NFS frendarm9 test OK vm+fredora9-优快云博客

本文链接：https://blog.youkuaiyun.com/xxblinux/article/details/6433454

本文记录了嵌入式Linux系统启动的过程，包括USB HID核心驱动注册、ALSA音频设备初始化、网络配置及文件系统挂载等步骤，并展示了启动后的文件系统目录结构。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.21.
No device for DAI UDA134X
No device for DAI s3c24xx-i2s
S3C24XX_UDA134X SoC Audio driver
UDA134X SoC Audio Codec
asoc: UDA134X <-> s3c24xx-i2s mapping ok
ALSA device list:
#0: S3C24XX_UDA134X (UDA134X)
TCP cubic registered
lib80211: common routines for IEEE802.11 drivers
s3c2410-rtc s3c2410-rtc: setting system clock to 2005-08-09 14:54:36 UTC (1123599276)
eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
IP-Config: Complete:
     device=eth0, addr=192.168.1.2, mask=255.255.255.0, gw=192.168.1.100,
     host=csdn, domain=, nis-domain=net.xxblinux,
     bootserver=192.168.1.100, rootserver=192.168.1.100, rootpath=
Looking up port of RPC 100003/2 on 192.168.1.100
Looking up port of RPC 100005/1 on 192.168.1.100
VFS: Mounted root (nfs filesystem) on device 0:11.
Freeing init memory: 160K
[09/Aug/2005:06:54:42 +0000] boa: server version Boa/0.94.13
[09/Aug/2005:06:54:42 +0000] boa: server built Mar 26 2009 at 15:28:42.
[09/Aug/2005:06:54:42 +0000] boa: starting server pid=701, port 80

Try to bring eth0 interface up......NFS root ...Done

Please press Enter to activate this console.
[root@FriendlyARM /]# ls
bin 0m      root     sys      usr      www
[root@FriendlyARM /]# ls
bin      etc      lib      mnt      proc     sbin     tmp      var
dev      home     linuxrc opt      root     sys      usr      www
[root@FriendlyARM /]#