ICN6211转接IC：MIPI转RGB芯片

最新推荐文章于 2025-11-04 12:15:13 发布

原创最新推荐文章于 2025-11-04 12:15:13 发布 · 3.7w 阅读

3 ·

CC 4.0 BY-SA版权

文章标签：

#ICN6211 #MIPI转RGB #转接IC #转接芯片 #转换芯片

本文详细介绍了ICN6211，这是一款48脚QFN封装的MIPI转RGB转接芯片。内容包括其功能模块图、系统应用示意图和管脚图，揭示了该芯片在MIPI信号转换至RGB显示应用中的作用。

1 Introduction
ICN6211 is a bridge chip which receives MIPI® DSI inputs and sends RGB outputs.
MIPI® DSI supports up to 4 lanes and each lane operates at 1Gbps maximum; the totally maximum input bandwidth is 4Gbps; and the MIPI defined ULPS(ultra-low-power state) is also supported. ICN6211 decodes MIPI® DSI 16bpp RGB565 and 18bpp RGB666 and 24bpp RGB888 packets.
The RGB output 18 or 24 bits pixel with pixel clock range of 25MHz to 154MHz.
ICN6211 support video resolution up to FHD (1920x1080) and WUXGA(1920x1200).
ICN6211 adopts QFN48 pins package.
1.1 Feature List
 Supports MIPI® D-PHY Version 1.00.00 and MIPI® DSI Version 1.02.00.
 Single Channel DSI Receiver with One, Two, Three and Four lanes configurable, each lanes operates up to 1Gbps.
 Receives 16bpp RGB565 and 18bpp RGB666 and 24bpp RGB888 packets defined by DSI.
 Supports MIPI Low State, Ultra-Low Power State, Shut Down mode.
 Output RGB with pixel clock range of 25MHz to 154MHz.
 RGB output supports flexible swap.
 Can adjust RGB Clock output phase(with 1/4, 1/2, 3/4 and fine adjust option) .
 Provides FRC/Hi-FRC function to improve 18bpp image performance.
 power supply : 1.8V/2.5V/3.3V for RGB output; 1.8V/2.5V/3.3V for MIPI and digital IO.
 provide I2C slave interface.

 package: QFN48-pins with e-pad.

2 Functional Block Diagram
Following figure shows a functional block diagram of the ICN6211.