openwrt ntp服务器修改,[已解决]openwrt如何同步时间

root@OpenWrt:~# ntpd -n -d -p stdtime.gov.hk

ntpd: resolved peer stdtime.gov.hk to 118.143.17.82

ntpd: sent query to 118.143.17.82

ntpd: reply from 118.143.17.82: reach 0x01 offset -0.006161 delay 0.003906 status 0x24 strat 1 refid 0x4d525300 rootdelay 0.000000

ntpd: sent query to 118.143.17.82

ntpd: reply from 118.143.17.82: reach 0x03 offset -0.006240 delay 0.004142 status 0x24 strat 1 refid 0x4d525300 rootdelay 0.000000

ntpd: sent query to 118.143.17.82

ntpd: reply from 118.143.17.82: reach 0x07 offset -0.005990 delay 0.003906 status 0x24 strat 1 refid 0x4d525300 rootdelay 0.000000

ntpd: sent query to 118.143.17.82

ntpd: reply from 118.143.17.82: reach 0x0f offset -0.005922 delay 0.003906 status 0x24 strat 1 refid 0x4d525300 rootdelay 0.000000

ntpd: sent query to 118.143.17.82

ntpd: reply from 118.143.17.82: reach 0x1f offset -0.005893 delay 0.003906 status 0x24 strat 1 refid 0x4d525300 rootdelay 0.000000

ntpd: sent query to 118.143.17.82

ntpd: reply from 118.143.17.82: reach 0x3f offset -0.001876 delay 0.013546 status 0x24 strat 1 refid 0x4d525300 rootdelay 0.000000

Alarm clock

root@OpenWrt:~#你试试行不行。我的路由时间本来已经同步了，运行了上面的指令，不知道时间有没有改变。

ntpd 的命令：

root@OpenWrt:~# ntpd -h

ntpd: invalid option -- h

BusyBox v1.19.4 (2014-01-26 22:27:51 CST) multi-call binary.

Usage: ntpd [-dnqNwl] [-S PROG] [-p PEER]...

NTP client/server

-d      Verbose

-n      Do not daemonize

-q      Quit after clock is set

-N      Run at high priority

-w      Do not set time (only query peers), implies -n

-l      Run as server on port 123

-S PROG Run PROG after stepping time, stratum change, and every 11 mins

-p PEER Obtain time from PEER (may be repeated)

root@OpenWrt:~#