分布式文件系统MFS(moosefs)

本文通过Sery与MFS作者的邮件往来,详细解释了MFS文件系统中删除文件后空间未立即释放的原因及解决办法。文章指出,MFS不会立即擦除已删除的文件,而是将其保留在回收站内以便恢复。用户可以通过配置回收站保留时间或手动清空回收站来调整行为。
与软件作者的邮件往来:
 
Hello Sery,
Thank you very much for the most impressive contribution!!! Can we send
your document to Chinese users of MFS? Or maybe you are going to publish it
on your web site? I would be very glad to provide a link from our web
page.
Best regards,
Pawel Kalinowski

> hi Pawel Kalinowski

> Thank for your help! i have run a MFS applicaton in my work environment 
. It is ok!

> I wrote my MFS operation document by Chinese . it is in attache. I hope
it is useful to other.

> thank you very much!


> Best regards,
> sery

> 2009-03-30



> sery



> 发件人: MooseFS
> 发送时间: 2009-02-16  20:50:38
> 收件人: sery" "
> 抄送:
> 主题: Re: need to help about moosefs

> Hi Sery,
> Thanks for your e-mail! I hope your MFS installation will be serving
you
> fine!
> Everything is OK! MFS is not erasing files immediately to let you
revert
> the delete operation.
> You can configure for how long files are kept in trash and empty the
trash
> manually (to release the space).
> There are more details here:
[url]http://moosefs.com/pages/userguides.html#2[/url]
> in section "Operations specific for MFS"
> In short - the time of storing a deleted file can be verified by the
> mfsgettrashtime command and changed with mfssettrashtime.
> Best regards,
> Pawel Kalinowski
> Support Manager / MFS
> > hi
> > I developed a mfs system, It is good work.I mfsmount mfs to a
client,but
> when I delete files or directories the mfs's size didn't reduce.please
tell
> me about this.thank you!
> >
> > I am sorry,I  am Chinese,I am not good at English.
> >
> > 2009-02-16
> >
> >
> >
> > sery

 


















本文转自sery51CTO博客,原文链接: http://blog.51cto.com/sery/143635 ,如需转载请自行联系原作者






本项目通过STM32F103C8T6单片机最小系统,连接正点原子ESP8266 WiFi模块,将模块设置为Station模式,并与电脑连接到同一个WiFi网络。随后,STM32F103C8T6单片机将数据发送到电脑所在的IP地址。 功能概述 硬件连接: STM32F103C8T6单片机与正点原子ESP8266 WiFi模块通过串口连接。 ESP8266模块通过WiFi连接到电脑所在的WiFi网络。 软件配置: 在STM32F103C8T6上配置串口通信,用于与ESP8266模块进行数据交互。 通过AT指令将ESP8266模块设置为Station模式,并连接到指定的WiFi网络。 配置STM32F103C8T6单片机,使其能够通过ESP8266模块向电脑发送数据。 数据发送: STM32F103C8T6单片机通过串口向ESP8266模块发送数据。 ESP8266模块将接收到的数据通过WiFi发送到电脑所在的IP地址。 使用说明 硬件准备: 准备STM32F103C8T6单片机最小系统板。 准备正点原子ESP8266 WiFi模块。 将STM32F103C8T6单片机与ESP8266模块通过串口连接。 软件准备: 下载并安装STM32开发环境(如Keil、STM32CubeIDE等)。 下载本项目提供的源代码,并导入到开发环境中。 配置与编译: 根据实际需求配置WiFi网络名称和密码。 配置电脑的IP地址,确保与ESP8266模块在同一网络中。 编译并下载程序到STM32F103C8T6单片机。 运行与测试: 将STM32F103C8T6单片机与ESP8266模块上电。 在电脑上打开网络调试工具(如Wireshark、网络调试助手等),监听指定端口。 观察电脑是否接收到来自STM32F103C8T6单片机发送的数据。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值