openwrt 程序开机启动

转自：http://wiki.openwrt.org/doc/techref/initscripts

创建文件：/etc/init.d/example

#!/bin/sh /etc/rc.common
# Example script
# Copyright (C) 2007 OpenWrt.org
 
START=10
STOP=15
 
start() {        
        echo start
        # commands to launch application
}                 
 
stop() {          
        echo stop
        # commands to kill application 
}

• START=10 - this means the file will be symlinked as /etc/rc.d/S10example - in other words, it will start after the init scripts with START=9 and below, but before START=11 and above.
• STOP=15 - this means the file will be symlinked as /etc/rc.d/K15example - this means it will be stopped after the init scripts with STOP=14 and below, but before STOP=16 and above. This is optional.

如果程序需要依赖其他服务，例如网卡，则需要在网卡之后启动，即START的数值要相对于网卡的值大，具体打多少需要试验下。

然后执行命令

/etc/init.d/example enable

并重新启动路由器