EMATM0061: Statistical Computing and Empirical

能源管理基于MATLAB的企业最大需量预测模型:月内峰值追踪与超限风险模拟分析系统设计 项目介绍 MATLAB 企业最大需量预测|月内峰值追踪与超限场景模拟 内容概要:本文介绍了一个基于MATLAB R2025b的企业最大需量预测项目,旨在通过构建月内峰值追踪与超限风险识别模型,实现对企业电力负荷的精细化管理。项目综合考虑时间周期、环境温度、生产强度、特殊日期及随机扰动等因素,构建模拟数据集,并采用装袋回归树和岭回归等机器学习模型进行负荷预测。通过滚动峰值追踪机制,系统动态整合历史真实值与未来预测值,生成月内最大需量趋势曲线,并结合预设阈值实现超限预警。同时支持多场景模拟,如增产、高温、设备集中启动等,评估不同工况下的超限风险,为企业错峰生产、储能调度等决策提供量化支持。项目注重实用性与兼容性,输出形式包括可视化图表、风险等级标识和多格式数据文件,适用于能源管理教学、工业负荷研究及智能用电原型开发。; 适合人群:具备一定MATLAB编程基础,从事能源管理、电力系统分析、工业自动化或智能制造领域的科研人员、工程师及高校师生,尤其适合工作1-3年、希望深入理解负荷预测与企业用电成本控制的技术人员。; 使用场景及目标:①实现企业月内最大需量的动态预测与滚动追踪,提前识别超限风险;②通过多因素场景模拟评估不同生产与环境条件下对需量的影响;③为错峰生产、设备启停优化、储能调度等能源管理决策提供数据支撑;④构建可复现、可扩展的负荷预测分析框架,服务于实际电能管理系统开发。; 阅读建议:此资源以模拟数据为基础,重点在于模型架构设计与管理应用逻辑,建议读者结合提供的代码实例,在MATLAB环境中动手复现数据生成、模型训练、峰值追踪与可视化全过程,并尝试调整特征参数或引入真实数据以深化理解。 立即下载

Assignment 4

EMATM0061: Statistical Computing and Empirical Methods, TB1, 2024

Introduction

This assignment is mainly based on Lectures 9 and 10. It is recommended that you watch the video lectures before starting.

Create an R Markdown for the assignment

It is a good practice to use R Markdown to organise your code and results. For example, you can start with the template called Assignment02_TEMPLATE.Rmd which can be downloaded via Blackboard. If you try to write mathematical

expressions in R Markdown, examples can be found in the document “Assignment_R MarkdownMathformulasandSymbolsExamples.rmd” (under the resource list tab on  blackboard course webpage).

You can optionally submit this assignment by 13:00 Monday 14th October, which    will help us understand your work but will not count towards your final grade. The submission point can be found under the assignment tab at Blackboards (click the   title “Assignment 04”).

Load packages

Load the tidyverse package:

library(tidyverse)

Additionally, download the file called “HockeyLeague.xlsx” from Blackboards which will be needed by some of the questions in this assignment.

1. Tidy data and iteration

Tidy data and iteration has been introduced in Lecture 9.

1.1. Missing data and iteration

In this task we investigate the effect of missing data and writing iterations in R.

(Q1) The following function performs imputation by mean. What library do we need to load to run this function?

impute_by_mean<-function(x){ mu<-mean(x,na.rm=TRUE) # first compute the mean of x impute_f<-function(z){ # coordinate-wise imputation if(is.na(z)){ return(mu) # if z is na replace with mean }else{ return(z) # otherwise leave in place } } return(map_dbl(x,impute_f)) # apply the map function to impute across vector }

(Q2) Create a function called “impute_by_median” which imputes missing values based on the median of the sample, rather than the mean.

You can test your function on the following sample vector:

v<-c(1,2,NA,4) impute_by_median(v) ## [1] 1 2 2 4

(Q3) Next generate a data frame. with two variables x andy. For our first variable x we have a sequence (x1,x2, ⋯ ,xn) where x1 = 0, xn = 10 and for each i = 1, ⋯ ,n − 1, xi+1 = xi + 0.1. For our second variable y we set yi = 5xi + 1 for i = 1, ⋯ ,n.

Generate data of this form. and place within a data frame called “df_xy” .

df_xy %>% head(5) ## x y ## 1 0.0 1.0 ## 2 0.1 1.5 ## 3 0.2 2.0 ## 4 0.3 2.5 ## 5 0.4 3.0

(Q4)

map2: The “map2()” function is similar to the “map()” function but iterates over two variables in parallel rather than one. You can learn more here

https://purrr.tidyverse.org/reference/map2.html. The following simple example shows you how “map2_dbl()” can be combined with the “mutate()” function.

df_xy %>% mutate(z=map2_dbl(x,y,~.x+.y)) %>% head(5) ## x y z ## 1 0.0 1.0 1.0 ## 2 0.1 1.5 1.6 ## 3 0.2 2.0 2.2 ## 4 0.3 2.5 2.8 ## 5 0.4 3.0 3.4

We will now use map2_dbl() to generate a new data frame with missing data.

First create a function “sometimes_missing” with two arguments: “index” and “value”. The “function” should return “NA” if index is divisible by 5 and return “value” otherwise.

Your function should produce the following outputs:

sometimes_missing(14,25) ## [1] 25 sometimes_missing(15,25) ## [1] NA

Next generate a new data frame called “df_xy_missing” with two variables x andy, but some missing data. For the first variable x we have a sequence (x1, ⋯ ,xn), which is precisely the same as with “df_xy” . For the second variable y we have a sequence    (y1, ⋯ ,yn) where yi = NA if i is divisible by 5 and otherwise yi = 5xi + 1. To generate the data frame. “d_xy_missing” you may want to make use of the functions “row_number(), map2_dbl(), mutate()” as well as “sometimes_missing()” .

Check that the first ten rows of your data frame are as follows:

df_xy_missing %>% head(10) ## x y ## 1 0.0 1.0 ## 2 0.1 1.5 ## 3 0.2 2.0 ## 4 0.3 2.5 ## 5 0.4 NA ## 6 0.5 3.5 ## 7 0.6 4.0 ## 8 0.7 4.5 ## 9 0.8 5.0 ## 10 0.9 NA

(Q5) Create a new data frame. “df_xy_imputed” with two variables x andy. For the   first variable x we have a sequence (x1, ⋯ ,xn), which is precisely the same as with  “df_xy” . For the second variable y we have a sequence (y′1, ⋯ ,y ′n) which is formed from (y1, ⋯ ,yn) by imputing all its missing values with the median. To generate

“df_xy_imputed” from “df_xy_missing” by applying a combination of the functions “mutate()” and “impute_by_median()” .

The first part of the data frame should look like this:

## x y ## 1 0.0 1.0 ## 2 0.1 1.5 ## 3 0.2 2.0 ## 4 0.3 2.5 ## 5 0.4 26.0 ## 6 0.5 3.5

1.2 Tidying data with pivot functions

In this task you will read in data from a spreadsheet and apply some data wrangling tasks to tidy that data.

First download the excel spreadsheet entitled ““HockeyLeague.xlsx”“ . The excel file contains two spread-sheets - one with the wins for each team and one with the

losses for each team. To read this spreadsheet into R we shall make use of

the”readxl” library. You may need to install the library: install.packages(“readxl”)

The following code shows how to read in a sheet within an excel file as a data frame. You will need to edit the “folder_path” variable to be the directory which contains your copy of the spreadsheet

library(readxl) # load the readxl library folder_path <- "./" #folder_path<-"C:/Users/" # set this to the name of the # directory containing "HockeyLeague.xlsx" file_name<-"HockeyLeague.xlsx" # set the file name file_path<-paste(folder_path,file_name,sep="") # create the file_path wins_data_frame<-read_excel(file_path,sheet="Wins") # read of a sheet from an xl file

Inspect the first 3 rows of the first five columns:

wins_data_frame. %>% select(1:5)%>% head(3) ## # A tibble: 3 × 5 ## ...1 `1990` `1991` `1992` `1993` ## ## 1 Ducks 30 of 50 11 of 50 30 of 50 12 of 50 ## 2 Eagles 24 of 50 12 of 50 37 of 50 14 of 50 ## 3 Hawks 20 of 50 22 of 50 33 of 50 11 of 50

A cell value of the form. “a of b” means that games were won out of a total of b for   that season. For example, the element for the “Ducks” row of the “1990” column is “30 of 50” meaning that 30 out of 50 games were won that season.

Is this tidy data?

(Q1) Now apply your data wrangling skills to transform the ““wins_data_frame””

data frame object into a data frame called ““wins_tidy”” which contains the same

information but has just four columns entitled ““Team”“,”“Year”“,”“Wins”“,”“Total”“ .

The”“Team”” column should contain the team name, the ““Year”” column should

contain the year, the ““Wins”” column should contain the number of wins for that

season and the ““Total”” column the total number of games for that season. The first column should be of character type and the remaining columns should be of integer

type. You can do this by combining the following functions: “rename()”, “pivot_longer()”, “mutate()” and “separate()” .

You can check the shape of your data frame. and the first five rows as follows:

wins_tidy %>% dim() # check the dimensions ## [1] 248 4 wins_tidy%>%head(5) # inspect the top 5 rows ## # A tibble: 5 × 4 ## Team Year Wins Total ## ## 1 Ducks 1990 30 50 ## 2 Ducks 1991 11 50 ## 3 Ducks 1992 30 50 ## 4 Ducks 1993 12 50 ## 5 Ducks 1994 24 50

(Q2) The ““HockeyLeague.xlsx”” also contains a sheet with the losses for each team  by season. Apply a similar procedure to read the data from this sheet and transform that data into a data frame called ““losses_tidy”” with four columns:

““Team”“,”“Year”“,”“Losses”“,”“Total”” which are similar to those in the ““wins_tidy”” data frame except for the ““Losses”” column gives the number of losses for a given      season and team, rather than the number of losses.

Your results should look like this:

losses_tidy %>% head(5) ## # A tibble: 5 × 4 ## Team Year Losses Total ## ## 1 Ducks 1990 20 50 ## 2 Ducks 1991 37 50 ## 3 Ducks 1992 1 50 ## 4 Ducks 1993 30 50 ## 5 Ducks 1994 7 50

You may notice that the number of wins plus the number of losses for a given team, in a given year does not add up to the total. This is because some of the games are neither wins nor losses but draws. That is, for a given year the number of draws is   equal to the total number of games minus the sum of the wins and losses.

(Q3) Now combine your two data frames, ““wins_tidy”” and ““losses_tidy”“, into a single data frame entitled”“hockey_df”” which has 248 rows and 9 columns: A

““Team”” column which gives the name of the team as a character, the ““Year””

column which gives the season year, the ““Wins”” column which gives the number of wins for that team in the given year, the “Losses” column which gives the number of  losses for that team in the given year and the ““Draws”” column which gives the

number of draws for that team in the given year, the ““Wins_rt”” which gives the     wins as a proportion of the total number of games (ie. “Wins/Total”) and similarly the ““Losses_rt”” and the ““Draws_rt”” which gives the losses and draws as a

proportion of the total, respectively. To do this you can make use of the “mutate()” function. You may also want to utilise the “across()” function for a slightly neater solution.

The top five rows of your data frame. should look as follows:

hockey_df %>% head(5) ## # A tibble: 5 × 9 ## Team Year Wins Total Losses Draws Wins_rt Losses_rt Draws_rt ## ## 1 Ducks 1990 30 50 20 0 0.6 0.4 0 ## 2 Ducks 1991 11 50 37 2 0.22 0.74 0.04 ## 3 Ducks 1992 30 50 1 19 0.6 0.02 0.38 ## 4 Ducks 1993 12 50 30 8 0.24 0.6 0.16 ## 5 Ducks 1994 24 50 7 19 0.48 0.14 0.38

(Q4) To conclude this task generate a summary data frame which displays, for each team, the median win rate, the mean win rate, the median loss rate, the mean loss     rate, the median draw rate and the mean draw rate. The number of rows in your

summary should equal the number of teams. These should be sorted in descending order or median win rate. You may want to make use of the following functions:

“select()”, “group_by()”, “across()”, “arrange()” .

## # A tibble: 8 × 7 ## Team W_md W_mn L_md L_mn D_md D_mn ## ## 1 Eagles 0.45 0.437 0.25 0.279 0.317 0.284 ## 2 Penguins 0.45 0.457 0.3 0.310 0.133 0.232 ## 3 Hawks 0.417 0.388 0.233 0.246 0.32 0.366 ## 4 Ducks 0.383 0.362 0.34 0.333 0.25 0.305 ## 5 Owls 0.32 0.333 0.3 0.33 0.383 0.337 ## 6 Ostriches 0.3 0.309 0.4 0.395 0.267 0.296 ## 7 Storks 0.3 0.284 0.22 0.283 0.48 0.433 ## 8 Kingfishers 0.233 0.245 0.34 0.360 0.4 0.395

1.3 Simulation experiments of probabilities

(Q1) The following code was used in last week’s assignment to compare a

theoretical probability with an estimated probability in sampling with replacement.  Now that we have learnt iterations with the map functions, can you rewrite the code using “map()” (and its variants)?

num_red_balls<-3 num_blue_balls<-7 total_draws<-22 prob_red_spheres<-function(z){ total_balls<-num_red_balls+num_blue_balls log_prob<-log(choose(total_draws,z))+ z*log(num_red_balls/total_balls)+(total_draws z)*log(num_blue_balls/total_balls) return(exp(log_prob)) } itermap <- function(.x, .f) { result <- list() for (item in .x) { result <- c(result, list(.f(item))) } return(result) } itermap_dbl <- function(.x, .f) { result <- numeric(length(.x)) for (i in 1:length(.x)) { result[i] <- .f(.x[[i]]) } return(result) } num_trials<-1000 # set the number of trials set.seed(0) # set the random seed num_reds_in_simulation <- data.frame(trial=1:num_trials) %>% mutate(sample_balls = itermap(.x=trial, function(x){sample(10,22, replace = TRUE)})) %>% mutate(num_reds = itermap_dbl( .x=sample_balls, function(.x) sum(.x<=3) ) ) %>% pull(num_reds) prob_by_num_reds <- data.frame(num_reds=seq(22)) %>% mutate(TheoreticalProbability=prob_red_spheres(num_reds)) %>% mutate(EstimatedProbability= itermap_dbl(.x=num_reds, function(.x) sum(num_reds_in_simulation==.x))/num_trials)

(Q2) Next, we can make use of “pivot_longer” and “ggplot” to create a plot to compare the theoretical probability with the estimated probability in the data frame “prob_by_num_reds”. Your plot should look similar to the one below.

prob_by_num_reds %>% pivot_longer(cols=c("EstimatedProbability","TheoreticalProbability"), names_to="Type",values_to="count") %>% ggplot(aes(num_reds,count)) + geom_line(aes(linetype=Type, color=Type)) + geom_point(aes(color=Type)) + scale_linetype_manual(values = c("solid", "dashed"))+ theme_bw() + xlab("Number of reds") + ylab("Probabilities")

Try to make sense of each line in the above code.

Matlab实现使用遗传算法的混合能源系统优化.rar 立即下载

相关推荐

压液氧(LOX)火箭发动机涡轮泵级建立了一条自动化的基于模型的系统工程(MBSE)与多学科设计优化(MDO)流水线.rar

压液氧(LOX)火箭发动机涡轮泵级建立了一条自动化的基于模型的系统工程(MBSE)与多学科设计优化(MDO)流水线.rar

EMATM0061: Statistical Computing and Empirical Methods TB1 2024 1

df again?–>New File–>–>•••[,2][,3][,2][,3]ΘZ and YΘ−[,2]−1Y in R.−[,2][,3]−−1?} }

bilimint的博客 847

基于斜坡补偿的Buck电路峰值电流+电压电流双闭环控制【附说明文档】(Simulink仿真实现)优快云首页发布文章优快云同步助手LLC谐振变换器开环+闭环软启动仿真设计(Simulink

内容概要:本文围绕三电平VIENNA整流器的双闭环控制与中点电位平衡问题展开仿真研究,提出了一种基于上下电容电压差值补偿的中点电位平衡策略。该策略在传统电压电流双闭环PI控制的基础上,引入电容电压差值作为反馈信号,通过SVPWM调制中冗余小矢量的时间分配实现中点电荷的定向调节,从而在不改变主控制结构的前提下有效抑制中点电位偏差。仿真结果表明,该方法不仅确保直流母线电压稳定跟踪800V给定值,还能显著提升上下电容电压的均衡度,同时保持输入电流低谐波水平,验证了控制策略的可行性和有效性。; 适合人群:电力电子、电气自动化及相关专业的研究生、科研人员及工程技术人员,具备一定的MATLAB/Simulink仿真基础和电力电子拓扑知识背景者更佳。; 使用场景及目标:①掌握三电平VIENNA整流器的工作原理与中点电位波动的成因;②理解电压电流双闭环PI控制的设计要点与参数整定原则;③学习基于差值补偿的中点电位平衡控制策略及其与SVPWM的协同机制;④应用于充电桩、航空电源、通信电源等中大功率单向整流场合的控制系统设计与优化。; 阅读建议:建议结合文中提供的仿真模型与参数设置进行动手实践,重点关注中点电位平衡投入前后电容电压波形的变化,对比分析不同工况下的系统动态响应,深入理解控制策略的作用机理。同时可进一步探索在电网不平衡、轻载等复杂工况下的控制性能,以拓展应用场景。

EMATM0061: Statistical Computing and Empirical Methods TB1 2024 9

一一“scalex。

tellttyby的博客 580

自适应多机器人编队规划,以包围和跟踪具有运动和可见性约束的目标(Matlab代码实现)

内容概要:本文针对“自适应多机器人编队规划,以包围和跟踪具有运动和可见性约束的目标”开展研究,提出一种基于Matlab的仿真方法,实现多机器人在动态环境中对移动目标的协同包围与持续跟踪。该方法综合考虑了机器人的运动学约束与传感器的视线(visibility)限制,设计了分布式控制策略与自适应编队算法,能够在复杂环境下有效维持编队结构的稳定性和任务执行的鲁棒性。研究详细阐述了系统建模过程、控制律设计原理、编队形成与保持机制,并通过Matlab代码实现了完整的仿真验证,展示了算法在不同动态场景下的适应能力与性能优势; 适合人群:具备机器人学、自动控制理论、多智能体系统等相关基础知识,熟悉Matlab编程语言,从事智能系统、协同控制、路径规划与自主导航等方向的研究生、科研人员及工程技术人员; 使用场景及目标:①应用于安防监控、环境探测、灾害救援等场景中的多机器人目标围捕与跟踪任务;②为多智能体协同控制、分布式编队保持、避障与可见性维护等关键技术提供可复现的算法框架与仿真平台;③辅助高校与科研机构在相关领域的教学演示与科研创新,深化对自适应控制与分布式协同机制的理解; 阅读建议:建议读者结合提供的Matlab代码逐模块分析其实现逻辑,重点关注控制律设计、约束处理与自适应机制部分,可通过调整机器人数量、目标轨迹、传感器参数等进行扩展性实验,以深入掌握多机器人协同系统的动态行为与优化方法。

patch_1.23.0.2584_game_No6.android.pak

patch_1.23.0.2584_game_No6.android.pak

EMATM0061: Statistical Computing and Empirical Methods TB1 2024 4

EMATM0061:EmpiricalMethods,TB1,datay want tomakeuseofthefunctions。

withyouand的博客 826

状态估计【卡尔曼滤波kalman】UKF、EKF、粒子滤波PF学习与研究(Matlab代码实现)

内容概要:本文系统地研究了无迹卡尔曼滤波(UKF)、扩展卡尔曼滤波(EKF)和粒子滤波(PF)在非线性系统状态估计中的理论基础与实际应用,并结合Matlab代码实现进行了深入剖析。内容涵盖三种滤波算法的核心原理、数学推导及其在轨迹估计等工程问题中的具体实施方法。通过详尽的Matlab编程实例,展示了如何利用这些先进滤波技术解决如目标跟踪、传感器融合等复杂问题,并特别探讨了BP神经网络与EKF结合的优化训练策略以及粒子滤波在提高状态跟踪精度方面的潜力。该资料为希望掌握现代状态估计算法的研究人员和技术爱好者提供了一套完整的理论与实践指南; 适合人群:具备一定编程基础,尤其是熟练使用Matlab工具,且对控制理论、信号处理或相关工程技术领域有初步了解的研发人员和高校学生; 使用场景及目标:① 深入理解UKF、EKF和PF的基本概念及其在非线性动态系统中进行状态变量估计的应用;② 通过Matlab代码实践加深对各滤波器工作机制的理解,能够独立开发相应的算法以应对诸如轨迹预测、多源信息融合等实际挑战;③ 探索将BP神经网络与EKF相结合的新途径,以期提升模型的学习效率和预测准确性; 阅读建议:此资源不仅提供了坚实的理论支撑,还包括丰富的代码示例,建议读者按照文档结构循序渐进地学习,同时动手实现每一个案例,以便更深刻地把握各种滤波技术的关键细节。对于致力于深入研究状态估计领域的专业人士而言,这是一份极具价值的学习材料。

EMATM0061: Statistical Computing and Empirical Methods TB1 2024 3Processing

#AgeDayMonthYearSpeciesWingWeightTail##1I199199213:30RT385920219##2I229199210:30RT376930221##3I239199212:45RT381990235##4I239199210:50CH265470220##5I279199211:15SS205170“choose()”

youandmet的博客 1101

DXF、DWG工程制图文件查看器

DXF、DWG工程制图文件查看器。 可以在界面中进行测量(包括距离、面积、角度等等) 无需版权,放心使用。

HID报告描述符实战解析:从Usage到Item的完整设计流程

本文深入解析了HID报告描述符的设计流程,从核心概念Usage(用途定义)入手,详细阐述了如何通过Item(条目)的三种角色——全局、局部与主干,构建出能被系统正确识别的设备“说明书”。文章以标准USB鼠标和键盘为例进行实战拆解,并介绍了使用Report ID与自定义设备等进阶设计方法,帮助开发者掌握这一实现USB设备即插即用的关键技术。

weixin_29230865的博客 283

EMATM0061: Statistical Computing and Empirical Methods TB1 2024 5R

EMATM0061:EmpiricalMethods,TB1,inRMarkdown,e foundin thedocumenttabonblackboard⋯⋯⋯, Yn?∑x∈ℝx⋅px (x).Σi1αi E(Xi)E(f1(X1)⋯⋯Cov(X,Y)E[(X−X(‾)⋅(Y−Y(‾))]whereX(‾)andY(‾)are theofXandY。

withyouand2的博客 1044

(一)利用Python实现数据集读取,Python基本文件操作介绍

机器学习是计算机对大量数据的分析过程,在机器学习的实际项目中,通常都需要准备数据集,数据集通常包含的数据数量是庞大的。例如,在处理计算机视觉领域的项目时,每一张图片都是一个单独的文件,为了提高模型训练的效果,图片数量通常会比较多,因此需要合理且高效的操作将所有的图片数据读取。本篇旨在介绍如何用Python对海量文件进行遍历,也是机器学习实践的第一步。.........

ZZR2631574030的博客 6357

EMATM0061: Statistical Computing and Empirical Methods TB1 2024 2R

Hint: type?##Crop##21254Ωc?⊆Ω .

competionty的博客 841

雷达仿真:FMCW TDMA-MIMO 3D点云获取方法

2 信号建模摘要:通过设置时分复用(TDMA)波形结合FMCW毫米波雷达仿真获取目标的距离、速度和方位角3D点云信息。在本案例中,首先通过发射天线交替发射FMCW波形并通过接收天线依次接收回波信号从而得到雷达原始数据,其次对获取的原始数据依次经行距离、速度、角度估计从而输出目标的3D点云。阅读本文档,你将对TDMA-MIMO雷达的基本原理、毫米波雷达距离估计、速度估计以及角度估计的基本原理有所了解,另外CA-CFAR恒虚警以及MUSIC-DOA估计在本案例中也有所涉及。1 TDMA-MIMO原理。

Poulen的博客 6963

Camunda 7.x 系列【22】全局监听器

Camunda支持义一个全局ExecutionListener和一个全局TaskListener,会捕获流程中发生的所有事件的通知,这样可以定义一个全局的审批人检查监听器,作用于所有用户任务。

记录知识、锤炼自我 2942

EMATM0061: Statistical Computing and Empirical Methods TB1 2024 8C/C++

μ= 1,σ2 = 6 andσ0(2) = 4.Let ^(y)∈φy(^) .

aboutyou2的博客 851

华为OD技术面真题 - JAVA开发 - 1

汇总华为OD技术面八股JAVA八股,高频技术真题并提供详细解答。

qq_45776114的博客 1208

EMATM0061 Statistical Computing and Empirical Methods

df again?if(num<2){a<-1。

wx____codinghelp的博客 2201

YOLOv9改进策略 | Conv篇 | 2024最新ECCV最新大感受野的小波卷积WTConv助力YOLOv9有效涨点

本文给大家带来的改进机制是一种新的卷积层,称为WTConv(小波卷积层),它利用小波变换(WT)来解决卷积神经网络(CNN)在实现大感受野时遇到的过度参数化问题。WTConv的主要目的是通过对输入数据的不同频率带进行处理,使CNN能够更有效地捕捉局部和全局特征,WTConv成功解决了CNN在感受野扩展中的参数膨胀问题,提供了一种更为高效、鲁棒且易于集成的卷积层解决方案,我将其用于二次创新YOLOv9中的RepNCSPELAN4机制可以减少一定的参数量和计算量,达到一个可观的轻量化作用。

Snu77的博客 1544

手把手教你学基带SOC芯片(4.4.9)--基带芯片的电源管理实例:高通 Snapdragon 系列实例(十)

Snapdragon 888 通过支持多种深度睡眠模式,如 AOAC 模式、低功耗模式和深度睡眠模式,以及智能电源管理技术,实现了对功耗的精细管理。这些模式不仅延长了设备的电池寿命,还确保了用户在各种使用场景下的良好体验。无论是保持网络连接、限制后台活动,还是完全关闭不必要的功能,Snapdragon 888 都能够灵活应对,提供高效的功耗管理方案。

MHD0815的博客 741

【FDE知识库】(1):AI 编程时代开发语言选型分析,云使用go,企业用java,算法python,底层c

AI 编程时代,开发语言选型需综合考量AI适配度、编译速度、跨平台与学习成本。Python以海量语料和即时执行成首选,适用于AI/ML与原型开发;TypeScript凭借类型系统与秒级构建,成为前端及应用层主流;Go以极速编译与统一风格,契合AI代理高效迭代需求。Rust/C++虽性能强,但编译慢、学习成本高,不适于快速试错。综合推荐:优先选Python、TypeScript、Go,兼顾效率与生态,实现最优AI协作体验。

freewebsys的专栏 658

【即插即用模块】注意力篇 | TGRS 2025 | CDFIM:通道+空间多尺度注意力,双模态特征融合增强,性能翻倍!

C2DFF-Net提出了一种轻量级跨模态特征融合模块CDFIM,通过模态差异感知和多尺度深度滤波增强双模态互补信息。该模块采用通道-空间注意力协同机制,以极低计算成本(仅增加0.26M参数)提升多模态目标检测性能,在三个遥感数据集上平均提升mAP约1.7%。适用于无人机等边缘设备的实时检测任务,为跨模态融合提供高效解决方案。

主要更新底层视觉(去噪、超分等)相关的科研内容,形式为【论文精读】+【论文复现】 628
上一篇: ECO3121 Problem Set 3
下一篇: CHEE 4703: Process Dynamics and Control
wx____codinghelp
博客等级 码龄2年 771粉丝 115原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值