AutoLISP单选按钮RADIO_BUTTON设计插入图块

最新推荐文章于 2024-01-27 11:14:20 发布

转载最新推荐文章于 2024-01-27 11:14:20 发布 · 766 阅读

本文介绍使用AutoLISP创建DCL对话框，实现带有单选按钮的图块插入功能。通过设置不同选项，用户可以选择图块的设计者及插入比例。

AutoLISP单选按钮RADIO_BUTTON设计插入图块，DCL对话框代码如下。

dia6b:dialog {
    label = "RADIO_BUTTON单选按钮" ;
    :text {
        alignment = centered ;
        label = "插入图块" ;
    }
    :row {
        :boxed_radio_column {
            label = "设计者" ;
            :radio_button {
                key = "rb11" ;
                label = "唐僧" ;
            }
            :radio_button {
                key = "rb12" ;
                label = "悟空" ;
            }
            :radio_button {
                key = "rb13" ;
                label = "八戒" ;
            }
            :radio_button {
                key = "rb14" ;
                label = "沙僧" ;
            }
        }
        :boxed_radio_column {
            label = "比例" ;
            :radio_button {
                key = "rb21" ;
                label = "1/1" ;
            }
            :radio_button {
                key = "rb22" ;
                label = "1/30" ;
            }
            :radio_button {
                key = "rb23" ;
                label = "1/50" ;
            }
            :radio_button {
                key = "rb24" ;
                label = "1/100" ;
            }
            :radio_button {
                key = "rb25" ;
                label = "1/200" ;
            }
        }
    }
    :edit_box {
        alignment = centered ;
        edit_limit = 8 ;
        edit_width = 8 ;
        fixed_width = true ;
        key = "dwgnum" ;
        label = "编号" ;
    }
    spacer_1;
    :row {
        alignment = centered ;
        fixed_width = true ;
        :button {
            key = "ins_ok" ;
            label = "插入图块" ;
            width = 8 ;
        }
        :spacer {
            width = 8 ;
        }
        cancel_button;
    }
}

LSP文件代码如下。

(defun c:dia6b ()
    (setvar "cmdecho" 0)
    (setq blkname "dia6att")
    (dcl_dia6b)
    (prin1)
)
(defun dcl_dia6b ()
    (setq dcl_id (load_dialog "dia6b"))
    (new_dialog "dia6b" dcl_id)
    (setq defkey1 "rb14"
      defkey2 "rb21"
    )
    (set_tile defkey1 "1")
    (set_tile defkey2 "1")
    (setq name (get_attr defkey1 "label"))
    (setq ssca (get_attr defkey2 "label"))
    (action_tile "rb11" "(setq name (get_attr $key \"label\"))")
    (action_tile "rb12" "(setq name (get_attr $key \"label\"))")
    (action_tile "rb13" "(setq name (get_attr $key \"label\"))")
    (action_tile "rb14" "(setq name (get_attr $key \"label\"))")
    (action_tile "rb21" "(setq name (get_attr $key \"label\"))")
    (action_tile "rb22" "(setq name (get_attr $key \"label\"))")
    (action_tile "rb23" "(setq name (get_attr $key \"label\"))")
    (action_tile "rb24" "(setq name (get_attr $key \"label\"))")
    (action_tile "rb25" "(setq name (get_attr $key \"label\"))")
    (action_tile "ins_ok" "(ok_dia6b) (done_dialog 1)")
    (setq dd (start_dialog))
    (if    (= dd 1)
    (progn
        (setq inspt (getpoint "\n选取属性图块插入点:"))
        (command "insert" blkname inspt 1 1 0 dwgnum name ssca)
    )
    )
)
(defun ok_dia6b    ()
    (setq dwgnum (get_tile "dwgnum"))
)