CS 6613 Robot Path Planning

ERA5数据驱动WRFV4.4实战:单层嵌套配置与关键报错排查指南 本文详细介绍了使用ERA5再分析数据驱动WRFV4.4模式进行单层嵌套模拟的完整实战流程。内容涵盖从数据精准下载、WPS前处理配置、WRF核心参数设置到高频报错的深度排查与解决方案,旨在帮助初学者在有限服务器资源下,高效完成WRF模拟并规避常见陷阱。 阅读详情


CS 6613 Fall 2024 Project 1: Robot Path Planning
Total # points = 100.
Project Description: Implement the A* search algorithm with graph search (no repeated states) for the robot path planning problem as described below. The inputs to your program are the start and goal positions of a point robot, and a 2D integer array that represents the robot workspace. The robot can move from cell to cell in any of the eight directions as shown in Figure 2. The goal is to find the lowest-cost path between the start position and the goal position, and avoiding obstacles along the path. The workspace is represented as an occupancy grid as shown in Figure 1, where the black cells represent obstacles. The red line in the figure depicts a path from the start position to the goal position. (Note: the path in the figure is not the lowest-cost path as required in our project.)
where
Formulation: The problem can be formulated in the following way. Each cell in the workspace is a state. The white cells are legal states and the black cells are illegal states. The actions are the eight moves as defined in Figure 2. The step cost for the actions is the sum of the angle cost and the distance cost; i.e.,
𝑐𝑐(𝑠𝑠, 𝑎𝑎, 𝑠𝑠′) = 𝑐𝑐𝑎𝑎(𝑠𝑠, 𝑎𝑎, 𝑠𝑠′) + 𝑐𝑐𝑑𝑑(𝑠𝑠, 𝑎𝑎, 𝑠𝑠′)
3, 5, 7.
𝑐𝑐𝑎𝑎(𝑠𝑠, 𝑎𝑎, 𝑠𝑠′) = 𝑘𝑘 ∗ ∆𝜃𝜃 ; let 𝑐𝑐𝑎𝑎(𝑠𝑠, 𝑎𝑎, 𝑠𝑠′) = 0 if s is the initial state (start position) 180
∆𝜃𝜃 = |(𝜃𝜃(𝑠𝑠′) − 𝜃𝜃(𝑠𝑠)|; if ∆𝜃𝜃 > 180, let ∆𝜃𝜃 equals 360 − ∆𝜃𝜃
𝑐𝑐𝑑𝑑(𝑠𝑠, 𝑎𝑎, 𝑠𝑠′) = 1 for horizontal and vertical moves 0, 2, 4, 6 and √2 for diagonal moves 1,
In the above, s is the current state, a is the action and s’ is the next state. The angle cost is to penalize any change in the direction of the robot between two consecutive moves. k is a constant that we can set to control the amount of penalty we want to impose for angle change. For the initial state (start position), we let the angle cost between the initial state s and next state s’ equals to 0. The distance cost is for the distance travelled in an action. Let h(𝑛𝑛) be the Euclidian distance between the current position and the goal position. h(𝑛𝑛) thus defined is admissible in this problem. During the search, only legal states (cells without obstacles) will be added to the tree.
Input and output formats: The workspace in the test input files is of size 30 × 50 (rows x columns.) We will use the coordinate system as shown in Figure 3 below. The coordinates of the lower-left corner cell are (𝑖𝑖, 𝑗𝑗) = (0,0). The input file contains 31 lines of integers as shown in Figure 4 below. Line 1 contains the (𝑖𝑖, 𝑗𝑗) coordinates of the start and goal positions of the point robot. Lines 2 to 31 contain the cell values of the robot workspace, with 0’s representing white cells, 1’s representing black cells, 2 representing the start position and 5 representing the goal position. Line 2 contains values for (𝑖𝑖, 𝑗𝑗) = (𝑖𝑖, 29), with 𝑖𝑖 = 0 to 49. Line 31 contains values for (𝑖𝑖, 𝑗𝑗) = (𝑖𝑖, 0), with 𝑖𝑖 = 0 to 49, etc. The integers in each line are separated by blank spaces.
Your program will produce an output text file that contains 34 lines of text as shown in Figure 5 below. Line 1 contains the depth level d of the goal node as found by the A* algorithm (assume that the root node is at level 0.) Line 2 contains the total number of nodes N generated in your tree (including the root node.) Line 3 contains the solution (a sequence of moves from the root node to the goal node) represented by a’s. The a’s are separated by blanks. Each a is a move from the set {0,1,2,3,4,5,6,7}. Line 4 contains the f(n) values of the nodes (separated by blanks,) from the root node to the goal node, along the solution path. There should be d number of a values in line 3 and

CS 6613 Fall 2024 Project 1: Robot Path Planning E. K. Wong
d+1 number of f values in line 4. Lines 5 to 34 contain values for the robot workspace, with 0’s representing white cells, 1’s representing black cells, 2 representing the start position, 5 representing the goal position, and 4’s representing cells along the solution path (excluding the start position and the goal position.)
  Figure 3. Coordinate system of the work space.

CS 6613 Fall 2024 Project 1: Robot Path Planning E. K. Wong
Testing your program: Three input test files will be provided on Brightspace for you to test your program. For each input file, try two different runs: one with k = 2 and one with k =4. You can let k be an interactive input parameter in your program.
Recommended languages: Python, C++/C or Java. If you would like to use a different language, send me an email first.
Teammate: You can work on the project by yourself or form a team of two to work on the project. You can discuss with your classmates how to do the project, but every team is expected to write their own code and submit their own project.
Submit on Brightspace:
• Your source code file. Put comments in your source code to make it easier for someone else to read your program. Points will be taken off if you do not have comments in your source code.
• The output files generated by your program for the three input test files.
• A PDF report that contains instructions on how to run your program. If your program requires compilation, instructions on how to compile your program should also be provided. Also, copy and paste your output files and your source code onto the PDF file. This is in addition to the source code file and output files that you have to hand in
separately, as described in items (1) and (2) above.
• If you work in a team of two, only one partner needs to submit the project on Brightspace
but put down both partners’ names on the source code and the PDF report.
 d
N
a a a ....a
f f f .....f
m m m m m m ....m m m m m m m ....m ...
m m m m m m ....m
Figure 5. Output file format (34 lines.) d, N, a’s, and m’s are integers. f’s are floating point numbers. The a’s, f’s and m’s are separated by blanks.
 nnnn
m m m m m m ....m m m m m m m ....m ...
m m m m m m ....m
Figure 4. Input file format (31 lines.) n’s and m’s are integers separated by blanks.
 

LabVIEW新手必看:5个工业自动化实战项目从零搭建(附完整代码) 本文为LabVIEW新手提供了5个从零开始的工业自动化实战项目指南,涵盖数据采集、状态机控制、PID闭环、振动监测及多站协同监控。通过详细的架构解析和关键代码片段,帮助读者快速掌握LabVIEW图形化编程的核心逻辑与工程化思维,并附完整代码实现。 阅读详情

相关推荐

【Linux】实际项目应该如何完成?--安防监控系统项目的总结

到目前为止我也做个5、6个嵌入式项目,但以往都是从零开始自己做,也就是毫无计划,想到那里做那里,有想法就会去实现,就这样导致我碰到了很多坑,也消耗了我许多时间,当然,不是说这样不好,因为在其中我也得到了一个很好的锻炼与练习,但是这不适用于在工作中去这样做。...

修成真的博客 6734

Web 版翻译者资料库

本项目是桌面版《翻译者资料库》的 Web 移植版,基于 Spring Boot 3.3、Thymeleaf、Bootstrap 5.3 与 MySQL 8.0 构建。它面向翻译写作提供资料、词汇、句库、文本工具、对照制作、查找、备份恢复及旧库迁移等功能,完整继承桌面版核心业务规则,支持一键启动与离线访问。

howard2005的专栏 199

给新考上北大软件与微电子学院的同学——利用北大资源

利用北大资源 首先,恭喜大家考入北京大学!希望软院成为各位人生旅途中快乐的一站! 说明:限于本人搜集能力有限,本文只列出本人常利用的资源(上课老师会告知的资源也不在此列),本文所述的资源只是北大可利用资源的一个子集。 一、 图书馆资源:北京大学图书馆的资源数量,我就不多废话了,这里主要说一样怎样利用这些资源。 a) 传统资源分布及查找:这种资源主要包括纸质书箱、杂志、光盘等内...

Felomeng的技术博客 1万+

Jackson 序列化 / 反序列化注解 完整版笔记

Jackson 序列化 / 反序列化注解 完整版笔记

handsome_sai的博客 308

零基础也能懂的Arduino ESP32离线安装包图文教程

手把手教你完成Arduino ESP32离线安装包的配置,无需联网也能快速搭建开发环境,适合初学者和网络受限用户,轻松实现arduino esp32离线安装包部署。

weixin_36213081的博客 2688

STM32 SAI接口实战:用CubeMX快速配置多通道音频采集(附DMA优化技巧)

本文详细介绍了如何使用STM32的SAI接口通过CubeMX快速配置多通道音频采集系统,并提供了DMA双缓冲优化技巧。内容涵盖TDM模式配置、时钟同步、DMA优化及常见问题排查,帮助开发者高效实现高速数据采集应用。

weixin_42549037的博客 228

MCP 协议会成为前端 AI 工程的标准接口吗?

MCP(Model Context Protocol)正在成为连接 AI 模型与外部工具、数据源的一层通用协议。本文从 MCP 的核心机制出发,分析它在浏览器与前端工程中的落地边界,讨论它能否成为前端 AI 工程的标准接口,并给出当下更务实的架构选择建议。

m0_62937412的博客 387

vue2/3 - 详细实现高德地图轨迹回放,vue高德地图车辆历史行驶轨迹播放,在地图上绘制行程轨迹|起点和终端的路程绘制|用户运动轨迹绘制及播放等(支持开始/暂停、进度条拖放、控制播放轨迹的倍速等)

vue2,vue3,nuxt,高德地图,轨迹,vue高德地图轨迹回放,历史轨迹回放,轨迹回放功能支持倍速及进度条拖拽,VUE高德地图轨迹回放、倍速调整、进度条拖拽,vue3高德地图轨迹回放,Vue实现地图路径回放,vue中使用高德地图实现历史轨迹回放并能控制播放轨迹的倍速,多条轨迹陆续播放,巡航轨迹做带进度条和倍速的轨迹回放,Vue高德地图路径回放,历史轨迹回放并能控制播放轨迹的倍速,使用高德地图实现轨迹播放和进度条控制,vue高德地图如何实现轨迹回放,高德地图做轨迹绘制用什么api,高德轨迹API,驾车轨

✅ 精选推荐文章 1万+

LangGraph 本地 build 频频翻车,最终在服务器跑通流式对话

先说结论:我本地那个,一次都没成功过。三次,三次,全挂在拉镜像上。而顺得像刚上过油。这就很像我高中那辆自行车:骑着能走,一上锁就坏。那天晚上我盯着终端里那行红字看了很久,想的不是技术方案,想的是——为什么同一个工具,可以一边让我觉得自己很行,一边让我觉得自己不太行。

人工智能AI技术 323

YOLOv5源码逐行超详细注释与解读(5)——配置文件yolov5s.yaml

全网最详细的YOLOv5源码解读之配置文件yaml。逐行注释,逐句讲解,一文带你了解yaml。小白必看!

路人贾的博客 1万+

《使用R包ggtree进行进化树的绘制与美化》

都2023年了,才去使用Y叔早在2018年发表的进化树构建利器——ggtree。刚好最近在做基因家族分析,进化树的构建与美化确实有点麻烦,先前使用MEGA11进行了绘制,但图像简陋,于是导出了nwk文件,准备使用其他软件进行美化。这里,我使用ggtree包进行操作。

沉香best的博客 6898

带着小白学习-微服务-6 实战:网关

地址栏输入:http://localhost:8088/goods/index,这时候就不是到8100端口去调用了,而是8088直接通过路由转发,分别到nacos对应的goods对应的服务中区调用。** 可以看出,这里将前面已经正常运行的server-store子工程(库存服务,服务提供方),server-goods子工程(商品服务,服务消费方)。(1)uri: lb://store 代表要到nacos的注册中心的服务列表中找到服务名为store的微服务;,网关是做路由转发,不是服务调用;

wdyan297的博客 250

医疗工具识别(手术器械计数):基于YOLOv8的智能手术器械管理系统

YOLOv8是Ultralytics公司于2023年推出的最新一代目标检测算法,相比前代YOLOv5,在精度和速度上都有显著提升。Anchor-free检测:不再使用预定义的anchor boxes,简化了检测流程更高效的骨干网络:采用CSPDarknet53作为特征提取网络多尺度特征融合:通过PANet结构实现更好的小目标检测损失函数优化:使用CIoU损失提高边界框回归精度YOLOv8提供了多种规模的模型(n/s/m/l/x),可根据实际需求在精度和速度之间进行权衡。

YOLO 481

海外平台频繁弹验证?从 DNS、WebRTC 到浏览器指纹的环境异常排查清单

在运营多地区海外平台账号时,即使代理节点通畅、TCP 握手成功,仍可能遇到频繁人机验证、地区限制、播放失败等异常。核心结论是:这类问题往往不在网络传输层,而在浏览器环境参数与网络出口之间的逻辑自洽性。本文从 DNS 泄漏、WebRTC 穿透、时区与语言匹配、Canvas/WebGL 指纹、TLS 特征五个维度,给出一份可复现的环境异常排查清单,并对比个人手动配置与工程化环境管理方案的适用边界。适用于跨境运营、多账号运维团队。

P1Browser【p1指纹浏览器】的博客 239

IEM模型,地表粗糙度模拟

利用微波反演土壤水分时候,利用IEM模型可以实现对随机地表的模拟

NTscan扫描工具

ntscan是一个扫描器,可以扫描没有密码和弱密码的共享,先到配置文件中填写猜测的用户名和密码,扫描过程中右侧出现的是扫描日志。

智能问诊的流程

本文介绍基于FastAPI构建的医疗多Agent系统MediAgent,通过症状分析、诊断推理与治疗建议等模块协同,实现从问诊到报告生成的完整工作流。系统采用前后端分离架构,结合MySQL、RabbitMQ与Docker实现工程化部署,支持异步化验结果接入。虽当前状态暂存于内存,但已具备可扩展性,未来可通过Redis持久化、消息队列联动及医疗安全机制完善,应用于慢病管理、辅助决策等场景,推动AI在医疗流程中的落地应用。

Joey 的工作空间~ 788

IMSL CNL 7.0.0 (x86-64)Crack

IMSL CNL 7.0.0 (x86-64)Crack intel的算法库破解文件,这是C++版本的破解文件

SSD测试工程精通系列 17|TRIM与UNMAP洪峰下的GC竞争(命令风暴与后台任务调度)

本文深入探讨NVMe SSD在面临TRIM/UNMAP命令洪峰时,后台垃圾回收(GC)与前端IO的竞争机制。从协议解析、固件调度、硬件架构到物理层信号,全面剖析命令风暴对QoS和WAF的影响。结合Samsung、Micron、Kioxia等厂商实测数据与失效案例,提供从测试注入、仪器抓取到工程取舍的全链路验证方案,助力资深测试工程师攻克存储性能断崖难题。

专注分享DPU、RDMA智能网卡/SSD(固态硬盘)产品测试与优化 350

Statistics and Machine Learning Toolbox

Statistics and Machine Learning Toolbox(带书签),MATLAB统计学习工具

基于 YOLOv8 的森林火灾检测系统(Web 版)

本项目面向林区早期火情识别场景,使用YOLOv8完成火焰(Fire)与烟雾(Smoke)两类目标的检测模型训练,并以FastAPI构建 Web 检测平台,把模型能力封装为可直接登录使用的系统。平台除常规的图片、批量、视频、摄像头检测外,还提供同图多权重对比、数据集浏览与标注核对、模型热切换,以及把训练搬到网页上的能力:可在浏览器配置超参数发起真实训练,训练中在线调整学习率、查看进度与动态曲线,训练完成后下载产物或直接应用到检测。

Michael_Jay的博客 71

HTML5 History API 详解:前端路由底层原理

pushState改 URL 不刷新popstate接浏览器导航服务端必须兜底 SPA 入口前端路由的本质不是“魔法”,而是:把「URL 字符串」变成「组件渲染函数」的映射表,再让浏览器历史栈和这张表保持同步。

2603_94941239的博客 224

身份验证漏洞专题(三):持久登录、密码重置与密码修改中的凭据绑定缺陷

密码登录与双因素认证是身份验证的主干流程,但一个完整的认证体系还依赖三类辅助机制:持久登录("记住我")、密码重置、密码修改。这三类机制的共同特征是:它们同样携带或验证凭据,同样直接决定认证状态的归属,但实现时获得的防护强度往往远低于登录页面本身。攻击者绕不开登录接口时,常常可以从这些辅助入口进入。

2401_85321170的博客 654

2026 年前端框架排行榜

前端框架是用于构建用户界面的工具集合,通过预设组件、网格系统和样式规范提升开发效率与可访问性。2026年主流框架包括:React(生态领先,适合全栈)、Next.js(SSR/SEO优化,主流选择)、Vue(学习友好,中小团队首选)、Angular(企业级稳定)、Svelte与Astro(性能突出)。趋势显示,服务端渲染、TypeScript、AI工具融合及轻量化成为关键方向。就业建议:优先学React+Next.js;追求易用选Vue;企业级项目可学Angular;追求极致性能可尝试Svelte或Astr

lxttzlove的博客 317

Vue 前端开发 AI 对话页面:流式消息渲染、文件上传

关键点是不能手动设置 Content-Type 为 multipart/form-data,必须由浏览器自动生成带有 boundary 的请求头,否则后端无法解析。思路:将对象序列化为 JSON 字符串,作为 FormData 的一个普通字段(如 formData.append(‘payload’, JSON.stringify(data))),后端接收该字段后再反序列化。若上传大文件(>10MB),需实现独立的分片上传接口,在提交对话前先获取文件 id 或 url,再随文本发送引用。移除输入框的禁用态;

2402_85729970的博客 400

前端要加密手机号,密钥却不能下发:一次一密的 ECDH + HKDF 方案(十六)

前端加密手机号需避免密钥暴露,采用ECDH协商临时密钥,结合HKDF派生并绑定协议上下文,使用AES-GCM实现认证加密。关键在于两端参数严格一致:曲线、编码格式、盐值与info字段逐字节相同。避免直接哈希共享秘密或日志泄露密钥,服务端返回临时公钥并签名,前端先验签再派生密钥,确保前向安全与防中间人攻击。最终密文结构包含公钥、nonce、密文与认证标签,支持自校验。

tantan的小记录 410

浏览器端素材压缩与上传实践:从 Canvas 到 WebCodecs 与 FFmpeg 回退

本文介绍浏览器端素材上传的完整处理链路,重点解决图片与视频超限问题。图片通过Canvas等比缩放与质量压缩,逐级优化至2MiB内;视频则优先使用WebCodecs硬件编码,结合分辨率降级、码率预算与FFmpeg WASM回退,确保在20MiB内完成转码。强调“先确认后处理”原则,避免无谓资源消耗,并通过多层能力检测保障兼容性与性能。核心思想:压缩成功 ≠ 上传成功,需独立校验。

林恒的博客 369

Geejing WebBuilder AI SQL:一句话生成查询的完整链路与「生成不执行」边界

企业里真正卡住数据核对的,很少是「不会写 SQL」。更常见的是三件小事叠在一起:这张表到底叫什么、日期字段是 `DATE` 还是字符串、当前这套库分页该用 `LIMIT` 还是别的写法。一个熟手要先翻一遍表结构,生手干脆把需求丢给 DBA,一来一回半天就过去了。

m0_60539919的博客 266

从一次检测到持续验证,重新认识 Web 应用安全测试

围绕漏洞修复后再次出现的问题,结合 Burp Suite DAST 与 GraphQL 示例,解析周期检测、证据管理和整改复测的实现思路。

m0_75220675的博客 337

副队长ES6+教程(3)--解构赋值

解构赋值是JavaScript中高效提取数组、对象数据的语法,支持按位置(数组)或属性名(对象)匹配,可设置默认值、跳过元素、使用剩余运算符。在Vue开发中广泛用于解构props、响应式数据及函数参数,提升代码简洁性与可读性。掌握其规则与常见陷阱,能显著提高开发效率。

编程副队长 301
上一篇: SOUL-Quiz Feature
下一篇: COMP0035 Data exploration
wx____codinghelp
博客等级 码龄2年 771粉丝 115原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值