以下为安装tgt服务,(SCSI Target服务)
#apt install tgt -y
以下命令为创建一个Target其tid为1名称为iqn.2020-11.com:cmtg
#tgtadm --lld iscsi --mode target --op new --tid 1 --targetname iqn.2020-11.com:cmtg
以下命令为查看Target记录是否已创建
#tgtadm --lld iscsi --mode target --op show
Target 1: iqn.2020-11.com:cmtg
System information:
Driver: iscsi
State: ready
I_T nexus information:
LUN information:
LUN: 0
Type: controller
SCSI ID: IET 00010000
SCSI SN: beaf10
Size: 0 MB, Block size: 1
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: null
Backing store path: None
Backing store flags:
Account information:
ACL information:
以下命令让任何人都能连接到该Target
#tgtadm --lld iscsi --mode target --op bind --tid 1 -I ALL
以下命令为创建一个新的LUN号,/dev/sda可以是一个硬盘,或分区,或卷组,或RAID
#tgtadm --lld iscsi --mode logicalunit --op new --tid 1 --lun 1 -b /dev/sda
以下命令查看icssi服务状态
#tgtadm --lld iscsi --mode target --op show
Target 1: iqn.2020-11.com:cmtg
System information:
Driver: iscsi
State: ready
I_T nexus information:
LUN information:
LUN: 0
Type: controller
SCSI ID: IET 00010000
SCSI SN: beaf10
Size: 0 MB, Block size: 1
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: null
Backing store path: None
Backing store flags:
LUN: 1
Type: disk
SCSI ID: IET 00010001
SCSI SN: beaf11
Size: 500108 MB, Block size: 512
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: rdwr
Backing store path: /dev/sda
Backing store flags:
Account information:
ACL information:
ALL
直接Windows搜索iSCSI发起程序(没有启动服务器回提醒你启动下的)
输入服务器IP快速连接就OK了~,记录2020/11/12
补充:(2020/11/16)
如果配置正确的话可以使用以下命令保存到配置
tgt-admin --dump > /etc/tgt/targets.conf
版权声明:若无特殊注明,本文皆为《
CM部落 》原创,转载请保留文章出处。
本文链接:Ubuntu iSCSI服务-Windows挂载-简易教程 https://itkz.cn/note/138.html
正文到此结束