The Operation couldn't be completed.(LaunchServicesError error 0.) 的完美解决方法

最新推荐文章于 2025-01-22 15:00:14 发布
最新推荐文章于 2025-01-22 15:00:14 发布
阅读量8.7k 收藏
点赞数 1
CC 4.0 BY-SA版权
分类专栏： iOS
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.youkuaiyun.com/www9500net_/article/details/52668921
本文介绍了在使用Xcode过程中遇到的“无法完成操作(LaunchServicesErrorerror0)”问题及其解决方案。提供了包括重置模拟器、清理项目等在内的多种解决方法，并分享了作者最终通过重新检出项目解决问题的经历。

摘要生成于 C知道 ，由 DeepSeek-R1 满血版支持， 前往体验 >

之前Xcode运行项目的时候，偶尔会出现这样一个窗口提示：

The Operation couldn't be completed.(LaunchServicesError error 0.)

之前的解决方法是:


1.点击当前的模拟器，点击IOS Simulator->Reset Content and Settings...->Reset，然后会重置模拟器，再次运行就可以了
2.点击Xcode->Product->Clean
3.将模拟器上的当前运行的app删除，再重新加载

三个步骤不行,那就试试三个步骤执行完之后,重启电脑



今天试了试这个三个办法,都不行,折腾了好久,是路径的问题,后来从svc重新检出,就ok了,记录下


SwiftUI+CoreData项目出现The operation couldn’t be completed(GenericObjCError error 0)错误的解决
享受开发，颠倒银河
03-19 2122
CoreData 上下文保存报 XXX is a required value 错误；执行 CoreData 上下文查询报 The operation couldn’t be completed. (Foundation._GenericObjCError error 0.) 等错误的解决
pyvisa.errors.VisaIOError: VI_ERROR_TMO (-1073807339): Timeout expired before operation completed
tianluchuan2005的博客
08-30 9191
在使用python的pyvisa库函数通过visa指令控制仪器时，出现‘pyvisa.errors.VisaIOError: VI_ERROR_TMO (-1073807339): Timeout expired before operation completed.’的报错。网上搜索了很久，找到一篇国外程序员讨论该问题的帖子，在里面发现有一段提到需要在打开设备后，定义write和read的终止符。Pass：有些设备不需要指定这个终止符也可以正常通讯， 看情况而定吧。运行结果正确，debug成功！...
iOS:The operation couldn’t be completed. (DVTCoreSimulatorAdditionsErrorDomain e
weixin_33753003的博客
10-29 385
前言 查看磁盘空间的时候，发现系统磁盘消耗太多空间。而且显示是系统消耗的。然后就大举的删除了很多关了XCode和模拟器本地资源。然后运行XCode。发现模拟器一直调不出来，并且XCode提示这个错误，如下 The operation couldn’t be completed. (DVTCoreSimulatorAdditionsErrorDomain error 0.) 解决方案： 重新启...
The operation couldn’t be completed. (LaunchServicesError error 0.)
MinggeQingchun的博客
08-18 986
在使用Xcode下的Targets进行多版本构建管理时，不停的切换两个版本 报出错误：The operation couldn’t be completed. (LaunchServicesError error 0.)，如下图所示：   分析一下原因是： 来回不停的切换两个target，导致资源文件加载方式变化上引起该问题，编译的缓存数据中含有残留的无效数据。 解决方法
关于解决The Operation Couldn't be Completed
热门推荐
haiooh的博客
05-14 4万+
运行的时候报错如图 运行编译代码成功，但是登陆模拟器失败，显示错误:The Operation couldn't be completed.(LaunchServicesError error 0.) 我上网查了一下，我试过第一1，2个方法 解决办法有：第1种方法.点击当前的模拟器，点击IOS Simulator->Reset Content and Settings
The operation couldn’t be completed. Unable to launch com.xxx because it has an invalid code signatu
操作猛如虎的博客
03-23 5078
无意中在 手机设置->通用->iPhone存储空间 中删除了安装的这个应用，再从Xcode往手机上跑，莫名其妙的就可以了，就可以了！网上各种方法都尝试了，包括手机也恢复了出厂，重启手机，重启Xcode，手机设置->通用->VPN与设备管理 里边并没有刻意同意的选项。手机弹窗提示：“需要互联网连接以验证是否信任开发者“xxx”。此App在验证前将不可用”我感觉自己也没做什么其他的操作，莫名其妙的，先记录一下。通过Xcode跑app到真机上出现错误。来回测试了四五个小时，依然是不行。
The operation couldn’t be completed.
Merlin的博客
07-14 994
The operation couldn’t be completed. (LaunchServicesError error 0.)  出现了这种情况，一般是模拟器某些配置数据不对(系统原因),clean一下或者reset模拟器就会正常了
visualvm报错The operation couldn’t be completed. Unable to locate a Java Runtime that supports jvisual
篱笆女人和狗的博客
01-22 616
visualvm报错The operation couldn’t be completed. Unable to locate a Java Runtime that supports jvisual
ios逆向入门笔记-HOOK-QQ登录
啥都不会的ios
08-01 3490
ios逆向入门笔记-HOOK-QQ登录选择目标砸壳基本调试Reveal+确定目标action及target利用Logos 进行 hookPsssss 选择目标 在经过之前的配置，这次有点小改动= 我给小5升级到了10.3.3 本次测试机型：iphone5 32位 10.3.3 不完美越狱 测试目标：QQ 砸壳 手机端下载好QQ后 usb连接到mac上 使用 frida-ios-dump进行砸壳 手机端安装 Frida for 32-bit devices 源地址 https://build.frida.r
Xcode 编译运行旧项目报错解决之路
10-10 1440
　　运行几年前做的项目，发现各种编译报错，一个一个解决记录下： 　　1、Xcode（Xcode9）编译运行报错，但是在 issue navigatior 栏看不到错误信息； 　　　　解决方案：在 show report navigator 栏查看编译错误信息： 　　Showing All Messages 　　The operation couldn’t be completed...
the operation couldn't be completed.
opentogether的博客
06-12 1071
the operation couldn't be completed.
The operation couldn’t be completed
MOKA
03-22 589
我也遇到了这个错误  是因为我打包提交的时候出现了 ERROR ITMS-90535错误  我按网上的方法 删除了一个key 然后就一直这样了 删掉的添加回来 key 遇到同样的问题，把删除的文件重新加上重新运行就行了。。上传的时候报错，再按照错误提示 删除掉对应的 Executable file..(不是所有的Executable file 都需删除。。看错误提示)  楼上说的
The operation couldn’t be completed. (LaunchServicesError error 0.)问题
s18782934812的专栏
05-16 680
The operation couldn’t be completed. (LaunchServicesError error 0.)问题
The operation couldn't be completed.(Cocoa error 256)
经验之外
01-19 4956
在使用initWithContentsOfURL的时候，出现如题所示的错误，查网络没问题，在编码上，服务器和客户端都是utf8，好像也没什么问题，找来找去也没发现什么不对，因在url参数中我用了0|5的形式，难道是那个竖线的问题？索性换成0_5的形式试试，就ok了！看来真是url中竖线的问题，早听说Google不推荐在URL里使用竖线，懒得究其原因，记住便是。
JVisualVM:The operation couldn’t be completed. Unable to locate a Java Runtime that supports jvisual
idooy的学习笔记
09-11 4197
jvisualvm指令不支持
The operation couldn’t be completed.(LaunchServicesError error 0.)解决方法
xinsiibngquan的专栏
03-01 581
解决方法  product - clean 彻底解决的方法 ：重启模拟器
The operation couldn't be completed.(LaunchServicesError error 0.)问题描述和解决方法
11-26 8287
The operation couldn’t be completed.(LaunchServicesError error 0.)模拟器问题描述和解决方法 在iOS模拟器下运行APP时，点击清除缓存按钮，清除NSHomeDirectory下所有文件时，第二次运行模拟器就会出现如下错误提示。真机下不会出现。
We are given a log file that contains a sequence of events related to an update process on a device. The log is from the perspective of an automated test system (autotest) that is monitoring the update process. The key events in the log: 1. The test system is trying to establish an SSH connection to the device at 192.168.231.225. Initially, the connection is down, so it tries to start a new connection. 2. At 04:38:48, there's a timeout error waiting for the main SSH connection to come up. 3. Then, at 04:39:06, we see that the device has switched slots (likely due to an update) and the test breaks out of a waiting loop. 4. The test then checks the status of the update engine by running `update_engine_client --status` via SSH. The output shows that the update is in the DOWNLOADING state with progress at about 13%. 5. The test then retrieves the update_engine log and we see the log entries from the device's update_engine daemon. The update_engine log shows: - The update_engine starts at 04:39:01. - It identifies that the device is booted from slot A (slot 0). - It's an unofficial build, so periodic update checks are blocked. - It begins an update for a DLC (Downloadable Content) called "timeofday-dlc". The download URL is provided, and the download completes successfully (HTTP 200) at 04:39:05, with 23064576 bytes downloaded. - After verifying the hash, the DLC is mirrored and set to Active. - Then, the update_engine starts another update for a different DLC: "ml-dlc-a97333ed-3157-49a3-b503-2d2d3f23c81d". The log shows the installation starting for this DLC. However, the test then fails because it cannot find the update_engine logs to verify the update. The last lines in the log are: ``` 06/05 04:39:09.952 DEBUG| test:0439| Test failed due to update_engine logs are missing. Cannot verify update.. Exception log follows the after_iteration_hooks. ``` This indicates that the test expected to find update_engine logs for the entire update process, but at the time it checked (04:39:09), the log for the second DLC update was not available (or the test looked in the wrong place). But note: the test did retrieve the update_engine log at 04:39:09.856 (the file `update_engine.20250604-213901`). However, that log only covers the first DLC (timeofday-dlc) and the beginning of the second DLC (ml-dlc). The second DLC update was still in progress when the test checked. The test then, at 04:39:09.920, runs `ls -t -1 /var/log/update_engine/` and gets only one log file: `update_engine.20250604-213901`. This is the same log that was previously retrieved. The test then fails because it expects to see logs for the entire update (which might include multiple log files or a more recent one) but only one is present. It's possible that the update_engine daemon rotates logs and the test expects a new log for the second update? However, the log we see spans from 04:39:01 to 04:39:07 (and beyond, but the test only retrieved up to 04:39:09.913 in the log). The test failure message says "update_engine logs are missing", meaning it couldn't find the logs it expected. Alternatively, the test might be looking for a log entry that confirms the entire update (including the second DLC) completed, but the log we have only shows the start of the second DLC update. Given the information, the problem appears to be that the test is failing because it cannot find the expected update_engine logs to verify the update. This could be because: - The test is not waiting long enough for the update to complete and the logs to be written. - The update_engine log rotation might have occurred and the test is not accounting for the latest log file. - The test expects a specific log entry that is not present in the retrieved log. However, from the provided log, we can see that the update_engine was in the middle of updating the second DLC when the test checked. The test then immediately tried to get the logs again and found only one log file, which it had already retrieved. The test code seems to be in a state where it breaks out of the waiting loop because it detected a slot switch (which happened for the first DLC) but then it tries to verify the entire update (which includes multiple DLCs) and fails because the second DLC update was still ongoing and the logs were not complete. In summary, the issue is that the test did not wait for the entire update (all DLCs) to complete before attempting to verify the logs. It only waited for the first DLC to complete and the slot switch, but then proceeded to check the logs while the second DLC update was still in progress. Recommendation: The test should wait until the update_engine status indicates that the update is fully completed (e.g., IDLE) and then verify the logs. 翻译成中文
最新发布
06-06
嗯，用户现在提出的问题相当具体且专业，是要解决自动化测试系统中因日志不完整导致设备更新验证失败的问题。从用户引用的内容来看，ta应该是个技术背景深厚的工程师，可能负责设备固件更新相关的测试框架维护。有趣...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值