对于Solaris系统,是通过一系列配置文件(文本)来存储和管理主机ip和主机名信息,通过编辑器修改这些配置文件就可以完成相关的配置。
一、修改主机ip
1、配置hosts文件
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
|
[root@solaris186:/]# cat /etc/hosts # Internet host table :: 1 localhost
127.0. 0.1 localhost
192.168. 8.11 solaris186 loghost
[root@solaris186:/]# hostname solaris186 [root@solaris186:/]# vi /etc/hosts # Internet host table # :: 1 localhost
127.0. 0.1 localhost
192.168. 8.11 node1 loghost
|
2、查看网卡信息
1
2
3
4
5
6
|
[root@solaris186:/]# ifconfig -a lo0: flags= 2001000849 <UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0. 0.1 netmask ff000000
e1000g0: flags= 1000843 <UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168. 8.11 netmask ffffff00 broadcast 192.168. 8.255
ether 8 : 0 : 27 : 28 :b1:8c
|
3、修改hostname.e1000g0
1
2
3
4
5
6
7
8
|
[root@solaris186:/]# cat /etc/hostname.e1000g0 solaris186 [root@solaris186:/]# vi /etc/hostname.e1000g0 node1 [root@solaris186:/]# cat /etc/hostname.e1000g0 node1 |
4、修改netmasks(子网掩码)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
|
[root@solaris186:/]# cat /etc/netmasks # # The netmasks file associates Internet Protocol (IP) address # masks with IP network numbers.
# # network-number netmask # # The term network-number refers to a number obtained from the Internet Network
# Information Center. # # Both the network-number and the netmasks are specified in
# "decimal dot" notation, e.g:
# # 128.32. 0.0 255.255. 255.0
# 192.168. 8.0 255.255. 255.0
|
5、修改网关配置
1
2
3
4
5
6
7
8
9
10
11
12
13
|
[root@solaris186:/]# vi /etc/defaultrouter 192.168. 8.1
[root@solaris186:/]# cat /etc/defaultrouter 192.168. 8.1
[root@solaris186:/]# netstat -nr Routing Table: IPv4 Destination Gateway Flags Ref Use Interface
-------------------- -------------------- ----- ----- ---------- --------- 192.168. 8.0 192.168. 8.11 U 1 1 e1000g0
224.0. 0.0 192.168. 8.11 U 1 0 e1000g0
127.0. 0.1 127.0. 0.1 UH 1 50 lo0
|
总结:
和主机ip有关的配置文件
/etc/hosts
/etc/hostname.xxxx(网卡名)
/etc/netmaks
/etc/defaultrouter
/etc/inet/ipnodes
二、修改主机名
1、配置hosts文件
1
2
3
4
5
|
[root@solaris186:/]# cat /etc/hosts # Internet host table :: 1 localhost
127.0. 0.1 localhost
192.168. 8.11 node1 loghost
|
2、修改hostname.e1000g0
1
2
3
4
5
6
7
8
|
[root@solaris186:/]# cat /etc/hostname.e1000g0 solaris186 [root@solaris186:/]# vi /etc/hostname.e1000g0 node1 [root@solaris186:/]# cat /etc/hostname.e1000g0 node1 |
3、修改nodename
1
2
3
4
5
6
7
8
|
[root@solaris186:/]# cat /etc/nodename solaris186 [root@solaris186:/]# vi /etc/nodename node1 [root@solaris186:/]# cat /etc/nodename node1 |
4、查看ipnodes
1
2
3
4
5
6
7
|
[root@solaris186:/]# cat /etc/inet/ipnodes # # Internet host table # :: 1 localhost
127.0. 0.1 localhost
192.168. 8.11 node1 loghost
|
总结:
和主机名有关的配置文件
/etc/hosts
/etc/hostname.xxxx(网卡名)
/etc/nodename
/etc/inet/ipnodes
本文转自 客居天涯 51CTO博客,原文链接:http://blog.51cto.com/tiany/1606699,如需转载请自行联系原作者