Linux下usb设备重定向

最新推荐文章于 2022-12-09 14:55:31 发布

z_muyangren

最新推荐文章于 2022-12-09 14:55:31 发布

阅读量1.7k

点赞数

CC 4.0 BY-SA版权

分类专栏： linux操作系统

本文链接：https://blog.youkuaiyun.com/z_muyangren/article/details/80295966

linux操作系统专栏收录该内容

8 篇文章

订阅专栏

本文介绍当两个串口设备的idProduct和idVendor信息相同且无serial时,如何通过udev规则进行区分的方法。利用KERNELS属性编写rule.d规则,实现特定串口设备的精确匹配。

当遇到两个串口设备idProduct、idVendor等信息都一样，并且没有serial的情况时，
可以使用和idProduct同一级下的KERNELS来编写rule.d规则

:~$ udevadm info --attribute-walk --path=/sys/bus/usb-serial/devices/ttyUSB0

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/ttyUSB0':
    KERNEL=="ttyUSB0"
    SUBSYSTEM=="usb-serial"
    DRIVER=="pl2303"
    ATTR{port_number}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0':
    KERNELS=="1-1:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="pl2303"
    ATTRS{authorized}=="1"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{bInterfaceProtocol}=="00"
    ATTRS{bInterfaceSubClass}=="00"
    ATTRS{bNumEndpoints}=="03"
    ATTRS{supports_autosuspend}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1':
    KERNELS=="1-1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{authorized}=="1"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bcdDevice}=="0300"
    ATTRS{bmAttributes}=="80"
    ATTRS{busnum}=="1"
    ATTRS{configuration}==""
    ATTRS{devnum}=="4"
    ATTRS{devpath}=="1"
    ATTRS{idProduct}=="2303"
    ATTRS{idVendor}=="067b"
    ATTRS{ltm_capable}=="no"
    ATTRS{manufacturer}=="Prolific Technology Inc."
    ATTRS{maxchild}=="0"
    ATTRS{product}=="USB-Serial Controller"
    ATTRS{quirks}=="0x0"
    ATTRS{removable}=="removable"
    ATTRS{speed}=="12"
    ATTRS{urbnum}=="22"
    ATTRS{version}==" 1.10"

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1':
    KERNELS=="usb1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{authorized}=="1"
    ATTRS{authorized_default}=="1"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceProtocol}=="01"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{bMaxPower}=="0mA"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bcdDevice}=="0413"
    ATTRS{bmAttributes}=="e0"
    ATTRS{busnum}=="1"
    ATTRS{configuration}==""
    ATTRS{devnum}=="1"
    ATTRS{devpath}=="0"
    ATTRS{idProduct}=="0002"
    ATTRS{idVendor}=="1d6b"
    ATTRS{interface_authorized_default}=="1"
    ATTRS{ltm_capable}=="no"
    ATTRS{manufacturer}=="Linux 4.13.0-36-generic xhci-hcd"
    ATTRS{maxchild}=="16"
    ATTRS{product}=="xHCI Host Controller"
    ATTRS{quirks}=="0x0"
    ATTRS{removable}=="unknown"
    ATTRS{serial}=="0000:00:14.0"
    ATTRS{speed}=="480"
    ATTRS{urbnum}=="98"
    ATTRS{version}==" 2.00"

  looking at parent device '/devices/pci0000:00/0000:00:14.0':
    KERNELS=="0000:00:14.0"
    SUBSYSTEMS=="pci"
    DRIVERS=="xhci_hcd"
    ATTRS{broken_parity_status}=="0"
    ATTRS{class}=="0x0c0330"
    ATTRS{consistent_dma_mask_bits}=="64"
    ATTRS{d3cold_allowed}=="1"
    ATTRS{device}=="0xa12f"
    ATTRS{dma_mask_bits}=="64"
    ATTRS{driver_override}=="(null)"
    ATTRS{enable}=="1"
    ATTRS{irq}=="122"
    ATTRS{local_cpulist}=="0-7"
    ATTRS{local_cpus}=="ff"
    ATTRS{msi_bus}=="1"
    ATTRS{numa_node}=="-1"
    ATTRS{revision}=="0x31"
    ATTRS{subsystem_device}=="0x65a1"
    ATTRS{subsystem_vendor}=="0x1558"
    ATTRS{vendor}=="0x8086"

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

xxx.rules
KERNEL==“ttyUSB*”, KERNELS==“1-1”, ATTRS{idProduct}“2303”, ATTRS{idVendor}“067b”, MODE=“0777”, SYMLINK+=“car1”