Chassis
Description
Catalyst 6000 Series Switch
Catalyst 6006 switch—6-slot chassis
 
Catalyst 6009 switch—9-slot chassis
Catalyst 6500 Series Switch
Catalyst 6503 switch—3-slot chassis
 
Catalyst 6506 switch—6-slot chassis
 
Catalyst 6509 switch—9-slot chassis
 
Catalyst 6509-NEB switch—9-slot vertical chassis
 
Catalyst 6509-NEB-A switch—9-slot vertical chassis
 
Catalyst 6513 switch—13-slot chassis
Cisco 7600 Series Router
Cisco 7603 router—3-slot chassis
 
Cisco 7606 router—6-slot chassis
 
Cisco 7609 router—9-slot vertical chassis
 
Cisco 7613 router—13-slot chassis
 
 
Figure 1 Positioning the Module in a Horizontal Slot Chassis
58569.jpg
Figure 2 Clearing the EMI Gasket in a Horizontal Slot Chassis
58570.jpg
Figure 3 Ejector Lever Closure in a Horizontal Slot Chassis
58571.jpg
Figure 4 Positioning the Module in a Vertical Slot Chassis
63585.jpg
Figure 5 Clearing the EMI Gasket in a Vertical Slot Chassis
63586.jpg
Figure 6 Ejector Lever Closure in a Vertical Slot Chassis
63587.jpg
 
Enter the show module or show port [mod_num/port_num] command to verify that the system acknowledges the new modules and has brought them online.
This example shows the output of the show module command: 
Console> show module

Mod Slot Ports Module-Type               Model               Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1   1    2     1000BaseX Supervisor      WS-X6K-SUP1A-2GE    yes ok

15  1    1     Multilayer Switch Feature WS-F6K-MSFC         no  ok

8   8    48    10/100BaseTX Ethernet     WS-X6248-RJ-45      no  ok

9   9    48    10/100BaseTX Ethernet     WS-X6348-RJ-45      yes ok


Mod Module-Name         Serial-Num

--- ------------------- -----------

1                       SAD03436055

15                      SAD03432597

9                       SAD03414268


Mod MAC-Address(es)                        Hw     Fw         Sw

--- -------------------------------------- ------ ---------- --------------

1   00-30-80-f7-a5-06 to 00-30-80-f7-a5-07 1.0    5.2(1)     6.1(0.12)

    00-30-80-f7-a5-04 to 00-30-80-f7-a5-05

    00-30-a3-4a-a0-00 to 00-30-a3-4a-a3-ff

15  00-d0-bc-ee-d0-dc to 00-d0-bc-ee-d1-1b 1.2    12.0(3)XE1 12.0(3)XE1

8   00-d0-c0-c8-83-ac to 00-d0-c0-c8-83-db 1.1    4.2(0.24)V 6.1(0.37)FTL

9   00-50-3e-7c-43-00 to 00-50-3e-7c-43-2f 0.201  5.3(1)


Mod Sub-Type                Sub-Model           Sub-Serial  Sub-Hw

--- ----------------------- ------------------- ----------- ------

1   L3 Switching Engine     WS-F6K-PFC          SAD03451187 1.0

9   Inline Power Module     WS-F6K-VPWR                     1.0

Console>

Checking Connectivity

To check connectivity on any switching module port, perform these tasks:
Task
Command
•blank.gifPing a host.
ping host
•blank.gifIf the host is unresponsive, check the IP address of the switch and default IP route, if appropriate.
show interface
show ip route

For example, to ping a host named server1, enter this command: 
Console> ping server1

server1 is alive

Console>