阿里云内网和公共NTP服务器(网络时间协议-时间同步服务)

NTP是网络时间协议,用于同步网络中计算机的时间。阿里云提供内网和公共NTP服务器,其中内网服务器包括多个IP地址,而公共服务器如time1-7.aliyun.com和time.pool.aliyun.com可供互联网设备使用。此外,文章还列举了国内其他公共NTP服务器地址,并介绍了如何配置NTP服务进行时间同步。
关键字:阿里云内网和公共NTP服务器(网络时间协议-时间同步服务)
一、简介:
NTP是网络时间协议(Network Time Protocol),它是用来同步网络中各个计算机的时间的协议。
在计算机的世界里,时间非常地重要,例如对于火箭发射这种科研活动,对时间的统一性和准确性要求就非常地高,是按照A这台计算机的时间,还是按照B这台计算机的时间?NTP就是用来解决这个问题的,NTP(Network Time Protocol,网络时间协议)是用来使网络中的各个计算机时间同步的一种协议。它的用途是把计算机的时钟同步到世界协调时UTC,其精度在局域网内可达0.1ms,在互联网上绝大多数的地方其精度可以达到1-50ms。
它可以使计算机对其服务器或时钟源(如石英钟,GPS等等)进行时间同步,它可以提供高精准度的时间校正,而且可以使用加密确认的方式来防止病毒的协议攻击。


二、阿里云内网和公共NTP服务器

更新时间:2016-07-12 15:23:55 分享:
内网NTP服务器

阿里云为云服务器ECS提供了内部的NTP时间服务器,如下:

10.143.33.50
10.143.33.51
10.143.33.49
10.143.0.44
10.143.0.45
10.143.0.46

公共NTP服务器

虽然非阿里云的设备不能用阿里云的内网NTP服务器,但是阿里云提供了公共NTP服务器,供互联网上的设备使用。其主要特性是GPS、北斗授时、原子钟守时的一级时间源多机房、多链路冗余。

服务域名是:

Unix类系统:time1-7.aliyun.com
Windows: time.pool.aliyun.com

另外,阿里云还提供了其他的互联网基础服务,例如:

公共DNS:223.5.5.5/223.6.6.6,域名是 http://www.alidns.com
公共镜像站:http://mirrors.aliyun.com/ 镜像同步频率是每天凌晨2:00-4:00,覆盖了大多
<think>我们正在配置Ubuntu系统的NTP时间同步服务。根据引用内容,我们可以使用systemd-timesyncd服务(Ubuntu 16.04及以后版本默认使用)来配置NTP同步。 步骤: 1. 修改/etc/systemd/timesyncd.conf文件,配置NTP服务器。 2. 启用并重启服务。 3. 验证状态。 注意:如果系统没有安装ntp,也可以使用timedatectl来管理时间同步。但如果是作为NTP服务器(即提供时间服务给其他机器),则需要安装ntpd(如ntp或chrony)。不过用户问题中只要求配置同步(客户端),所以使用systemd-timesyncd即可。 根据引用[1],我们可以配置中国区的NTP服务器,如阿里云、清华大学等。 具体步骤: 1. 编辑配置文件:sudo vim /etc/systemd/timesyncd.conf 在[Time]部分添加或修改: NTP=ntp.aliyun.com ntp.tuna.tsinghua.edu.cn cn.ntp.org.cn FallbackNTP=ntp.ubuntu.com RootDistanceMaxSec=5 PollIntervalMinSec=32 PollIntervalMaxSec=2048 2. 启用网络时间同步并重启服务: sudo timedatectl set-ntp true sudo systemctl restart systemd-timesyncd 3. 检查状态: timedatectl status # 查看时间同步状态(会显示NTP service: active) timedatectl show-timesync --all # 显示详细的同步信息(引用[1]中提到的) systemctl status systemd-timesyncd # 查看服务状态 另外,引用[2]提到,如果使用ntpdate命令,在服务刚启动时可能会报错(需要等待几分钟)。但我们这里使用的是systemd-timesyncd,通常不需要手动运行ntpdate。 如果用户需要搭建NTP服务器(而不仅仅是客户端同步),则需要安装其他软件(如ntp或chrony),并配置允许其他客户端访问。但根据问题,用户只要求配置同步(客户端),所以上述步骤足够。 但是,问题中用户说“配置使用NTP同步服务器时间”,并没有明确是作为服务器还是客户端。由于问题描述是“同步服务器时间”,通常是指客户端行为。如果用户需要搭建NTP服务器,则需要额外步骤。 为了全面性,我们同时提供作为NTP服务器的配置方法(使用ntp包): 1. 安装ntp:sudo apt install ntp 2. 编辑配置文件:/etc/ntp.conf 添加或修改server行,使用中国的NTP服务器,例如: server ntp.aliyun.com iburst server ntp.tuna.tsinghua.edu.cn iburst server cn.ntp.org.cn iburst 如果这台机器是内网NTP服务器,还需要设置允许同步的网段(例如:restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap) 3. 重启ntp服务:sudo systemctl restart ntp 4. 在客户端机器上,配置NTP服务器指向这台服务器的IP。 但是,根据引用[3],如果是在本地搭建NTP服务器(不联网),可以配置本地时钟(但通常不推荐,因为本地时钟会漂移)。例如,在/etc/ntp.conf中添加: server 127.127.1.0 # 本地时钟 fudge 127.127.1.0 stratum 10 # 设置层级 由于用户问题没有明确是作为客户端还是服务器,我们主要按照客户端配置(使用systemd-timesyncd)来回答,同时简要提及如何搭建服务器。 根据引用[1][3],我们给出两种方案。 因此,回答结构: 一、作为客户端配置NTP同步(使用systemd-timesyncd) 二、作为NTP服务器配置(使用ntp包) 用户可以根据需要选择。</think>### Ubuntu 配置 NTP 时间同步服务指南 #### 一、配置客户端时间同步(推荐方案) **1. 修改配置文件** ```bash sudo nano /etc/systemd/timesyncd.conf ``` 在 `[Time]` 部分添加中国区 NTP 服务器: ```ini [Time] NTP=ntp.aliyun.com ntp.tuna.tsinghua.edu.cn cn.ntp.org.cn FallbackNTP=ntp.ubuntu.com RootDistanceMaxSec=5 PollIntervalMinSec=32 PollIntervalMaxSec=2048 ``` **2. 启用并重启服务** ```bash sudo timedatectl set-ntp true # 启用网络时间同步 sudo systemctl restart systemd-timesyncd # 重启服务 ``` **3. 验证同步状态** ```bash timedatectl status # 查看同步状态 timedatectl show-timesync --all # 显示详细同步信息[^1] ``` 输出应包含 `NTP service: active` `ServerAddress` 信息。 #### 二、搭建本地 NTP 服务器(可选) **1. 安装 NTP 服务** ```bash sudo apt install ntp ``` **2. 配置服务端** ```bash sudo nano /etc/ntp.conf ``` 注释默认服务器池,添加本地时钟源: ```conf # pool 0.ubuntu.pool.ntp.org iburst server 127.127.1.0 # 本地时钟源 fudge 127.127.1.0 stratum 10 # 设置时钟层级[^3] ``` **3. 重启服务并验证** ```bash sudo systemctl restart ntp ntpq -p # 查看同步状态 ``` #### 三、常见问题解决 - **同步失败问题**:服务启动后需等待 5-10 分钟完成首次同步,期间可能出现 `no server suitable for synchronization found` 错误[^2]。 - **防火墙配置**:确保 UDP 123 端口开放: ```bash sudo ufw allow 123/udp ``` - **强制立即同步**: ```bash sudo systemctl stop systemd-timesyncd sudo ntpd -gq # 强制同步 sudo systemctl start systemd-timesyncd ``` #### 四、验证时间准确性 ```bash timedatectl # 检查系统时钟状态 ntpstat # 查看 NTP 同步状态 date -R # 显示当前时间及时区 ``` > **关键配置说明**: > - `stratum` 值表示时钟层级(0-15),值越小精度越高 > - `iburst` 参数可加速初始同步过程 > - 中国区推荐服务器阿里云(`ntp.aliyun.com`)、清华(`ntp.tuna.tsinghua.edu.cn`)
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值