My Ubuntu free CD Shipped/Cancelled requests list:

最新推荐文章于 2025-12-07 15:22:15 发布
原创 最新推荐文章于 2025-12-07 15:22:15 发布 · 491 阅读 · 0 ·
CC 4.0 BY-SA版权
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
文章标签：

#ubuntu #list

此记录详细列出了从2006年至2008年期间请求并发货的Ubuntu CD的数量及日期，包括每次请求的批准状态，显示了多次成功的发货记录及未批准或取消的请求。

Request accepted. Please note that requests usually take from 4 to 6 weeks to deliver, depending on the country of shipping.

Current Request Details

  • 1 Ubuntu CD for PC

Shipped/Cancelled requests

  • 10 CDs requested on 2006-05-24. 10 CDs were approved and sent to the shipping company on 2006-05-24. Please note requests usually take from 4 to 6 weeks to deliver, depending on the country of shipping.
  • 10 CDs requested on 2006-05-25. This request was cancelled, so no CDs were shipped.
  • 25 CDs requested on 2006-06-01. 25 CDs were approved and sent to the shipping company on 2006-06-06. Please note requests usually take from 4 to 6 weeks to deliver, depending on the country of shipping.
  • 9 CDs requested on 2007-04-16. 9 CDs were approved and sent to the shipping company on 2007-04-16. Please note requests usually take from 4 to 6 weeks to deliver, depending on the country of shipping.
  • 9 CDs requested on 2007-06-23. This request was not approved, so no CDs were shipped.
  • 6 CDs requested on 2007-10-11. 6 CDs were approved and sent to the shipping company on 2007-10-15. Please note requests usually take from 4 to 6 weeks to deliver, depending on the country of shipping.
  • 6 CDs requested on 2007-11-12. This request was not approved, so no CDs were shipped.
  • 1 CDs requested on 2008-04-21. 1 CDs were approved and sent to the shipping company on 2008-04-22. Please note requests usually take from 4 to 6 weeks to deliver, depending on the country of shipping.
  • 1 CDs requested on 2008-04-30. 1 CDs were approved and sent to the shipping company on 2008-05-04. Please note requests usually take from 4 to 6 weeks to deliver, depending on the country of shipping.
zubin006
关注
【嵌入式Linux】编译报错 /bin/sh: 1: lzop: not found 解决方法
坚韧与专注
12-26 1587
【嵌入式Linux】编译报错 /bin/sh: 1: lzop: not found 解决方法
编译Linux内核出现：usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x50): multiple definition of `yylloc‘；
zhoukaiqili的博客
08-06 1万+
usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x50): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
linux内核kconfig objs,【已解决】Cygwin下交叉编译Linux内核在make menuconfig时出错：scripts/kconfig/mconf: scripts/kconfi...
weixin_32786041的博客
04-30 1866
【问题】折腾：期间，Cygwin下交叉编译linux时，去make menuconfig，虽然已经解决了：但是接着出错：CLi@PC-CLI-1 ~/develop/kernel/linux-2.6.19.1$ make menuconfigHOSTCC scripts/basic/fixdepscripts/basic/fixdep.c: In function ‘parse_config_f...
Android系统-Ubuntu21.04编译RK3399_android10问题汇总
王涛的博客
02-14 2236
一.uboot:parser.tab:multiple definition of `yylloc’; /usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here collect2: error: ld returned 1 exit status make[2]: *** [
64位ubuntu 12.04编译linux内核提示openssl/opensslv.h文件缺失
不积跬步，无以至千里！
01-24 9412
今天心血来潮，想编译一下linux内核来玩玩。从git上下载了最新版本的源码，放在我的ubuntu系统下，首先从现有ubuntu系统的boot目录下，拷贝了config-3.13.0-32-generic文件到linux源码根目录下，改名为.config文件。然后make clean，make menuconfig，save，然后运行make bzImage。结果提示如下：leon@Ubuntu:~
彻底掌握kreait/firebase-php：Cloud Firestore企业级集成指南
gitblog_00192的博客
11-25 5807
你是否正在为PHP项目寻找可靠的Firestore集成方案？是否因官方SDK缺失而被迫编写繁琐的HTTP请求？kreait/firebase-php作为PHP生态中最成熟的Firebase Admin SDK，已为超过10万开发者解决了这一难题。本文将带你深入理解其Cloud Firestore集成的底层原理与高级用法，从初始化配置到分布式事务，从性能优化到错误处理，一站式掌握企业级Firesto
Ubuntu 20.4 没有/etc/network/interfaces，配置网络需用Netplan
热门推荐
小子宝丁的博客
04-21 3万+
新本的Ubuntu 20.4 没有/etc/network/interfaces，配置网络需用Netplan，本文介绍了Netplan及其使用方式。
第1章 Linux内核编译出现错误：scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
qq_43778130的博客
03-06 5444
Linux内核编译出错:/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x50): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here collect2: error: ld returned 1 exit status make[2]: *** [scripts/Makefile.host:100：scripts/dtc/dt
64位ubuntu 12.04编译linux内核提示"mkimage" command not found
不积跬步，无以至千里！
01-24 6293
今天心血来潮，想编译以下linux内核来玩玩。一开始编译x86的版本，遇到了openssl/opensslv.h文件缺失的问题，经过一番折腾，顺利解决（解决过程请参见我的另外一篇博客“ linux（ubuntu）编译linux内核提示openssl/opensslv.h文件缺失”）。然后就进而想编译一个arm的版本出来，放到我的mini2440开发板上跑一跑。于是按照博客（移植Linux3.4.2
k1@k1:~/linux/IMAX6ULL/NXP_uboot/uboot-imx-rel_imx_4.1.15_2.1.0_ga$ ./mx6ull_alientek_emmc.sh CLEAN examples/standalone CLEAN tools CLEAN tools/lib tools/common CLEAN include/bmp_logo.h include/bmp_logo_data.h u-boot-nodtb.bin u-boot.lds u-boot.srec u-boot.map u-boot.cfg u-boot.bin u-boot.sym u-boot.imx u-boot System.map CLEAN scripts/basic CLEAN scripts/kconfig CLEAN include/config include/generated CLEAN .config include/autoconf.mk include/autoconf.mk.dep include/config.h HOSTCC scripts/basic/fixdep HOSTCC scripts/kconfig/conf.o SHIPPED scripts/kconfig/zconf.tab.c SHIPPED scripts/kconfig/zconf.lex.c SHIPPED scripts/kconfig/zconf.hash.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf board/freescale/mx6ull_alientek_emmc/Kconfig:2: syntax error arch/arm/cpu/armv7/mx6/Kconfig:3: missing end statement for this entry arch/arm/Kconfig:1: missing end statement for this entry board/freescale/mx6ull_alientek_emmc/Kconfig:1: invalid statement board/freescale/mx6ull_alientek_emmc/Kconfig:15: unexpected end statement arch/arm/cpu/armv7/mx6/Kconfig:287: unexpected end statement arch/arm/Kconfig:862: unexpected end statement scripts/kconfig/Makefile:114: recipe for target 'mx6ull_alientek_emmc_defconfig' failed make[1]: *** [mx6ull_alientek_emmc_defconfig] Error 1 Makefile:480: recipe for target 'mx6ull_alientek_emmc_defconfig' failed make: *** [mx6ull_alientek_emmc_defconfig] Error 2 make -f ./Makefile silentoldconfig make -f ./scripts/Makefile.build obj=scripts/basic rm -f .tmp_quiet_recordmcount make -f ./scripts/Makefile.build obj=scripts/kconfig silentoldconfig mkdir -p include/config include/generated scripts/kconfig/conf --silentoldconfig Kconfig board/freescale/mx6ull_alientek_emmc/Kconfig:2: syntax error arch/arm/cpu/armv7/mx6/Kconfig:3: missing end statement for this entry arch/arm/Kconfig:1: missing end statement for this entry board/freescale/mx6ull_alientek_emmc/Kconfig:1: invalid statement board/freescale/mx6ull_alientek_emmc/Kconfig:15: unexpected end statement arch/arm/cpu/armv7/mx6/Kconfig:287: unexpected end statement arch/arm/Kconfig:862: unexpected end statement scripts/kconfig/Makefile:46: recipe for target 'silentoldconfig' failed make[2]: *** [silentoldconfig] Error 1 Makefile:480: recipe for target 'silentoldconfig' failed make[1]: *** [silentoldconfig] Error 2 make: *** No rule to make target 'include/config/auto.conf', needed by 'include/config/uboot.release'。 停止。 k1@k1:~/linux/IMAX6ULL/NXP_uboot/uboot-imx-rel_imx_4.1.15_2.1.0_ga$ grep -nR "mx6ull_alientek_emmc.h" board/freescale/mx6ull_alientek_emmc/MAINTAINERS:5:F: include/configs/mx6ull_alientek_emmc.h k1@k1:~/linux/IMAX6ULL/NXP_uboot/uboot-imx-rel_imx_4.1.15_2.1.0_ga$ sudo fdisk -l /dev/sdb [sudo] k1 的密码： fdisk: 打不开 /dev/sdb: 没有那个文件或目录 k1@k1:~/linux/IMAX6ULL/NXP_uboot/uboot-imx-rel_imx_4.1.15_2.1.0_ga$
08-16
根据提供的错误信息，问题出现在编译 U-Boot 时，Kconfig 文件存在语法错误。错误信息指出在多个 Kconfig 文件中存在语法错误，如缺少结束语句、无效语句等。具体错误位置包括： 1. `board/freescale/mx6ull_...
# This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options override the # default value. Include /etc/ssh/sshd_config.d/*.conf # When systemd socket activation is used (the default), the socket # configuration must be re-generated after changing Port, AddressFamily, or # ListenAddress. # # For changes to take effect, run: # # systemctl daemon-reload # systemctl restart ssh.socket # "/etc/ssh/sshd_config" 131 lines, 3517 bytes 怎么添加
06-25
[^1]:CentOS7系统下/etc/ssh/sshd_config文件解释[^2]:ubuntu修改/etc/ssh/sshd_config配置文件后重启ssh服务报错的解决办法[^3]:Linux下的/etc/ssh/ssh_config文件配置详解[^4]:SSH配置文件/etc/ssh/sshd_conf参数...
ubuntu的ROS安装
2401_84444731的博客
12-05 195
本文介绍了在Ubuntu系统上安装ROS2的简单方法：通过命令行执行wget http://fishros.com/install-Ofishros&&.fishros命令，并按照B站视频教程操作。安装完成后需注意区分ROS1和ROS2的指令差异，建议运行ros2 run turtlesim turtlesim_node命令来测试安装是否成功，该命令会启动一个乌龟仿真界面作为验证标志。全文提供了完整的安装指引和验证方法。
50、【Ubuntu】【Gitlab】拉出内网 Web 服务：http.server 单/多线程分析（二）
HIT_Weston的博客
12-04 1330
本文分析了Python的http.server模块在单线程和多线程模式下的性能表现。通过测试发现，单线程模式下（Python<3.7）并发请求会被阻塞，后发请求需要等待前一个请求完成；而多线程模式下（Python≥3.7）可以同时处理多个请求。作者通过slow_server.py脚本模拟耗时操作，使用time curl命令测试响应时间，验证了线程模型的差异。文章还指出Python 3.7是一个重要分水岭，官方将默认命令行服务器升级为多线程以提升用户体验。技术细节参考了CPython源码，并提供了Git
Ubuntu搭建物联网平台(ThingsBoard)教程
501846585_QQAndroid_java
12-06 55
本教程详细介绍在Ubuntu 22.04系统上搭建ThingsBoard 4.2物联网平台的完整流程。主要内容包括：1）系统环境准备（JDK17、PostgreSQL 16）；2）ThingsBoard安装配置；3）Kafka 4.0消息队列部署；4）数据库初始化与平台启动。教程提供详细命令行操作，涵盖从软件安装到服务配置的全过程，并包含默认登录账号信息（sysadmin@thingsboard.org/sysadmin）。通过step-by-step指导帮助用户快速搭建可运行的物联网平台，避免常见配置问题
ubuntu设置分辨率
kk821521286的博客
12-04 313
通过 vnc远程ubuntu系统, ubuntu系统分辨率改变了,如何设置指定的分辨率.
ubuntu22.04+miniconda+ros2的坑（1）
thinkpad1234567890的博客
12-04 295
本文总结了在Ubuntu22.04+Miniconda环境下使用ROS2的常见问题。主要发现Conda环境会劫持系统路径，导致与ROS2系统库冲突。作者配置了两套ROS2环境（系统版和Conda版），并成功在PyCharm中使用Conda版ROS2。记录了两个关键问题：1）Conda版ROS2无法执行ros2 pkg create等操作；2）PyCharm中import同一文件夹模块时需添加包名前缀，否则会导致colcon build通过但ros2 run报错。这些经验为在混合环境下使用ROS2提供了重要参
Ubuntu部署gitlab频繁出现500的问题
starvapour的博客
12-06 162
Ubuntu部署gitlab频繁出现500的问题
虚拟机Linux（Ubuntu）忘记登录密码
最新发布
天颖
12-07 225
解决虚拟机忘记密码后，重置密码的操作
ubuntu 24下面安装docker
chencichang的博客
12-05 257
sudo apt install python3-pip sudo apt install curl apt-transport-https ca-certificates software-properties-common curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpgsudo chmod a+r /etc/apt/keyrings
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
红包 添加红包
表情包 插入表情
表情包 代码片
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值