Using a Callout for Deep Inspection of Stream Data

Windows驱动_WFP之三Callout驱动的操作 还是没最终下那个决定,也许自己真的没有做大事的魄力,或者根本就做不成大事。做大事者,最忌,犹豫不决,婆婆妈妈,拖泥带水。但是,我有那么多的牵绊,我不得不考虑。其实,我心里已经做了决定,现在只是时间的问题。现在,心里的决定还是没有动摇的,这个我确信不疑的。所以,接下来的时间,我要好好准备。WFP差不多了,要开始到文件系统的minifilter,有时间的话,还要开始网络IO,还有javascript。 阅读详情

Packet Inspection Points

Incoming packets that are destined for an address that is assigned to the receiving computer (local host traffic) traverse up WFP layers in the following order:

计算机接收的数据包按照下面的次序经过wfp的过滤层:

IP Packet (Network Layer)
All IP packets, including IP packet fragments, are available for inspection at this layer. However, when packets are IPsec-protected, deep content inspection or modification cannot be performed at this layer because the packets are not yet authenticated or decrypted.
所有的IP数据包,包括IP数据包分片,可以在这一层监控。但是被IPSEC保护的数据包,不能执行深度内容检测或者修改,因为数据包还未授权或者解密。

Transport Layer
All stand-alone or fully reassembled packets are available for inspection at this layer. IPsec-protected packets have been authenticated or decrypted.
所有的单独或者重新组织的数据包可以在这一层检测。IPSEC保护的数据包已经被授权或者解密。

Application Layer Enforcement (ALE) Receive or Accept
The very first packet that arrives at a local endpoint is indicated at this layer. For example, an arriving TCP synchronize (SYN) segment or the first UDP message that is associated with a UDP flow would be indicated. Packets that are required to re-authorize a connection, for example, after a firewall policy change, are also indicated at this layer, and the ALE reauthorization flag will be set.
抵达本地端点的第一个数据包这这一层标识。例如,一个SYN数据包或者与一个UDP流关联的第一个udp信息应该被标识。当防火墙策略变化时,重新认证连接的数据包也会在这一层标识。

Datagram Data or Stream
UDP messages and non-ICMP error messages are indicated at the datagram data layer. TCP data flows (data streams only) are available for inspection at the stream layer.
UDP信息和非ICMP错误信息在数据报数据层标识,而tcp数据流在流层标识。

Outgoing packets that originate from an address that is assigned to the sending computer (local host sourced traffic) traverse down the following WFP layers:

计算机发送的数据按照以下方式经过WFP过滤层。

ALE Connect
TCP connection requests (made before the SYN segment is generated) and the first UDP message that is sent to a remote endpoint are indicated at this layer.
TCP连接请求(SYN数据包生成之前)、发往远端的第一个UDP信息会在这层标识

Datagram Data or Stream
Transport and ICMP Error
TCP connection requests (before the SYN segment is generated) and the first UDP message that is sent to a remote endpoint are indicated at this layer.

IP Packet
IP packet fragments are not indicated; inspection of outgoing IP fragments is currently unavailable.

IP packets or fragments that do not originate from, or are not destined for, an address that is assigned to the local computer are available for inspection at the forwarding layer. For example, if a packet that is destined for a local client is modified to have a nonlocal destination address and then is injected into the receive path, it will be injected into the forwarding layer. Similarly, if a packet that originates from a local source address is modified to have a nonlocal source address, it will be delivered to the forwarding layer after it is injected into the send path.   ?????????????


WFP Layer Requirements and Restrictions

The following requirements and restrictions apply to WFP layers.


Forwarding Layer
An IP packet will be delivered to the forwarding layer if IP forwarding is enabled for a packet that originates from, or is destined for, an address that is assigned to the computer and the packet is sent or received on a different interface than the interface on which the local address is assigned. By default, IP forwarding is disabled and can be enabled by using the netsh interface ipv4 set interface command for IPv4 forwarding or the netsh interface ipv6 set interface command for IPv6 forwarding.

The forwarding layer can forward each received fragment as it arrives or hold the fragments of an IP payload until all fragments have arrived and then forward them. This is known as fragment grouping. When fragment grouping is disabled (it is disabled by default), forwarded IP packet fragments are indicated to WFP one time. When fragment grouping is enabled, a fragment is indicated to WFP two times—first as the fragment itself, and again inside a fragment group that is described by a NET_BUFFER_LIST chain. WFP sets the FWP_CONDITION_FLAG_IS_FRAGMENT_GROUP flag when it indicates fragment groups to forwarding layer callouts. You can enable fragment grouping by using the netsh interface {ipv4|ipv6} set global groupforwardedfragments=enabled command. Fragment grouping is different than reassembly, which is the reconstruction of the original IP packet at the destination host.

The NET_BUFFER_LIST structure that is indicated at the forwarding layer can describe a full IP packet, an IP packet fragment, or an IP packet fragment group. While an IP packet fragment traverses the forwarding layer, it will be indicated two times to the callout: first as a fragment, and again, as a fragment inside a fragment group.

When a fragment group is indicated, the FWP_CONDITION_FLAG_IS_FRAGMENT_GROUP flag is passed as an incoming value to the callout driver's classifyFn callout function. In this case, the NET_BUFFER_LIST structure pointed to by the netBufferList parameter is the first node of a NET_BUFFER_LIST chain with each NET_BUFFER_LIST describing a packet fragment.

A forward injected packet will not be presented to any WFP layer. The injected packet can be indicated to the callout driver again. To prevent infinite looping, the driver should first call the FwpsQueryPacketInjectionState0 function before it continues with a call to the classifyFn callout function, and the driver should permit packets that have the injection state FWPS_PACKET_INJECTION_STATE set to FWPS_PACKET_INJECTED_BY_SELF or FWPS_PACKET_PREVIOUSLY_INJECTED_BY_SELF to pass through unaltered.

You can use the following command to view the current “Group Forwarded Fragments” setting for the system: netsh interface {ipv4|ipv6} show global.

Network Layer
IP packet fragments, which are indicated only for incoming paths, are indicated three times at this layer—first as an IP packet, again as an IP fragment, and a third time as part of a reassembled IP packet. WFP sets the FWP_CONDITION_FLAG_IS_FRAGMENT flag when it indicates fragments to network layer callouts.

When adding filtering conditions, FWP_MATCH_FLAGS_NONE_SET can be used together with the FWP_CONDITION_FLAG_IS_FRAGMENT flag to avoid the second indication. If the callout has to inspect only full packets (those that have not been fragmented and reassembled), it has to parse the IP header to avoid processing fragments that are indicated as IP packets. Alternatively, the callout can inspect packets at the transport layer.

Transport Layer and ALE
To be able to coexist with IPsec processing, callouts that inspect packets at the incoming transport layer must also register at the ALE receive and accept layer. Such a callout can inspect/modify most of the traffic at the transport layer, but it must also permit packets that are assigned to the ALE receive/accept layer. Such a callout must also inspect or modify the packets from the ALE layer. WFP sets the FWP_CONDITION_FLAG_REQUIRES_ALE_CLASSIFY flag when it indicates to the transport layer those packets that require ALE inspection. IPsec processing is deferred until those packets that create the initial “connection” and those that are required to re-authorize the connection reach the ALE layer.

Transport layer and ALE layer callouts must register themselves at a sublayer that is of lower weight than the universal sublayer. The built-in IPsec/ALE enforcement callouts reside at the universal sublayer.

The following table shows packet types that can be indicated at ALE layers. Be aware that some ALE layers do not always have a packet associated with their indication.

ALE layerTCP packetsUDP packets
Bind (resource assignment)not applicablenot applicable
Connectno packetfirst UDP packet (outgoing)
Receive/AcceptSYN (incoming)first UDP packet (incoming)
Flow Establishedfinal ACK (incoming & outgoing)first UDP packet (incoming & outgoing)
TransactionAspectSupport 源码解析 TransactionAspectSupport 前言功能分析 为什么源码解析类初始化和处理流程初始化执行流程 前言 上一篇文章我们说了AbstractPlatformTransactionManager这个类,我们通过这个类实现了,根据事物属性开始事物,和根据事物状态提交事物,回滚事物,也就是事物的基本操作,提供了PlatformTransactionManager的实现 (ps : 上一篇文章... 阅读详情

相关推荐

【高分子材料工程】嵌件注塑结构设计与工艺优化:金属-塑料复合件界面强度及失效预防技术规范

内容概要:本文系统阐述了嵌件注塑(Insert Molding)的设计参数、模具关键技术及失效预防措施,聚焦黄铜H62或304不锈钢与PA66-GF30材料组合的基准工况,提供可用于工程图纸、DFM检查、模具验收和工艺规程的量化依据。内容涵盖工艺边界界定、材料匹配与界面力学分析、结构设计参数(如包覆壁厚、滚花、倒角)、模具设计要点(定位、浇口、排气、冷却)、工艺参数窗口、八大失效模式及其对策、验证验收标准以及量产控制要求,强调通过DFM仿真、模流分析和DOE试模优化工艺,并列出常见设计误区与纠正方案。; 适合人群:从事注塑产品设计、模具开发、工艺工程及质量管理的工程技术人员,尤其适用于汽车、电子、医疗等行业中具备1-3年及以上相关经验的研发人员; 使用场景及目标:①指导嵌件注塑零件的可制造性设计与结构优化;②支持模具设计评审与验收;③制定试模调机与量产工艺规范;④开展失效分析与质量改进; 阅读建议:此资源兼具理论机制与工程实践,建议结合实际项目对照查阅,重点关注包覆壁厚、预热温度、浇口布置等关键参数的取值边界,并在应用非基准材料时进行线膨胀系数与收缩率的换算修正,避免直接套用数据。

ALE重新授权,简译笔记

ALE Reauthorization(重新授权 记为Reauth) 在WFP的Application Layer Enforcement(ALE)层的网络流量是用ALE flows来过滤的。一旦一个ALE flow被允许,所有这个ALE flow的流量都会被允许。Reauth是一个验证ALE flow permission的请求,典型的情况是网络策略更改。 根据第一个触发flow创建和授权的packet direction,ALE flows被赋予这个direction。Inbound ALE flows

enablewindow18的博客 750

智慧医共体AI大模型赋能智能体平台及AI场景应用规划方案(决策评审版).pptx

智慧医共体AI大模型赋能智能体平台及AI场景应用规划方案(决策评审版).pptx

Processing Classify Callouts

The filter engine calls a callout's classifyFn callout function when there is network data to be processed by the callout. This occurs when all the filtering conditions are true for a filter that sp

xbgprogrammer的专栏 763

14-15日周末听写音频.mp3

14-15日周末听写音频.mp3

图腾柱无桥PFC变换器+平均电流控制+PI电压双闭环前馈控制设计(Simulink仿真实现)

内容概要:本文系统研究了图腾柱无桥PFC变换器的高效率控制策略,采用平均电流控制结合PI电压双闭环前馈控制,利用Simulink平台构建完整的系统仿真模型,涵盖主电路拓扑、控制环路设计、关键参数计算及动态性能验证。研究重点在于提升功率因数、降低输入电流谐波含量,并确保输出电压的高度稳定性。通过仿真分析,全面评估了系统在启动、稳态运行及抗干扰等方面的性能表现,充分展现了现代电力电子变换器在高效能、高可靠性方面的先进控制技术应用; 适合人群:具备一定电力电子技术基础和Simulink仿真能力的电气工程及相关专业的研究生、科研人员及企业研发工程师; 使用场景及目标:①研究高效率PFC变换器的控制策略;②掌握图腾柱无桥PFC电路的工作原理与建模方法;③开展新能源、电动汽车充电、工业电源等领域中高性能整流器的技术开发与性能优化; 阅读建议:建议读者结合Simulink仿真模型同步操作,重点关注控制环路的设计细节与参数整定过程,深入理解平均电流控制与双闭环前馈控制的协同机制,同时可拓展至不同工况下的性能测试以增强工程实践能力。

WFP笔记

特点 WFP系统已经有数据过滤引擎的防火墙,没有规则,编写用户层的程序给WFP引擎设置规则,编写核心态的callout驱动处理WFP抓到的网络数据包做深度处理。比如加解密压缩解压缩之类在需要写驱动。 WFP分为 Layers:把规则分为若干组,GUID表示,子层https://docs.microsoft.com/zh-cn/windows/win32/fwp/basic-operati...

kernweak的博客 3214

OpenPnP/Arduino - 二手西门子电动飞达的通讯协议解析与实战

本文详细解析了二手西门子电动飞达的通讯协议,并通过Arduino控制板实现与开源贴片平台OpenPnP的集成。文章涵盖了硬件接口定义、协议帧结构分析、Arduino控制实战、OpenPnP集成技巧以及二手飞达翻新指南,为开发者提供了全面的技术指导和实战经验。

weixin_30411819的博客 202

wfp 禁用ip_WFP 层要求和限制

WFP 层要求和限制WFP Layer Requirements and Restrictions01/22/2019本文内容以下要求和限制适用于 WFP 层。The following requirements and restrictions apply to WFP layers.转发层Forwarding Layer如果为源自的数据包或目标为的数据包启用了 IP 转发,则 IP 数据包将传...

weixin_39788986的博客 507

古风仙侠少女三视图提示词,一键生成角色设定

3D中国写实CG风格,CG渲染质感,精细3D建模,PBR物理材质,细腻服装纹理,电影级灯光,丰富表情,高精度场景,次世代引擎画质。平视正交视角,统一光照,纯白背景,无文字无水印,避免强透视和动态变形。3D中国写实CG风格,CG渲染质感,精细3D建模,PBR物理材质,细腻服装纹理,电影级灯光,丰富表情,高精度场景,次世代引擎画质。3D中国写实CG风格,CG渲染质感,精细3D建模,PBR物理材质,细腻服装纹理,电影级灯光,丰富表情,高精度场景,次世代引擎画质。少女,古风仙侠少女气质,灵动、温婉、仙气。

欢迎来到鸾姝淡月博客,专为程序员和编程爱好者打造的技术博客。我们分享编程语言趋势、开发工具、编程哲学、职业发展等,助你掌握新技术,优化技能,激发编程热情。 1103

Agent应用实践之三十六 - AgentScope高阶用法:AG-UI

AI 大模型飞速进化,不懂 AI、不会用 Agent 的程序员,正在慢慢被行业淘汰。现在 AI 新技术迭代快到离谱:RAG 还没学明白,MCP 接踵而来;工具刚上手,Skills、各类新 Agent 概念又轮番刷屏;Manus还没看懂,就出来OpenClaw,OpenClaw热度还没退,又出来Hermes。越追越乱、越学越焦虑,永远在被动跟风,陷入学不完、跟不上、用不上的内耗。其实焦虑的根本原因,不是新技术太多,而是不懂大模型 Agent 应用底层原理,只会零散跟风,没有通用方法论。为此我专门推出Agent

代码让AI扣 146

WFP开发学习笔记

通过WFP获取、修改、放行、拦截数据

心碎瞬间的博客 8083

windows下宝塔安装教程

windows下宝塔安装教程 目录宝塔是什么?宝塔安装流程1.下载2.配置3.登录4.安装的环境套件小结 宝塔是什么? 宝塔是管理服务器的免费的软件,宝塔上面可以进行对你的服务器批量进行管理,对于运维人员来说还是必不可少的一个软件,值得使用。 宝塔安装流程 1.下载 链接: https://download.bt.cn/win/panel/BtSoft.zip 下载后安装买最好自定义目录,方便找 2.配置 下载完成后会出现这个页面,对着页面进行配置 点击默认密码复制进来,这里注意一点就是一定要查看

你在看屏幕的同时,屏幕也在注视着你 4425

WFP 原理

(WIN7 32位开发驱动: X86的纯净版的KEY: HTXFV-FH8YX-VCY69-JJGBK-7R6XP) 数据流处理: (入站和出站都是一样) 1. 一个包进入到了协议栈 2. 协议栈找到并发现一个shim(垫片),应该就是很多的sublayer注册的地方。 3. 该shim(垫片)调用该特定的sublayer层注册的Classfication分类进行处理。

jimk1983的专栏 7416

【图像处理】德里奇( Deriche)边缘检测器

Deriche边缘检测,同canny算法齐名,因此,知道canny原理,也有必要知道德里奇的检测原理。本篇专门针对德里奇算法展开讨论。

gongdiwudu的专栏 8685

智能车图像处理5-入门级分析4 ---环岛的状态机与补线

PS :入门级文章适合新手,如果已经有基础可以去看进阶篇文章。

taiyuezyh的博客 8270

wfp网络过滤框架总结(一)

一、基本术语定义 callout为扩展wfp性能提供的一个功能,由一系列call function和一个guid key组成,wfp内置了几个callouts。用户可以通过callout drivers自己添加callout。 callout driver实现一个或者多个callouts的内核驱动,这个驱动通过向filter engine注册callouts,来通知filter engine当...

zhangge3663的博客 5160

手把手教你学PCIE--基本概念:PCIe 初始化流程概述

硬件上电复位:系统上电时,所有 PCIe 设备都会进行复位。链路训练(Link Training):主机和设备之间通过链路训练状态机(LTSSM)协商链路参数(如速度和宽度)。配置空间访问:主机通过配置空间读写来发现和配置设备。资源分配:主机为设备分配内存映射 I/O 区域(BARs)、中断向量等资源。驱动程序加载和高级配置:操作系统加载设备驱动程序,并进行更高级的配置和状态监控。硬件上电复位:确保所有设备处于已知的良好状态。链路训练:主机和设备通过 LTSSM 协商链路速度和宽度。

MHD0815的博客 1376

window filter platform (wfp)修改TCP数据包的方法

问题描述:使用WFP重定向了TCP链接到本地localhost后,为了能够告诉应用层原始链接的地址和端口,需要修改数据包,即在三次握手后插入一个自定义包。在实现这个小小功能时,遇到了不少问题,走了很多弯路,希望在此记录一下,以备不时之需,也希望能够对有需要的朋友有所帮忙,因为WFP驱动,基本没有中文资料,所有的资料和问题都需要亲自到MSDN找,也是大费周折。 很显然,TCP的重定向,参考了MSDN

lxf20054658的专栏 1万+

老版QQ原生表情gif动态

这是老版的QQ表情,不过全是动态的的,Windows照片查看器是不会动的,可以右击用浏览器打开查看,再说一遍是老版的,只是分享给宁愿用老版也要动态的人。

大中型超市收银系统(可直接运行)

光步前台收银系统系统功能:商品销售、商品退货、挂单、收银员权限、会员销售、单品取消、整单取消、商品查询、脱机销售、脱机数据上传,基本资料下载,开钱箱、小票打印、收款结算,支持多币种付款方式(现金、储值卡、礼券、微信等),支持多种促销。运行环境:.net 4.0登陆信息用户名:1001 密码:123456内置商品信息,商品编码可输入00001000 - 00010000,测试效果相关功能键F5 结算 F9挂单 F11商品查询 F8退货 Insert单品取消 Del整单取消 F12开钱箱F2 会员 Ctrl+Z退出系统 Home 锁屏 相关源码待公开

Windows7以上使用WFP驱动框架实现IP数据包截取(二)

by fanxiushu 2017-10-23 转载或引用请注明原是作者。 接上文。 上文所说只要挂载其中的6个WFP过滤点,就可以截获IP层的所有数据包。 再把截获的数据包转发到应用层,应用层处理之后,再发给内核驱动,经过这样的过程,就完成一个数据包的处理过程。 IP数据包到达应用层之后,我们就可以随心所欲的实现某些功能。比如做流量分析,可以细化到端口和具体IP等, 可以做NAT转发,

fanxiushu的专栏 1万+

ET2012新版免狗免安装绿色软件

ET2012新版免狗免安祖昂绿色软件。,新界面,新视觉,

Windows过滤驱动 WFP代码基本流程的剖析 bypass前期准备

今天实际看一下,WFP的Callout驱动的代码。先从DriverEntry开始: 1,在DriverEntry需要创建驱动对象和设备对象, 1.1 由于不是PNP设备,需要设置创建驱动对象的标志为config.DriverInitFlags |= WdfDriverInitNonPnpDriver. 1.2 调用WdfDriverCreate创建驱动对象。 1.3 调用WdfControlDeviceInitAllocate通过驱动对象创建 WDFDEVICE_IN...

sway913的博客 2788

锂电池充电器电路设计 里面有电路

锂电池充电器电路设计 里面有电路 3.7V升压到5V电路设计。

WFP

1 out of 1 rated this helpful - Rate this topic Updated: May 15, 2008 On This Page   Introduction   Why You Should Convert Your Components to WFP   WFP Architect

Sunny_wwc的专栏 5659

Windows7以上使用WFP驱动框架实现IP数据包截取(一)

                                                                                                              By fanxiushu 2017-10-11 转载或引用请注明原始作者。 WFP(Windows Filtering Platform)驱动框架,也许很多人都不熟悉,

fanxiushu的专栏 1万+
上一篇: Processing Classify Callouts
下一篇: Calling Other Windows Filtering Platform Functions
xbgprogrammer
博客等级 码龄20年 36粉丝 106原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值