Test Modules -> Test Setup,如下图。 在跳出如下界面后,右击选择New Test Environment,创建测试环境。 右击Test Environment,选择Insert LIN Slave Conformance Tester,添加测试模块。 Step 2

Rome was not built in a day. 1万+

如何利用CANoe在两路CAN通道之间创建网关(gateway)

CANoe网关,利用CAPL实现CAN转发

Richy_Lai的博客 7902

Canoe工具使用-通道重映射

本文基于Canoe1603A工具,介绍一种Canoe的配置功能。通常作为汽车软件开发人员,需要分析整车实时采集的Can数据,而整车数采仪采集的数据通常是整车的所有节点数据,但是我们想要的节点数据通常只有1个,这种情况在我们使用Canoe Offline数据回放功能时,就需要对数据进行Mapping,把想要播放的节点数据重新Mapping到Canoe能够支持的特定通道上去。......

dby3579的专栏 4691

CANoe新建工程及通道配置

点击new,CANoe提供了根据总线类型划分的不同模板。包括不同的总线类型、通信速率、通道数目等内容。以CAN 500kbaud 2ch为例。这是一个CAN总线、500k波特率、2通道的一个工程模板。其中,总线数目等可以在项目中配置。点击Hardware-ChanelUsage即可进行通道相关配置。点击Networkhardware即可进行通信网络速率相关配置。通信速率要和连接的ECU保持一致。

Awesome0221的博客 1244

使用CANoe搭建CAN网关

Vector公司的CANoe是一款强大的总线仿真工具,通过CANoe搭建出来的总线模型可以模拟真实的汽车总线,并且通过CAPL语言可以对节点上的ECU进行编程。这样不仅能够模拟总线上的报文发送,还可以模拟ECU的内部逻辑,理论上可以完全模拟出CAN总线系统。这里介绍一下如何通过CANoe搭建一个CAN网关。

easychang的博客 2万+

CANoe VN1640A两通道配置实战:手把手教你搭建CAPL自动化测试环境

本文详细介绍了使用CANoe VN1640A硬件搭建双通道CAPL自动化测试环境的完整流程。从硬件物理连接、软件通道映射,到环境变量配置、网络节点设置,最后通过CAPL测试模块实现自动化验证逻辑,手把手指导工程师完成从零到一的测试环境搭建,确保自动化测试稳定运行。

ii567的博客 1199

CANoe的各模块节点是如何选择应用层通道的

当CANoe为Channel-based access模式时,需要配置软硬件通道的映射;当CANoe为Network-based access模式时,需要配置软硬件网络的映射通道映射:网络映射:当然,只有CANoe软件工作模式为Real bus时,才需要软硬件通道或网络映射。如果工作模式为Simulated bus时,不需要软硬件映射其实软硬件通道映射和软硬件网络映射的主要区别在硬件侧。

jasonj333 1345

CANoe通道配置指南

在使用CANoe进行开发和测试时,正确配置CANoe通道是至关重要的。在配置CANoe通道之前,首先需要确定使用的通道类型。通过按照以上步骤配置CANoe通道,您可以确保CANoe与系统中的ECU正确通信,并进行开发和测试工作。b. 在通道属性窗口中,配置通道的参数,如波特率、采样点设置等。d. 配置通道的硬件接口参数,如连接到的CAN适配器类型、设备ID等。a. 在CANoe配置文件中,展开网络节点并选择所需的通道。a. 在CANoe配置文件中,展开网络节点并选择所需的通道。

AzqLinux的博客 1358

电力现货交易市场-报价方式

电是一种能源,也是一种商品,既然是商品自然可以在市场中进行自由交易。

qq_38225433的博客 5121

概述DeepLab系列(deeplab v1, deeplab v2, deeplab v3, deeplab v3+)

前言:图像分割是指像素级别的图像识别,即标注出图像中每个像素所属的对象类别。 语义分割更注重类别之间的区分,而实例分割更注重个体之间的区别。 DeepLab是由Google团队提出的一系列图像分割算法。 DeepLab v1 (2014年) Paper (ICLR 2015) Code 创新点: 空洞卷积(Atrous Conv); <解决编码过程中信号不断被下采样,细节丢失的问题> 全连接条件随机场(Fully-connected Conditional Random Field)。

ZSH12345678900的博客 5530

顶刊《会计研究》数据复现|最新上市公司数智化数据

本文基于Python文本分析方法构建了中国A股上市公司数智化指标(1991-2024),通过识别年报中的"机器学习""智能医疗"等关键词,量化企业数字化与智能化融合程度。研究发现数智化企业更倾向于非正式渠道的定性披露以规避风险,该指标为监管完善信披规则提供了参考。研究还揭示了数智化对企业信息披露策略的转变,并提出了未来研究方向,包括数智化对绿色创新、ESG表现等影响机制。数据覆盖非金融类上市公司,采用文本挖掘技术构建结构化指标,为相关领域研究提供了微观基础。

PPdata_Academy的博客 1491

Fiddler Everywhere保姆级教程:10分钟搞定手机HTTPS抓包(附证书配置避坑指南)

本文提供Fiddler Everywhere移动端HTTPS抓包的保姆级教程,涵盖环境配置、代理设置、证书安装及常见问题排查。重点解析如何正确安装并信任Fiddler根证书以解密HTTPS流量,帮助开发者快速搭建抓包环境,高效分析应用网络行为,提升调试效率。

git9versioner的博客 706

Python进阶005:修改Jupyter Notebook的工作路径

1、Jupyter Notebook简介 2、修改Jupyter Notebook的工作路径 如下三个步骤: 一、安装notebook 在CMD命令行中输入: pip install notebook 二、启动notebook jupyter notebook 启动后发现是在你的用户目录下,如下图所示,但是该目录下有很多的其他文件或文件夹,因此我想把这个环境切换到我单门创建的一个文件夹中。 三、创建notebook的配置文件 在CMD命令行中执行: jupyter notebook --genera

若北辰 1389

AE-扭曲-变形-弧

一些AE效果的着色器实现记录

What_can_you_do的博客 1177

高通开发系列 - System之FOTA/DFOTA包制作和升级

高通开发系列 - System之FOTA/DFOTA包制作和升级

fulinux的博客 4227

老版QQ原生表情gif动态

这是老版的QQ表情,不过全是动态的的,Windows照片查看器是不会动的,可以右击用浏览器打开查看,再说一遍是老版的,只是分享给宁愿用老版也要动态的人。

jdk-8u144-linux-x64.tar.gz.

该资源为搭建Linux系统Java环境用,资源的后缀为tar.gz格式的压缩包

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

ET2012新版免狗免安装绿色软件

ET2012新版免狗免安祖昂绿色软件。,新界面,新视觉,

上一篇: 使用CAPL自动化封装的通用安全解锁函数在CANoe中诊断
下一篇: 学习CANoe: 创建环境变量的DBC文件详细指南
普通网友
博客等级 码龄3年 84粉丝 0原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符  | 博主筛选后可见
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值