POJ 1251 Jungle Roads (prim)

本文介绍了一道关于最小生成树的编程题目,使用Prim算法解决如何在村庄间维护成本最低的路网问题。输入包括村庄数量及各村庄间的连接与维护费用,输出为连接所有村庄所需的最低费用。

Jungle Roads
Time Limit: 1000MS Memory Limit: 10000K
Total Submissions: 28106 Accepted: 13266

Description


The Head Elder of the tropical island of Lagrishan has a problem. A burst of foreign aid money was spent on extra roads between villages some years ago. But the jungle overtakes roads relentlessly, so the large road network is too expensive to maintain. The Council of Elders must choose to stop maintaining some roads. The map above on the left shows all the roads in use now and the cost in aacms per month to maintain them. Of course there needs to be some way to get between all the villages on maintained roads, even if the route is not as short as before. The Chief Elder would like to tell the Council of Elders what would be the smallest amount they could spend in aacms per month to maintain roads that would connect all the villages. The villages are labeled A through I in the maps above. The map on the right shows the roads that could be maintained most cheaply, for 216 aacms per month. Your task is to write a program that will solve such problems. 

Input

The input consists of one to 100 data sets, followed by a final line containing only 0. Each data set starts with a line containing only a number n, which is the number of villages, 1 < n < 27, and the villages are labeled with the first n letters of the alphabet, capitalized. Each data set is completed with n-1 lines that start with village labels in alphabetical order. There is no line for the last village. Each line for a village starts with the village label followed by a number, k, of roads from this village to villages with labels later in the alphabet. If k is greater than 0, the line continues with data for each of the k roads. The data for each road is the village label for the other end of the road followed by the monthly maintenance cost in aacms for the road. Maintenance costs will be positive integers less than 100. All data fields in the row are separated by single blanks. The road network will always allow travel between all the villages. The network will never have more than 75 roads. No village will have more than 15 roads going to other villages (before or after in the alphabet). In the sample input below, the first data set goes with the map above. 

Output

The output is one integer per line for each data set: the minimum cost in aacms per month to maintain a road system that connect all the villages. Caution: A brute force solution that examines every possible set of roads will not finish within the one minute time limit. 

Sample Input

9
A 2 B 12 I 25
B 3 C 10 H 40 I 8
C 2 D 18 G 55
D 1 E 44
E 2 F 60 G 38
F 0
G 1 H 35
H 1 I 35
3
A 2 B 10 C 40
B 1 C 20
0

Sample Output

216

30


最小生成树模板题


prim


#include <cstdio>
#include <cstring>
#include <iostream>
#include <algorithm>
#include <set>
#include <cmath>
#include <stack>
#include <queue>
#include <vector>
#include <map>
using namespace std;

#define ll long long
#define mem(a, b) memset(a, b, sizeof(a))
const int maxn = 30;
const int inf = 0x3f3f3f3f;
int road[maxn][maxn], dis[maxn];
bool vis[maxn];
int n;

void prim() {
        int m, v;
        for (int i = 0; i < n; i ++) {
                dis[i] = road[0][i];
                vis[i] = false;
        }
        for (int i = 0; i < n; i ++) {
                m = inf;
                for (int j = 0; j < n; j ++) {
                        if (!vis[j] && m > dis[j]) {
                                v = j;
                                m = dis[j];
                        }
                }
                vis[v] = true;
                for (int j = 0; j < n; j ++) {
                        if (!vis[j] && dis[j] > road[v][j]) {
                                dis[j] = road[v][j];
                        }
                }
        }
        for (int i = 0; i < n; i ++) {
                dis[0] += dis[i];
        }
        cout << dis[0] << endl;
}
int main()
{
    int m, w;
    char s[5], en[5];
    while(cin >> n, n)
    {
        memset(road, 63, sizeof(road));
        for(int i = 0; i < n; i++)
            road[i][i] = 0;
        for(int i = 1; i < n; i++)
        {
            scanf("%s%d", s, &m);
            for(int j = 0; j < m; j++)
            {
                scanf("%s%d", en, &w);
                road[s[0]-'A'][en[0]-'A'] = road[en[0]-'A'][s[0]-'A'] = w;
            }
        }
        prim();
    }
    return 0;
}


最小生成树入门:http://www.cnblogs.com/biyeymyhjob/archive/2012/07/30/2615542.html


下载前必看:https://renmaiwang.cn/s/bvbfw Verilog设计_串并转换 / 移位寄存器实现了一种串并转换的功能,其核心原理在于移位寄存器的运用。 这里详细展示了串转并以及并转串两种不同的设计方案。 每一种转换模式都设有专属的使能信号,同时并行输出数据的格式提供了两种选择:最低有效位优先(lsb)和最高有效位优先(msb)。 串并转换技术主要应用于串行传输与并行传输这两种数据传输模式之间的相互转换,而移位寄存器是达成这一目标的常用工具,能够支持并行及串行的数据输入与输出操作。 这些移位寄存器通常被设定为“串行输入、并行输出”(SIPO)或“并行输入、串行输出”(PISO)两种工作模式。 在串行数据输出的过程中,构成数据和字符的码元会按照既定的时间顺序逐位进行传输。 相比之下,并行数据传输则是在同一时刻将固定数量(普遍为8位或16位等)的数据和字符码元同时发送至接收端。 数据输入通常采用串行格式进行。 一旦数据成功输入寄存器,它便可以在所有输出端同时被读取,或者选择逐位移出。 寄存器中的每个触发器均设计为边沿触发类型,并且所有触发器均以特定的时钟频率协同工作。 对于每一个输入位而言,它需要经过N个时钟周期才能最终在N个输出端呈现,从而完成并行输出。 值得注意的是,在串行加载数据期间,并行输出端的数据状态应保持稳定。 数据输入则采用并行格式。 在将数据写入寄存器的操作过程中,写/移位控制线必须暂时处于非工作状态;而一旦需要执行移位操作,控制线便会变为激活状态,并且寄存器会被锁定以保持当前状态。 只要时钟周期数不超过输入数据串的长度,数据输出端Q将按照预定的顺序逐位读出并行数据,并且必须明确区分最低有效位(LSB)和最高有效位(MSB)。
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
红包 添加红包
表情包 插入表情
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值