How To Driver BCM43xx Wireless Ethernet Under Fedora Core 5

最新推荐文章于 2019-03-12 23:17:12 发布

转载最新推荐文章于 2019-03-12 23:17:12 发布 · 106 阅读

CC 4.0 BY-SA版权

原文链接：http://www.cnblogs.com/b2tang/archive/2008/12/05/1348680.html

本文介绍如何在HP Compaq nx632x笔记本电脑上安装和配置BCM43xx无线网卡驱动，运行环境为Fedora Core 5 (Kernel-2.6.22)。主要内容包括：编译内核、下载并编译bcm43xx-fwcutter、获取固件、安装网络管理工具等步骤。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

Linked From http://www.2beanet.com/

How To Driver BCM43xx Wireless Ethernet Under Fedora Core 5

Summary:

Hardwar & Software: HP Compaq nx632x, Fedora Core 5(Kernel-2.6.22)

This article mainly introduce how to driver BCM43xx wireless ethernet in the environment above

Step:

1) Compile kernel, download the latest kernel linux-2.6.22, and compile the kernel according to the hardware, the items about BCM43xx wireless ethernet are mainly the belowing:

2) download bcm43xx-fwcutter.tar.bz2, untar it and compile

        [root@myforever wireless]# tar jxvf bcm43xx-fwcutter.tar.bz2

        [root@myforever wireless]# cd bcm43xx-fwcutter

        [root@myforever bcm43xx-fwcutter]# make

        [root@myforever bcm43xx-fwcutter]#

       3） download wl_apsta-3.130.20.0.o

       http://downloads.openwrt.org/sources/wl_apsta-3.130.20.0.o

       4） get the firmware

       [root@myforever bcm43xx-fwcutter]# ./bcm43xx-fwcutter -w /lib/firmware wl_apsta-3.130.20.0.o

       the firmware needed by the BCM43xx is created in /lib/firmware

5） configure the wireless ethernet

        first of all, we should install the management tool for wireless ethernet

       [root@myforever /]# yun install NetworkManager

        after the installation, we could configure the wireless ethernet

[root@myforever /]# NetworkManager

there is a small icon at down right corner, click it and select the wireless ethernet, do some configuration.

转载于:https://www.cnblogs.com/b2tang/archive/2008/12/05/1348680.html